Binatone BB3200 User manual

Charging batteries

for the first time

:

.

Before you start to use your telephone make sure that all batteries are fully

charged for 15 hours.



Unpacking your BB3200 system

In the box, you will find:

Ƶ the base unit telephone

Ƶ a telephone line cable for the base unit

Ƶ a

mains power adapter

for the base unit

Ƶ the cordless handset (up to five, depending on

which BB3200 system you’ve bought)

Ƶ

this user guide

Ƶ up to five charger pods, each with a mains power

supply for multi handset systems

Keep the packaging materials in a safe place in case

you later need to transport the unit.

Keep your sales (till) receipt, which is your

guarantee.

User Guide for

BB3200 Digital Cordless Telephone with Caller Display



Binatone Helpline (for UK only)

Monday to Friday from 9:00am to 5:00pm

Tel: 0845 345 9677

**Please note that all calls are charged at local rate

Or visit our website:

http://www.binatoneonline.com

Important note — emergency calls

The BB3200 cordless handset is not designed for making emergency calls

when the mains power fails.

*** Before operating this set, please read these

instructions carefully.

For Emergency calls you should have a basic phone that does not need

a mains power, connected to your line so that you can make calls during

a power failure.

If you need help …..

Phone Function Keys

Recall/Delete button

Press to delete memory while

memory being checked

Press to erase a digit or letter while

editing a number or name

You may need the Recall (Flash) function if

UP/CID

Press to scroll up through the

During talk mode, press to

Press to review the Caller ID list

DOWN/ CID

Press to scroll down through the

During talk mode, press to decrease

volume

in the earpiece / loudspeaker

Press to review the Caller ID list

lists and menu options

your phone is connected to a PBX,

or if you use BT Calling Features.

•

RD

/P

RD

/P

OK

EAR

PIECE

Redial/Pause

During talk mode, press to redial

the last dialled number

Press while dialling a number

Press

to review last number redial list

HANG UP

/Power on/off /C

During talk mode, press to end

the call and go back to idle mode

Pr

ess and hold for 3 seconds to

switch handset power on/off

Ring on/ off

Press and hold to switch

the handset external call ringer on/off

Phonebook/Exit

Press to access phonebook records

Press to exit present menu

to insert a pause(3s)

•

RD

/P

LCD

Display

TALK/Handsfree

Press to make or answer phone

calls in the earpiece

During talk mode, press to turn

on/off speakerphone

STAR/Lock

Press

and hold for 1.5seconds to

switch the key lock on/off

Press when setting

up conference call

Press when

in Pulse dialling

mode

to change to Tone dialling

Press to mute the

microphone

during a call

MOUTH PIECE

Menu/OK/Mute

Press to enter menu functions from

idle

mode

& to

confirm selections

Intercom

Press to call other handsets

During talk mode, press

to

transfer

call

to

another

handset

for the rest of that call.

•

OK

lists and menu options

increase volume in the earpiece /

loudspeaker

PAGE

Press to make all registered

•

HANDSET CHARGING light

handsets ring (this is useful if you've

forgotten where you put a handset).

IN USE light

•

Turns on yellow when you have a

connection to the telephone line,

and flashes when you have new

Caller Display* records or the base

is paging or in registration mode.

•

Turns on red when the handset is put

on charge

What's on the display?

The display of your telephone contains one line of icons

and the time/date at the top, one line of text ,and one line of numbers.

Character field : shows the

Menu, names and status of a call

Number field : shows the telephone

numbers and the call timer

Icons and time/date

Display in standby mode

1. Current time and date

2. Antenna signal level

3. Battery level

4. Handset name

5. Status of phone

What the symbols mean?

Antenna-signal level

•

Shows the strength of the signal between the handset

and base unit, and flashes when you are out of range

of the base unit (the display will also flash "BASE 1")

•

If the level is low, or the symbol is flashing,

move closer to the base unit.

Battery level

Whenever this shows nearly 'empty'( ) put the

handset on the charge cradle to charge the batteries.

While the battery is being charged,the level

shown will keep changing.

Talk

•

This will display when you are on a call with

the handset

Key lock

•

Keypad locked

Alarm

•

This will display when you have set an alarm

•

This will flash when the alarm is triggered

Ring Off

•

This will display when the handset ringer

is

set OFF

Phonebook

•

This will display when you are in the phonebook

menu or are reviewing the phonebook memory

Voicemail

•

This will display when you have a new Voice Mail

message. (This is a caller id service and is

not usually available from UK network providers.)

