REAR LIFT SUPPORT DOG HARNESS
INSTRUCTION MANUAL
PARTS INCLUDED
1 Back support lift dog harness 1 Lifting leash
Before lifting your dog, ensure all buckles are clipped, and straps are
adjusted securely. Make sure straps will not pinch or chafe the dog.
After checking the harness, use the handle on the rear harnesses to
gently help your dog get up, or move around. You can also attach your
own leash to the lifting leash to help assist in lifting your dog.
3
1
Buckle up the belly strap. Loop each rear leg strap under your dog’s legs
and fasten the buckles over the hips. Adjust all the straps for a comfortable
fit. We recommend fitting two fingers between your dog and the straps.
2
The plastic male protection
piece in this belly strap helps
relieve pressure on a male dog’s
sensitive area. If your dog is a
female, remove the piece before
buckling up.
Before draping the rear support harness over your dog’s back, unfasten
the buckles of both leg loops and one of the side buckles on the belly
strap.
Male protection piece
WARNINGS AND CAUTIONS
1. Harness is not for tie out
2. Do not leave harness on dog for extended period of time.
4. Do not leave your dog unattended while product is being used
3. Due to the nature of use, be sure to check if the harness is chafing or pinching
your dog.
