ABT-100A
1
Customer Service.
. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
. This product is not a toy! Children should be supervised to ensure that
they do not play with the appliance.
. Do not use the speaker in direct sunlight or high humidity conditions.
. Do not throw in fire, crush, puncture, dismantle or otherwise damage
the batteries.
. Do not expose batteries to heat or fire as they may explode.
. Do not dispose of batteries in your household waste. Contact your local
council for information on disposal or recycling.
2
Input
USB or microSD card into the respective slots to play music
When using for the first time, please do an automatic channel scanning.
Microphone function is activated once a microphone is plugged into the
MIC IN port.
microSD
microphone volume.
microphone volume.
microSD card
On/O/Master Volume:
Rotate the dial to the right (past the initial click) to turn on the unit.
Rotate the dial left or right to adjust volume.
Rotate fully to the left to turn o the unit.
MICROPHONE FUNCTION DESCRIPTION
3
'blue' will be displayed on the LED Display.
you will hear an audio prompt.
Use a 3.5mm auxiliary audio cable to connect your external device’s
(e.g. mp3 player) ‘Line Out’ port to the ‘AUX IN’ port on the speaker.
.Turn on your external device and start playback.
If you have two ABT-100A speakers, you can use them together in
Bluetooth mode to enjoy stereo sound.
Note:
Stereo audio only works from Bluetooth source, and only when both speakers
are in Bluetooth mode.
Your Bluetooth-enabled device must be connected only to one of the
2 speakers via Bluetooth. If connected to both, disconnect from one.
1.Turn on the 2 speakers in Bluetooth mode, thenlong press the Mode Buttons
on both speakers at the same time, the display will show CON indicating that
the 2 speakers are now connected wirelessly. Next time you turn on the
speakers, they will connect automatically.
2.Connect your Bluetooth-enabled device (like a smartphone) to ONE
of the speakers, not both.
3.When you play Bluetooth audio from your Bluetooth-enabled device,
this will be played in stereo on both speakers.
4.To disconnect, long press the Mode Button on one of the speakers, the
display will show DIS indicating that the two speakers are now disconnected.
Auxiliary Line-in (AUX) Operation
Connecting two speakers for stereo sound
(optional, requires two speakers)
Aiwa ABT-100A
4
an audio prompt.
USB, microSD
to your computer or a USB adaptor.
Solution: Make sure that the speaker has already been disconnected before
making a new connection to a new device.
Solution: Music format is not playable. Only mp3 formats are playable on
this speaker.
Aiwa ABT-100A
-
1
-
2
-
3
-
4
-
5
-
6