New CID

•

This will display when there is a new CID entry or

if one is being viewed

Repeated

NEW CID

•

This will display when the same caller has

called more than once and not been read yet.

Hands free

•

This will display when the speakerphone is in

use

•

Sequence

•

Indicates

the sequence number of the CID or

Redial record being displayed.

Your Phone Function Keys

What

’

s on the

display?

What the symbols mean?

Read First before Use

Radio signals handset and base set

Interference

‘ Out of range warning’

Battery safety

• To switch on/off

•

To lock/unlock

•

To set time and date

•

To set alarm

Making and answering calls

•

Making calls

•

Making calls from redial list

•

Making calls from CID list

•

Answering calls

•

Muting the mouthpiece

Phone Book/(Memory dialing)

•

Store last number redial in phonebook

1

•

1

•

1

•

1

•

1

Using multi handset

1

•

Making intercom call

1

•

Transfer a call

1

•

Making a three way conference ca

ll

Handset Registration

•

Registering a handset to base

1. Contents

1

Review phonebook memory

Add to phonebook memory

Modify phonebook memories 11

Delete a contact in phonebook

Delete all contacts in phonebook

•

Review phonebook memory status 12

Handset tones and volume setting

16

Adjust the earpiece volume

Adjust handset ringing melodies

Adjust handset ringer volume

Set handset TONES

Handset basic settings

•

Battery installation

Fit the batteries

Charge the batteries

4

Binatone Help Line - 0845 345 9677

De-registering a handset

22

2

Troubleshooting

Cleaning and Care

Declaration of Conformity

Guarantee and Service

Technical Details

3

Select base

Customising your phone

Change the handset name

HandsetAuto answer

Select handset display language

Select handset call barring function

Reset handset to default settings

Base basic setting

23

Set dial mode (tone or pulse)

Set flash time

Modify pin code

Reset base to default settings

Choosing a site for the base unit and

charger pod

Mains power connection

If you have a Broadband line

4

12

2

3

6

7

8

9

10

11

3

6

7

9

20

21

20

21

2

3

4

5

26

28

29

30

1

•

Caller Display (CID)

1

• New CID list 1

•

Review CID list 1

•

Delete a CID 1

Delete all CID list 1

• Store a CID in phonebook 1

list

3

4

5

4

•

9

Find the Handset

s

r

uo

h

5

1

r

o

f

s

e

ir

et

tabehtegra

hC

Before you use the cordless handset(s) for the

first time, it's important to charge the batteries

fully.

You hear a 'beep' when the handset is correctly in

To keep the batteries charged, whenever you

don' t need to use the handset (such as overnight

or when you go out ), leave it on the base unit or

Leave the handset(s) on charge for

15 hours.

)s

(t

esdna

h

s

e

l

drocehtn

i

s

e

ir

et

tabehttiF

Insert the two

2

2. Battery installation

position on the base unit or charging cradle.

rechargeable

batteries as

shown

Drop in the battery

compartment cover,

then slide it forward

until it clicks firmly

into place

charger pod.

The CHARGE light

comes on

RD

/P

OK

The bars on the battery

level symbol continuously

are being cahrged

change as the batteries

3. Read First Before Use

Choosing a site for the base unit and charger pod

The base unit and charger pod(s) should be placed on a level surface, in a position where:

x

the mains adapter plug will reach an easily accessible 230-VAC switched mains

supply socket - never try to lengthen the mains power cable

x

the base unit's telephone line cable will reach your telephone line socket or

extension socket

x

it is not close to a sink, bath or shower, or anywhere else where it might get wet

x it is not close to other electrical equipment - fridges, washing machines,

microwave ovens, fluorescent lights, televisions etc.

x

if the base comes into contact with liquids, disconnect it promptly and use a soft

cloth to dry it; if you believe that the liquid has seeped into the unit, do not

reconnect the base station. Contact the Binatone helpline.

x

it is away from hot, humid conditions and strong sunlight

Mains power connection

IMPORTANT - The BB3200 base unit must be used with the mains adapter supplied

with the unit.

Using any other adapter will result in non-compliance with EN60950, and will

invalidate any approval given to this apparatus.

If you have a Broadband line

If you connect your telephone to a line with a broadband connection, you will need to

insert a micro-filter between the telephone and the telephone line; otherwise you may

get interference between the telephone and the broadband, which could cause

problems.

