VistaQuest DV820HD Quick start guide

Brand: VistaQuest

Model: DV820HD

Type: Quick start guide

DIGITAL VIDEO CAMCORDER

DV820HD

For customers in North and South America

For customers in USA

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference

received, including interference that may cause

undesired operation.

For customers in Canada

This Class B digital apparatus meets all the requirements of the Canadian

Interference-Causing Equipment Regulations.

For customers in Europe

“CE” mark indicates that this product complies

with the European requirements for safety,

health, environment and customer protection.

“CE” mark cameras are intended for sales in

Europe.

IMPORTANT

- Don’t open the battery door under water.

- Close the battery door properly for best water sealing.

- Rinse with clean water after use and keep it dry for storage.

After this camcorder has been used underwater, the voice recording quality will be

affected as there will still be water inside the mic and speaker compartment.

The sound will resume back to normal once water dries out.

Key features of your camcorder

Full HD digital video camcorder – 1920x1080 up to 30fps

HDTV HDMI high definition interface output

2.0” fine grade LTPS color LCD display

Slot for Micro SD Memory card, support up to 16GB SD card capacity

Driver free for Windows 7 / Vista / XP and MAC 10.4.9 or above

Functional parts

Item Part Function

USB interface For transferring images and video files to computer via USB cable.

Card slot Inserting micro SD card for digital files storage.

HDMI socket Use supplied HDMI cable for HDTV connection.

LCD screen LCD shows images, video clips, camera Settings and Menu.

Menu Button

Press to Set PICTURE / VIDEO recording options.

Mode Button Press this button to select mode: PICTURE taking or VIDEO recording.

button

Press this button to take still PICTURE;

to Start or Stop recording VIDEO clip,

To confirm changes (OK) in menu mode.

Zoom button Zoom IN or OUT during recording mode.

Volume setup

button

Setting the volume in video playback mode.

Up / Down

button

In MENU mode, push the key up/down for UP / DOWN selection

Playback button

In photo mode ,press this button to enter the Playback PICTURE mode,

In video mode ,press this button to enter the Playback VIDEO mode.

Power Button

1. Pressing and hold the power button to turn on& off the unit.

2. Pressing this button to select icons display.

Battery door 2x AA alkaline batteries provided.

Lens Optical lens for Video & Picture taking.

Speaker Speaker for video playback

Microphone For voice input.

Strap Hook For fixing hand strap.

Explanation of the status icons

Item Function Description

Recording mode

Photograph mode.

Video mode.

Selected resolution

Photo-3M, 5M, 8M

Video-Full HD ,1080P30, 720P30, WVGAP60

WVGAP30, VGA, QVGA

Self timer On / Off

Battery indicator

Battery is full

Empty battery

Zoom indicator Shows zoom range

White balance White balance selection.

SD card indication

The SD card is inserted and will be used as storage for

PHOTO and VIDEO

Counter indicator

Shows available time for recording VIDEO

Shows active recording VIDEO time

Shows picture available in PHOTO mode

Details for camera setting

PHOTO setting

In photo mode, pressing the MENU button and select PHOTO, then pressing the OK button to enter

photo setup mode.

Quality

Super Fine/ Fine(Default)

/Normal

PHOTO quality setting

3M pixel resolution

2048 x 1536 pixels

5M pixel resolution

2592 x 1944 pixels

Size

8M pixel resolution

3200 x 2400 pixels

On Self-timer selected, 10 sec delay

Self-timer

Off Turn off the self-timer, disable

VIDEO setting

In video mode, pressing the MENU button and select VIDEO, then pressing the OK button to enter

video setup mode.

Quality

Super Fine(Default)/ Fine

/ Normal

VIDEO quality setting

Full HD 1920×1080 up to 30fps

1080P30 1440x1080, up to 30fps

720P30 1280x720, up to 30fps

WVGAP60 848x480, up to 60fps

WVGAP30 848x480, up to 30fps

VGA 640x480, up to 30fps

Resolution

QVGA 320x240, up to 30fps

Setup

In photo/video mode, pressing the MENU button and select SETUP by pressing the down button,

then pressing the OK button to enter camera basic setup options.

