6
Gettingstarted
(U)SIMCardandBattery
When you subscribe to wireless services you will receive a (U)SIM Card
(subscriber identity module), which contains information about your
networkservicesandyourmobilenumber.
Please consult with your SIM card provider, network service provider or
networkoperatortoobtainanduseSIM‐basedinformation.
Insert(U)SIMCardandBattery
Poweroffthephoneandensuretheadapterisdisconnectedfromthe
phonebeforeremovingthebattery.
1. Withthephonebackfacingupward,slightlypressandpushthe
rearcovertowardthephonebottomuntilthecoverisremoved.
2. Removethebattery.
3. InserttheSIMcardintomarkedSIMslotwiththegoldenchip
facingdown.
4. Installthebattery,ensuringcontactsarealigned.
5. Pushthebackcoverbacktotheoriginalplace.
RechargingtheBattery
When the battery power is low, the phone will display a low power
notificationwith a flickeringbatteryiconwith zero bars. When thebattery
is low, some functions of the phone might not operate until the battery
receivesafullcharge.
When the power is lower than the threshold value, the phone will
automatically power off until it is recharged. When the phone is
powered‐onandbeingcharged,thebattery icononthetop‐rightcornerof
the display will flicker to show it is being recharged. When the battery is
fully charged, the prompt of “charge completed” is displayed on the
top‐right corner of the screen. When the phone is powered‐off and being
charged, the charging statusis displayed onthe screen; after charging has
finished, the prompt of “charge completed” is displayed on the screen. It
takes approximately 2.5 hours to fully charge the battery. Be sure to fully