In a home with broadband, every telephone must have a micro-filter connected, not

just the one at the telephone point that your modem is connected to. If you need more

broadband micro-filters, contact your broadband supplier.

Binatone Help Line - 0845 345 9677

3

Radio signals between handset and base unit

To use your cordless handset and base unit together, you must be able to establish a radio

The signal range between the handset and the base station is in accordance with the

approved standard for Binatone phones:

•

Maximum range: 300 metres outdoors

•

Maximum range: 50 metres indoor

The signal range could become lower during normal use. Any large metal object, like a

refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete, between the

For the best radio signal, it is recommended that your telephone is at the highest possible

If there is no radio signal reception, Base 1 message and the

signal level

icon will flash

Interference

If the sound quality gets worse as you move around while on a call, this is probably caused by

interference between the handset and the base unit, perhaps because you are too near to

another phone or other electrical equipment.

Move to a different position to clear the interference. If you do not move, it might cause a short

break or your call may be cut off.

"Out of range" warning

If you hear a warning tone during a call, or the sound in the earpiece becomes faint or distorted,

you may be going out of range of the base unit.

Move nearer to the base unit within 20 seconds, until the earpiece sound improves. Otherwise,

your call may be cut off.

Battery safety

ONLY

use the rechargeable batteries supplied with the handset.

DO NOT use non-

rechargeable batteries

-

they may burst and cause damage to your telephone.

handset and the base unit may block the radio signal. The signal strength may also be reduced

by other solid structures, like walls, or by other radio or electrical interference.

link between them.

on the display.

position.

4

Installation and Set-up

1/ Choose a suitable site for the

base unit (see page 3)

2/ Connect the mains power lead

and the telephone line cord into the

base unit

Plug one end of the telephone line

cord into the jack on the back of the

base (the other end will plug into the

3/ Plug the mains adaptor into your

wall socket. If you have one or more

charger pods, plug the mains

adaptors accordingly

Make sure that the 230VAC, 50hz mains

socket is switched OFF when you plug

the mains adapter into the socket.

4/ Connect the base unit to the telephone line

Insert the telephone line plug into the socket then switch

See the note

on page 3

See the note

on page 3

mains power back ON.

Make sure the mains socket is switched on

—

the phone won’t work without electrical power

telephone wall socket later)

5

Binatone Help Line - 0845 345 9677

Switching handset power on and off

To switch the handset off

(in case you need save battery power):



Press the "Power on/off "

button and hold it for 3 seconds

To switch the handset back on:



Notes



to link to the base unit.

Make sure mains power to the base unit stays

switched on. The BB3200 cordless handset

needs the mains power for the base unit to be turned on to be able to make or

receive calls.

When the handset is switched off, it can’t be used for making calls including

emergency calls.

When the handset is switched off, it won’t ring for incoming calls.

To

answer a call when the handset is switched off , you need to switch it back on.

link with the base unit.

If the batteries have become completely run down (or if handset is switched off)

and you place the handset in the base unit or charge cradle it may take about 5

The handset display will go blank.

Press the

"Power on/off "

button and hold it for 3 seconds or replace the handset on

The handset display will turn back on. "BASE 1" will flash briefly,

Remember that it may take a few moments for the handset to re-establish a radio

minutes to link with the base unit. If you lift the handset during this time, it will try

!



n

2).

the base unit or charge pod.

n

Notes:

4. Handset basic settings

be a musical chime, and the handset display will go to dle mode.

while the handset

searches for the base. When the handset links with the base, there will

To lock the keypad:

Press and hold the button for

about 2 seconds.

You will hear a beep tone , the icon

will appear on the top of display,

"HS LOCKED"will

flash briefly. While the keypad is locked, if you press any buttons, the handset will give you

a double warning tone, and "HS LOCKED" will flash briefly on the display.

To unlock the keypad:

Press and hold the button for

about 2 seconds.

You will hear a beep tone , the icon

will disappear from the display and it will go back to

idle mode.

6

1).

1.

2.

3.

Press

"HS SETTINGS"

To set time and date

à

In idle mode,you can set the time and date by the following menu operation :



Press

à

"PHONEBOOK"

Press

à

"ALARM"

4.

à



Press

"DATE & TIME"

5.

Press

The format on the display for time is: HH:MM (24hr clock)

and date is: MM/DD.

1). If you subscribe to Caller Display your

automatically updated by the network when you receive an incoming call.