NTSC American and Japanese TV format

TV type

PAL European TV format

Off Auto Power-Off off

1 min Auto power off in 1 min if no operation

3 min Auto power off in 3 min if no operation

Auto power off

5 min Auto power off in 5 min if no operation

Time setup

Year / Month / Day / Hour

/ Minute

Setting the time on the image or video clips.

Quick view 3s / 1s / 0.5s / Off Select picture review time after photo taking.

Volume 00 ~ 64 Setting the volume

Default Setting Yes / No Refresh the default settings

Format Yes / No Format the SD card

Language

English / Deutsch / French

/ Italian / Spanish /

Nederlands / Portuguese /

CHS / CHT / Russian

Select display language

Beep Sound Off / High / Low Setting the beep sound volume.

S.image On / Off Setting the opening screen on or off.

S.sound On / Off Setting the opening sound on or off.

File number Reset / Sequential

Slide Show

Pause

10s / 5s / 3s / Off Setting the image slide time.

50Hz / Set for European electricity frequency

Frequency

60Hz Set for American electricity frequency

FW Version See the firmware version

Effect

In photo/video mode, pressing the MENU button and select EFFECT by pressing the down button,

then pressing OK to enter effect options.

Scene

Auto/Landscape/Portrait/

Sport/Night landscape

Choose an existing Picture control

ISO Auto / 200 / 400 Sensitivity select

Metering Center / Average / Spot Metering setting

Auto Automatic white balance

Sunny White balance selected for Sunny sky

Cloudy White balance selected for cloudy sky

Fluorescent White balance selected for fluorescent indoor light

White Balance

Incandescent White balance selected for tungsten indoor lighting

Effects

Negative / Normal/ B/W /

Sepia

Effects setting

Sharpness Standard / Hard / Soft Sharpness setting

EV Setting

0, +/-0.3 , +/-0.7, +/-1.0,

+/-1.3, +/-1.7, +/-2.0

Level of exposure

Note: The camera will remain in the last setting when it is turned OFF and ON again

Using the camera

Battery installation

1. Release and open the battery door.

2. Install supplied 2x AA alkaline batteries into the battery compartment.

Align battery terminals with metal connectors inside compartment.

3. Close the battery door.

Inserting a memory card ( not included )

You must insert Micro SD Card (not supplied) to record and store your VIDEO and PICTURES.

Follow the instruction for inserting a Micro SD Memory card:

1. Turn OFF the camera.

2. Insert the Micro SD card into the Micro SD card slot, gently press it down until card is latched.

Make sure that the Micro SD card is not in LOCK position (see tiny slider on card’s side).

Note: Do not force the card into the slot; forcing may damage camera and the Micro SD memory card.

Align Micro SD card position (as marked) and try again.

Note: The Micro SD memory card must be formatted before taking photographs.

See the following instruction.

Formatting the SD memory card

If your SD card is new, or it was used with other cameras or devices, you need to FORMAT the card,

see simple steps below. If card was previously used, save all needed images & video first.

1. In photo/video mode, press the MENU button and select SETUP, then press OK to enter camera

basic setup options.

2. Select FORMAT by

pressing the UP ( ) button and press the OK button.

Select YES by

pressing the UP ( ) button.

3. Press the OK button to confirm formatting the Micro SD card.

Note: During formatting of the Micro SD card, all data, pictures & video (if present) will be erased; make

sure you save your valuable records before formatting the memory.

Remember, all your records will be erased during formatting!

Setting the resolution

VIDEO recording mode

1. Press the MENU button in video mode，Select VIDEO and press the OK button to enter options

selection.

