Page is loading ...
HK 670
STEREO INTEGRATED AMPLIFIER
This is the one to beat in the two-channel amp arena. To provide the distinctive, dynamic, lively sound quality that made
Harman Kardon a legend, the HK 670 is endowed with high-current capability, achieved through very impressive current
storage capacity. The significance of the ability to deliver 2 x 75-watt of serious power into virtually any loudspeaker load
will be clear the first time your speakers are connected. While others offer inflated specifications, the HK 670
delivers performance.
high-current capability
ultrawide bandwidth
phono input
A/B speaker selection
digital loop through
Specifications
•Continuous Average Power (FTC): 75 watts x 2 @ 8
ohms (20Hz – 20kHz, <0.09% THD, both channels
driven); High-Current Capability: ±75 amps
•General – Dimensions (H x W x D): 110mm x 441m x
389mm; Weight: 12.6kg
[NOTE: Depth measurement includes knobs, buttons
and terminal connections; height measurement
includes feet and chassis.]
Features
•75W x 2 Into 8 Ohms, 20Hz – 20kHz at <0.09%
THD, Both Channels Driven Simultaneously
•High-Current (±75 Amps) Capability Amplifier
•Ultrawide-Bandwidth Amplifier Design
•Five Audio Inputs
•High-Quality Phono Input
•Digital Loop Through for Easy Digital Recordings
•Tape Monitor Loop
•Remote A/B Speaker Switching
•IR Remote Extension Jacks
•Harman Kardon System Remote
All features and specifications are subject to change
without notice.
Harman Kardon is a registered trademark,
and Power for the Digital Revolution is a trademark,
of Harman Kardon, Inc.
high-current capability
ultrawide bandwidth
phono input
A/B speaker selection
digital loop through
/