Notes:

OK

BB3200 time and date settings will be

3 times

7 times

The display shows the DATE & TIME screen, with the year flashing.

OK

to the previous menu.

Press , after you have finished time and date setting, the display will return

6.

Press

to go back to idle mode

*

Press the

or to set the year.

Press the to confirm.

The 'month' will be flashing



Press the or to set the month.

The 'date' will be flashing.

Press the

or

to set the date.

The 'hour' will be flashing.

Press the or to set the hour, in 24 hour clock mode.

The 'minutes' will be flashing.

Press the

or to set the minutes.

Press the

to confirm.

Press the to confirm.

OK

Press the to confirm.

OK

2).The Caller Display service only sends the month and date, not the year, so

you may still need to set the year to keep the date correct during leap years

and non-leap years.

Binatone Help Line - 0845 345 9677

7

Note: If you have set an alarm, it will ring on the time you have set

When it rings, you can switch it off by pressing any button of the handset, or you can place

the handset back down on the charge pod. If you don't switch it off the alarm tone will

continue for about 45 seconds.

If you want to disable the Alarm function, you have to re-enter the Alarm menu option and

select OFF.

To make calls

2.

4. When

you have finished the call, press

or place the handset back on the base unit or charge pod.

3. If you wish to use the speakerphone press

appear in the right top corner of the display.

in the idle mode,

If you make a mistake, press" " to clear digits one by one

To clear all digits, press .

Press

again at any time and the icon will

briefly.

, and the display shows "LINE IN USE", the number will dial out, and then the

display will show the call timer.

5. Making and answering calls

To set alarm

8. When the alarm is set, the

icon will appear on the top of display

1.

2.

3.

Press

3 times,

"HS SETTINGS"

à

"PHONEBOOK"

Press

à

"ALARM"

4.

Press

à

"OFF" (if no alarm is already set)

Press

5.

à

"ON"

6.

Press

à

"12-00" (for example) with the hours flashing.

OK

If the Snooze is set ON, this will be repeated about every 5 minutes for an hour, with the

alarm icon continuing to flash.

If the Snooze is set OFF, the alarm will sound for the 45 seconds only once.

You can set an alarm function on the handset, to give an alert at a programmed time of

every day.

The alarm gives repeated beeps for 45 seconds, or until any handset button is pressed.

.

Press or once to change the hours.

7

Press

to confirm, and the minutes will flash.

Press or to change the minutes.

OK

Press to confirm, and the display will show "SNOOZE ON".

Press

or to change between SNOOZE ON or OFF.

Press

to confirm, and the display will return to the previous menu.



OK

8

1. Key in the phone number

the display will show "MUTE" .

Muting the mouthpiece

1. Press " " to mute the mouthpiece

While the mouthpiece is muted the person on the other end of the call can not hear you and

2. Press " " again to un-mute the mouthpiece,and the handset shows "LINE IN USE"

You can store up to 150 numbers in each handset’s Phone Book (memory). Each number

can have up to 20 digits, and you can store a name of up to 12 characters with the number.

(If you try to store more, the handset will give a brief warning tone and the extra letter/

number will not be saved in memory.)

6. Phone Book/(Memory dialing)

OK

Also, you can select a different ringer melody for each entry

subscribe to CID (see page 14).

Making calls from CID list

1.

In idle mode, press or to enter the CID list, and then scroll or until you see

2. Press

, the number which you have selected automatically dials out and the 

display

shows "LINE IN USE".

Making calls from the redial list

to view the redial list

or

until you see the name and /or number of the person you want to call, then press

automatically dials out and the display shows

"LINE IN USE"

.

To answer a call

1. When the handset rings:

Press

2. When

you have finished the call, press

unit or charge pod

.

and display shows "LINE IN USE"

the name and/or number of the person you want to call.

RD

/P

briefly or place the handset back on the base

Binatone Help Line - 0845 345 9677

9

1. Press

2. Scroll

the number which you have selected

You can locate the handset by pressing <PAGE> on the base station. All the handsets

registered to the base will produce the paging tone and show

<TALK OFF> /<C> on any handset or <PAGE>

Note: If there is an incoming call during paging, the phone will ring with the

incoming call instead of paging.

"PAGING" on the display. You

Find the Handset

How to enter characters ?