2. Select RESOLUTION by pressing the UP (

) button, then press the OK button to enter

resolution selection.

3. Select desired resolution by

pressing the UP ( ) / DOWN( ) buttons;

Full HD (1920×1080), 1080P30(1440x1080), 720P30 (1280 x 720), WVGAP60 (848 x 480)

WVGAP30 (848 x 480), VGA (640 x 480), QVGA(320 x 240)

then press the OK button to confirm setting.

PICTURE taking mode

1. Press the MENU button in photo mode, Select PHOTO and press the OK button to enter option

selection.

2. Select the SIZE by

pressing the UP ( ) button, press the OK button to enter resolution

selection.

3. Select desired resolution by

pressing the UP ( ) / DOWN( ) buttons;

3M (2048 x 1536), 5M (2592 x 1944), 8M (3200 x 2400)

then press the OK button to confirm setting.

Taking video or pictures

1. Turn on your camera.

2. Press the MODE button to select PICTURES ( ) or VIDEO recording mode( )

3. Use the LCD screen as a viewfinder composing the scene.

4. Press the OK button for taking a PICTURE, or press this button to start / stop VIDEO recording.

Note: 1. Keep camera and the object steady when making records to avoid blurry images.

2. Max video file size is 4GB.The unit will stop recording automatically.

Zoom IN and OUT

Your camera can zoom in up to 4 X

Pressing the UP (

) / DOWN ( ) buttons for selecting desired scene / view.

Note the zoom bar in screen showing the zooming range.

Resolution Digital zoom

QVGA 30fps 4X

VGA 30fps 4X

WVGA 30fps 4X

WVGA 60fps 4X

720P 30fps 4X

1080P 30fps 2X

Full HD 30fps

Without Digital Zoom

Playback PICTURES and VIDEO clips

1. In PHOTO / VIDEO mode, Press the PLAYBACK button ( ) to enter PICTURES / VIDEO

Playback mode.

2. Pressing the UP (

) / DOWN ( ) button to select desired PICTURE / VIDEO.

3. Pressing the OK button to confirm selected VIDEO or see full size PICTURE.

4. When viewing video clips, Press the OK button to start playing the video and press again to

pause.

5. When playing the video, press the UP (

) / DOWN ( ) buttons for fast forward or rewind

the VIDEO.

Delete photographs and video clips

1. In PHOTO / VIDEO mode, Press the PLAYBACK button ( ) to enter PICTURES / VIDEO

Playback mode.

Select the photo or video to delete.

2. Press the MENU button to enter the delete mode.

3. Pressing the UP (

) / DOWN ( ) buttons for select delete current image(YES) or delete all

images and press the OK button to confirm.

4. Pressing the MODE button to exit.

Connecting the HD DV camcorder

Connect to TV

When you wish to view on High Definition (HD) TV, please use supplied HDMI cable and connect as

shown below:

Set your HDTV to corresponding HDMI INPUT (review TV Manual if needed) and use camera buttons

in the same way as you use camera during PLAYBACK mode.

Enjoy watching pictures and HD VIDEO on large HDTV screen!

Connect to Personal computer

You may also connect your HD camcorder to PC for viewing PICTURES and VIDEOS on the computer

monitor as well as expanding your system to enjoy a wide range of functions. You may edit your videos

or images and send them to friends over the Internet or even post your own VIDEOS on YouTube!

Millions of people may view them!

Upload to YouTube

Please install MEDIAIMPRESSION. This software enables upload to YouTube. This will take you

directly to YouTube website for easy upload of videos.

Installing DirectX and ArcSoft MediaImpression

1. Please insert provided CD into computer’s CD ROM and follow screen prompts to install DirectX

and MediaImpression in your computer

2. Use USB cable to connect HD camcorder to computer

3. Open My Computer> Removable Disk and select image or video file

4. Click to open and watch High definition video played back.

You may also install QuickTime (not bundled on supplied CD) or other suitable programs for best

video playback.

