•
ATX/Micro ATX specification compliant
•
front door made of Aluminium
•
screwless fan holder at rear panel and front panel for 12cm fan,
additional 12cm fan installation
• screw-
less for 5.25“ devices and slots
•
four detachable HDD shockproof trays for easy installation and
reducing vibration for silent operation
•
90° sideward detachable HDD cage design for easy assembly
•
screwless installation f
•
fan holder for easy installation
• on-top
front access interfaces USB2.0/
• integrated
TAC 2.0
Features
62RABS-ET
ATX Gaming Tower
ATX/Micro ATX specification compliant
front door made of Aluminium
screwless fan holder at rear panel and front panel for 12cm fan,
additional 12cm fan installation
(screws) at side panel possible
less for 5.25“ devices and slots
four detachable HDD shockproof trays for easy installation and
reducing vibration for silent operation
90° sideward detachable HDD cage design for easy assembly
screwless installation f
or up to 7 expansion cards.
fan holder for easy installation
front access interfaces USB2.0/
Audio
TAC 2.0
at side panel for maximum CPU cooling
screwless fan holder at rear panel and front panel for 12cm fan,
(screws) at side panel possible
four detachable HDD shockproof trays for easy installation and
90° sideward detachable HDD cage design for easy assembly
at side panel for maximum CPU cooling
Housing Type
Model
Dimensions with Front Bezel
Form Factor
Housing Material
Weight
Front Ports
Expansion Slots
Drive Space intern
Drive Space extern
Maximum Length of Graphics
Ordering Stock Hilden
Specifications
62RABS-ET
ATX Gaming Tower
Midi Tower
62RA
473/190/410 mm
(T/B/H)
AT / ATX / Micro ATX
0.6 mm SECC - Steel
6,0 kg ( 7,0 kg Brutto )
2 x USB 2.0,
Audio IN/OUT
7 Slots
4 x 3,5“ (8,89cm)
3 x 5,25” (13,34cm) / 2 x 3,5” (8,89cm)
Maximum Length of Graphics
up to 27,5cm
62RABS-UT
(T/B/H)
Audio IN/OUT
3 x 5,25” (13,34cm) / 2 x 3,5” (8,89cm)
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