To enter characters you press the button where you

see the character e.g. if you want to insert the letter

‘

A

’

you press

, if you want to insert the letter

B

twice and for

"C"

, three times etc. If you want to insert,

for the first

"A"

to stop

flashing then insert the second

for a space, or see

to delete single characters and press

to delete the

whole text.

once

"A". Press

‘

’

‘ AA ’ then you

will have to wait

can stop the paging by pressing <TALKON>/

on the base again.

but this will only work if you

the key pad table overleaf for other characters. Press

and hold

(2). The Phonebook menu:

Press

à

"PHONEBOOK"

Press

à

"LIST"

display the first entry in the phonebook memory, and then search as above.

Phonebook submenu structure:

The cordless handset has a phonebook submenu, to help you to use the phonebook memory

easily.

"LIST"----shows all of phonebook memories one by one

"NEW ENTRY"---add a new phonebook entry

"EDIT RECORD"--- modify an existing phonebook memory

"DEL RECORD"--- delete a phonebook memory

"DELETE ALL"--- delete all phonebook memories

"MEM STATUS"---shows the number of entries programmed in the phonebook

Press

to go back to idle mode at any time.

*

OK

Key pad table

1st 2nd 3rd 4th 5th 6th

_ , ?

!

’

”

( ) : ; .

A B C 2

D E F 3

G H I 4

J K L 5

M N O 6

P Q R S 7

T U V 8

W X Y Z 9

space 0 + - @ = / \ [ ]

*

#

? !

1

7th 8th 9th 10th 11th 12th 13th 14th

á

~

ú

í

~

N

To review phonebook memory(name and number):

(1). The shortcut key

In the idle mode, press

and the handset display will show the first entry in the

phonebook memory

There are two ways to review the phonebook memory,Note:

Press or to scroll through the phonebook memory one by one, or

press digit

buttons to jump straight to the first entry beginning with the corresponding letters, and

then scroll up or down.

Press

OK

10

To modify phonebook memories

"PHONEBOOK"

à

"LIST"

"EDIT RECORD"

3. Press

twice ,

à

to display the first entry in the phonebook.

5. Press

or

to scroll to the entry you want to modify.

and the cursor will flash at the end of the current name.

to delete letters one by one, and then add characters to enter the new name.

OK

to confirm the name, and the cursor will flash at the end of the current

to confirm the number, and the display will show "MELODY 1"

or to scroll through the ring melodies.

to confirm the melody, and the modified entry is saved in the phonebook.

Press

to go back to idle mode at any time.

*

number.

Press to delete numbers one by one, and then add any new numbers.

"NEW ENTRY"

à

"PHONEBOOK"

à

"LIST"

3. Press

once

à

and the display shows a flashing cursor at the start of the name line.

OK

To Add a phonebook memory:

If you enter any wrong character, press

to delete one letter

to confirm, and the cursor will jump to

to confirm and the display shows

"MELODY 1",

with the melody playing.

the start of the number line. Key in the telephone number (maximum 20 digits).

to confirm the melody, and the new entry is saved in the phonebook.

Press

to go back to idle mode at any time.

*

(Note: the melody you select will only play if you subscribe to CID (see page 14) and

the phonebook number matches the one received from the Caller Display.)

The display will return to the previous menu.

OK

Binatone Help Line - 0845 345 9677

11

1. Press

2. Press

4. Press

5. Key in the name (maximum 12 characters).

6. When you have entered the name , press

7. When you have entered the number, press

8. Press or to scroll through the ring melodies.

9. Press

1. Press

2. Press

4. Press

6. Press

7. Press

8. Press

9. Press

10. Press

11. Press

This allows you to check how many entries you have in the phonebook.

The phone book allows up to 150 names and numbers.

1.

4.

Press

the phonebook memory status will be shown

à

2.

3.

Press

à

"LIST"

"MEM STATUS"

5 times

à

Press

à

e.g "05"/"150" :

"05" means the handset has 5 entries saved in the phonebook, /"150"

means the handset can have a maximum of 150 entries in total.

Press

to go back to idle mode at any time.

*

OK

Press

1.

2.

Press

"DEL RECORD"

à

"PHONEBOOK"

à

"LIST"

3. Press

3 times,

à

4.

to display the first entry in the phonebook.

6.

Press

à

"CONFIRM ?"

7.

Press

to confirm the delete.

The display will show "DEL RECORD".

5.

Press

or

to scroll to the entry you want to delete.

Press

to go back to idle mode at any time.

*

OK

To delete a contact in your phonebook

To delete all contacts in your phonebook

1.