HD Video data is very complex; use Win XP, Vista, MAC 10.4.9 and newest computers – older and

slower computers may not play your HD Video clips so well.

Specification

Image Sensor CMOS sensor

Full HD (1920×1080) up to 30fps

1080P30 (1440x1080), up to 30fps

720P30 (1280x720), up to 30fps

WVGAP60 (848x480), up to 60fps

WVGAP30 (848x480), up to 30fps

VGA (640x480), up to 30fps

VIDEO

QVGA (320x240), up to 30fps

8.0 Mega pixel (3200x2400)

5.0 Mega pixel (2592x1944)

Resolution

PICTURES

3.0 Mega pixel (2048x1536)

Lens F/2.8 f=8.5mm

LCD display 2.0” fine grade LTPS color LCD display

White balance Auto / Sunny / Cloudy / Fluorescent / Incandescent

VIDEO format MOV

External memory card

Support up to 16GB SD memory card ( card is required to store video &

pictures, class 4 or above SD card is recommended )

File format VIDEO: MOV ; PICTURE: JPEG

Self timer 10 second options

PC interface USB 2.0 port

Power source 2x AA alkaline batteries

TV-out

High Definition VIDEO: HDMI

Standard TV (NTSC or PAL) output: HDMI

PC system min requirement

Operating System

Windows 7 / Vista / XP

Mac 10.4.9 or above

CPU

Pentium III / 1GHz (minimum)

Pentium 4 / 3.0GHz or above processor (recommended)

RAM At least 256MB (minimum) 1GB (recommended)

Interface USB available port

Display Card nVidia Geforce 7600 or ATI X 1600 or above

Troubleshooting

Problem Cause Solution

Cannot turn ON the

camcorder

1. Low battery power.

2. Battery not inserted

properly.

1. Replace with new 2x AA alkaline

batteries

2. Check that battery correctly

aligned when installed

VIDEO or PICTURES

cannot be saved when you

are taking them.

1.Micro SD card has not

been installed

2. The Micro SD card has

not been formatted

properly.

3. Memory is full. Display

shows ‘MEMORY FULL’.

1. Install Micro SD card

2. Format the Micro SD card at

SETUP mode of the camera.

Please refer to section 5.3.

3. Download the pictures and videos

from the camera to the computer

to create storage space.

Computer does not

recognize your camcorder

when connected. (You

cannot find removable disk)

Connection failure. Make sure all cable connections are

secured. Restart the computer if

necessary.

The battery life is very short. Incorrect or old, used up,

battery

Replace with new 2x AA alkaline

batteries

Blurry images 1. The HD camera is not

held steady during

recording

2. The lens of HD DV

camera is dirty.

1. Hold the HD DV camera steady

when taking pictures, wait to hear

the beep sound

2. Clean the lens with soft dry cloth.

The VistaQuest Corporation is proud that you have chosen its product and hopes you will enjoy

sharing “a clearer vision” of your memories and special moments captured with your new camera with

friends and family for many years.

IMPORTANT

- Ne pas ouvrir la porte de la batterie sous l'eau.

- Fermez le couvercle de la pile correctement pour le meilleur étanchéité à

l'eau.

- Rincer à l'eau claire après chaque utilisation et le garder au sec pour le

stockage.

Après ce caméscope utilisé sous l'eau, la qualité d'enregistrement vocal sera touché

car il a encore de l'eau dans le compartiment des micro et haut-parleur.

Le son sera repris à l'eau à la normale une fois sec.

Les principales caractéristiques de votre caméscope

Caméscope Full HD vidéo numérique - 1920x1080 à 30fps

HDTV sortie HDMI haute définition d'interface

2.0 "LTPS amende grade écran LCD couleur

Emplacement pour carte mémoire Micro SD, en charge jusqu'à 16 Go de capacité de la carte SD

Driver gratuit pour Windows 7 / Vista / XP et Mac 10.4.9 ou supérieur

Les pièces fonctionnelles

Point Partie Fonction

Interface USB

Pour transférer des images et des fichiers vidéo à l'ordinateur via un

câble USB.

Fente pour carte Insertion de la carte micro SD pour le stockage de fichiers numériques.

Prise HDMI Utilisez le câble fourni pour la connexion HDMI HDTV.

Écran LCD

Écran LCD affiche des images, clips vidéo, réglages de l'appareil et le

menu.

Menu Button

Appuyez sur pour régler PHOTO / VIDEO options d'enregistrement.

Bouton de mode

Appuyez sur ce bouton pour sélectionner le mode: Prendre une photo

ou l'enregistrement vidéo.

OUTON OK

Appuyez sur ce bouton pour prendre des images;

pour démarrer ou arrêter l'enregistrement du clip vidéo,

Pour confirmer les changements (OK) dans le mode menu.

Bouton Zoom Zoom IN ou OUT pendant l'enregistrement en mode.

Configuration

bouton Volume

Réglage du volume en mode lecture vidéo.

Up / Down

En mode menu, appuyez sur la touche haut / bas pour UP / DOWN de

sélection

Bouton de

lecture

En mode photo, appuyez sur ce bouton pour entrer dans le mode de

lecture d'image,

En mode vidéo, appuyez sur ce bouton pour entrer dans le mode de

lecture vidéo.

Le bouton

d'alimentation

1. Appuyez sur et maintenez le bouton d'alimentation pour allumer et

éteindre l'appareil.

2. En appuyant sur ce bouton pour sélectionner l'affichage des icônes.

Porte de batterie 2 piles alcalines AA fournies.

Lens Lentille optique pour la vidéo et prise de vue.

Président Président pour la lecture vidéo

Microphone Pour une entrée vocale.

Le crochet de

sangle

Pour la fixation de la dragonne.

Explication des icônes d'état

Point Fonction Description

Mode

d'enregistrement

Photographie de mode.

Mode vidéo

Certaines de

résolution

Photo-3M, 5M, 8M

Vidéo HD-Full, 1080p30, 720p30, WVGAP60

WVGAP30, VGA, QVGA

Retardateur On / Off

Indicateur de batterie

La batterie est pleine

Batterie vide

L'indicateur de zoom Indique la plage de focales

Balance des blancs Sélection de balance des blancs.

Indication de carte SD

La carte SD est insérée et sera utilisé comme stockage

pour PHOTO et VIDEO

Indicateur de la lutte

contre

Affiche le temps disponible pour l'enregistrement vidéo

Spectacles active VIDEO temps d'enregistrement

Montre l'image disponible en mode PHOTO

Détails des réglages de l'appareil

PHOTO mise en

En mode photo, appuyez sur le bouton MENU et sélectionnez PHOTO, puis en appuyant sur le

bouton OK pour entrer dans le mode de configuration photo.

Qualité

Super Fine / Fine (par défaut) /

Normal

PHOTO paramètre de qualité

3M pixels de résolution

2048 x 1536 pixels

5M pixels de résolution 2592 x 1944 pixels

Taille

8M pixels de résolution 3200 x 2400 pixels

Le Retardateur sélectionné, un délai de 10 sec

Retardateur

Off Désactiver le retardateur, désactivez

Réglage VIDEO

En mode vidéo, appuyez sur le bouton MENU et sélectionnez VIDEO, puis en appuyant sur le

bouton OK pour entrer en mode de configuration vidéo.

Qualité

Super Fine (par défaut) / Fine

/ Normal

La qualité vidéo mise en

Full HD 1920 × 1080 jusqu'à 30fps

1080P30 1440x1080, jusqu'à 30fps

720P30 1280x720, jusqu'à 30fps

WVGAP60 848x480, à 60fps

WVGAP30 848x480, jusqu'à 30fps

VGA 640x480, jusqu'à 30fps

Résolution

QVGA 320x240, jusqu'à 30fps

Le programme d'installation

En mode photo / vidéo, appuyez sur le bouton MENU et sélectionnez SETUP en appuyant sur le

bouton du bas, puis en appuyant sur le bouton OK pour entrer dans la caméra options de

configuration de base.