2.

3.

Press

"PHONEBOOK"

Press

"CONFIRM?"

à

"LIST"

"DELETE ALL"

4 times,

à

Press

à

4. Press

OK

Press

5.

The handset will give a confirmation beep, and the display will return to "DELETE ALL".

Press

to go back to idle mode at any time.

*

to confirm the delete.

OK

Reviewing phonebook memory status(total quantity)

OK

12

"PHONEBOOK"

7. Caller Display(CID)

To subscribe to this feature you need to contact your service provider, and there may be a

charge for this service.

•

the caller's number (up to 20 digits)

•

the date and time of the call

•

the caller's name (up to 12 characters) if the incoming number matches an entry

Note: it will also display the caller's name if the network sends it, but this is not normally

available in the UK.

The display may also show the following:

UNAVAILABLE - if the number of the caller is unavailable, e.g. from an international call. (This

may also appear with a number, as certain networks can send a "name unavailable" message

WITHHELD - if the call is from someone who has withheld their number, e.g. by dialling 141.

with the caller's number.)

Caller Display lets you see the phone numbers of your callers on the display before you answer.

Both answered and unanswered calls are stored, up to a maximum of 29 calls. When the caller

display list is full, any new caller display entry will replace the oldest record.

The caller display information includes:

in the phonebook

(1) If you have new calls in the calls list, the display will show the NEW icon and a number in

the top right corner to indicate how many new calls there are.

(2) If you receive the same new caller id more than once, the display will show

the RPT and

NEW icons while the handset is ringing, but after the ringing stops the total new CID

number will not increase.

Also, the RPT and NEW icons will be shown when the call is first viewed in the calls list.

To store a last number redial in your phonebook

1. Press in the idle mode, and the display will show the first entry in the dialled call list.

Scroll

or

2.

to select the dialled call number you want to save.

Press

"ADD TO PB"

à

3.

Press

4.

and the display shows a flashing cursor at the start of the name line.

Press to confirm the name, and the cursor will jump to the end of

the current number to allow you to modify the number, if necessary.

5.

6.

Press

à

to confirm the number, and the display will show "MELODY 1".

7. Press

to confirm the melody and store the redial number in your phonebook.

Press

to go back to idle mode at any time.

*

RD

/P

OK

Press or to go through the ring melodies.

OK

Key in the name.

OK

New CID list : CALLER ID information on display

Each handset will store its own CID list independently.

1

Binatone Help Line - 0845 345 9677

3

1.

Using the short-cut keys:

In idle mode

press

or

(

and )

, and the display will show details of the most recent call received.

If the viewed call is a new call, the display will show

"NEW"

on the top right corner along

2. Using the Call Log menu:

Press

In idle mode

à

"PHONEBOOK"

Press

à

"CALL LOG"

Press

"RECEIVED"

à

If you wish to call directly from the CID list, simply press while the number you want to

To delete a Caller ID

*

Press

to go back to idle mode at any time.

*

OK

call is shown on the display.

Press the

and the display will show details of the most recent

Press or to scroll through the rest of the CID list.

call received (as above).

OK

with #

and a number to indicate the position of the entry in the calls list. The time and date

Press or to scroll through the rest of the CID list.

To review the CID list

While the entry you want to delete is shown on the display, simply press the

The entry will be deleted immediately and the display will show the next entry in the calls list.

To delete all caller id records from the list:

*

Press

or

until you see "DELETE ALL ?"

While you are reviewing the calls list, press the

to display "ADD TO PB".

All entries will be deleted and the display will show "EMPTY", before returning to idle.

Press to show "CONFIRM ?". Press to confirm.

OK

14

of the call will also be shown on the top line.

While the entry you want to store is shown on the display:

1). Press

"ADD TO PB"

à

2). Press

à

and the display shows a flashing cursor at the start of the name line.

Key in the name.

Press to confirm the name, and the cursor will jump to the end of the current

number to allow you to modify the number, if necessary.

3). Press

à

to confirm the number, and the display will show "MELODY 1".

4). Press

to confirm the melody and store the CID number in your phonebook.

Press

to go back to idle mode at any time.

*

Press

or

to go through the ring melodies.

à

To store a Caller ID record in phonebook

OK

Binatone Help Line - 0845 345 9677

15

Page is loading ...

Binatone BB3200 User manual

Binatone BB3200 User manual

in other languages

Related papers

Other documents