NTSC

FormatAmerican TV américains et japonais et

le format TV japonaise

Type de

téléviseur

PAL Format de télévision européenne

Off Extinction automatique off

1 min

Arrêt automatique en 1 min si aucune

opération

Mise hors

tension

automatique

3 min

Arrêt automatique en 3 min si aucune

opération

5 min

Arrêt automatique en 5 min si aucune

opération

Temps

d'installation

Année / Mois / Jour / Heure /

Minute

Réglage de l'heure sur les clips de l'image ou

la vidéo.

Vue rapide 3s / 1s / 0.5s / Off

Choisissez l'heure revue photo après la prise

de photo.

Volume 00 ~ 64 Régler le volume

Réglage par

défaut

Oui / Non Actualiser les paramètres par défaut

Format Oui / Non Format de la carte SD

Langue

Anglais / Deutsch / Français /

Italien / Espagnol /

Nederlands / Portugais / CHS

/ TCS / Russie

Sélectionnez la langue d'affichage

Bip sonore Off / High / Low Régler le volume de bip sonore.

S.image Le / Off

Paramétrage de l'écran d'ouverture ou

désactiver.

S.sound Le / Off Réglage du son ouverture ou désactiver.

Numéro de

dossier

Reset / séquentielle

Pause du

diaporama

10s / 5s / 3s / Off Réglage du temps de glisser l'image.

50Hz

Ensemble pour la fréquence de l'électricité

européenne

Fréquence

60Hz Set for American fréquence de l'électricité

FW Version Voir la version du firmware

Effet

En mode photo / vidéo, appuyez sur le bouton MENU et EFFET sélectionner en appuyant sur le

bouton du bas, puis en appuyant sur OK pour entrer dans les options d'effet.

Scène

Auto / Paysage / Portrait /

Sport / Paysage de nuit

Choisissez un contrôle existant Image

ISO Auto / 200 / 400 Sensibilité sélectionnez

Dosage Centre / moyen / Spot Mesure mise en

Auto Balance des blancs automatique Balance des

blancs

Sunny

La balance des blancs sélectionnée pour le ciel

nuageux

Nuageux

La balance des blancs sélectionnée pour un ciel

nuageux

Fluorescent

La balance des blancs sélectionnée pour la

lumière fluorescente à l'intérieur

À incandescence

La balance des blancs sélectionnée pour

l'éclairage intérieur de tungstène

Effets

Négative / Normal / B / W /

sépia

Effets établissement

Netteté Standard / Hard / Soft Réglage de netteté

EV Cadre

0, +/-0.3 , +/-0.7, +/-1.0,

+/-1.3, +/-1.7, +/-2.0

Niveau d'exposition

Remarque: L'appareil restera dans la dernière quand il est éteint et allumé à nouveau

Utilisation de l'appareil

L'installation des piles

1. Sortie et ouvrez le couvercle de la batterie.

2. Installez fourni avec 2 piles alcalines AA dans le compartiment à piles.

Bornes de la batterie Aligner avec des connecteurs métalliques à l'intérieur du compartiment.

3. Fermez le couvercle de la batterie.

Page is loading ...

VistaQuest DV820HD Quick start guide

Brand: VistaQuest

Model: DV820HD

Type: Quick start guide

Download PDF

report

in other languages

français: VistaQuest DV820HD Guide de démarrage rapide
español: VistaQuest DV820HD Guía de inicio rápido

VistaQuest DV820HD Quick start guide

VistaQuest DV820HD Quick start guide

in other languages

Related papers

Other documents