Cuisinart DCC3000P1, DCC-3000P1 Reference guide

  • Hello! I am an AI chatbot trained to assist you with the Cuisinart DCC3000P1 Reference guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Turn Function Dial to PROG; the AUTO ON LED
will flash. Follow “Set Time” instructions to
program brew-start time. Turn Function Dial to
AUTO ON and press the On/Off button. The
green AUTO ON light signals advanced brew-start
function is on.
2.
At the programmed time, the blue On/Off
indicator light will come on, to indicate
brew cycle is starting.
1.
3.
To start the brew cycle at the same time the
next day, turn Function Dial to AUTO ON and
press the release On/Off button once more.
The green Auto On light will turn on.
Turn Function Dial to Auto Off. Follow “Set Time”
instructions in the Instruction Booklet to program
coffeemaker to shut off 0 to 4 hours after brew cycle
is finished.
Turn Function Dial to Clock. Press and hold Hour or
Minute button until clock begins flashing. Hold down
or press and release button until desired time is
displayed. Numbers will stop flashing.
to set the time
to program the auto on
to program the auto off
QUICK REFERENCE GUIDE
Coffee on Demand
12-Cup
Programmable Coffee Maker
Please see reverse side for Setup and Use
Remove and fill water reservoir for
number of cups you’re brewing. Replace
reservoir, pushing down firmly in place.
2.
Plug in unit, turn Function Dial to Brew,
press the On/Off Button and the blue
indicator will light up. To delay brew start,
turn dial to Auto On. Green Auto On will
light up.
Insert the permanent gold tone or paper
filter into the filter basket holder. Using the
scoop provided, add 1 scoop of ground
coffee per cup - you can adjust the amount
to taste. Make sure the filter basket is securely in place
and lid is completely closed.
When brew cycle is complete, five beeps
sound and On/Off indicator light will turn
off. Place mug or cup on drip tray and press
lever to pour coffee. The cup area lights up
when the lever is pressed to pour coffee.
Fully immerse the charcoal water filter
in cold tap water and soak for 15 minutes
(see complete instructions on pages 6-7 of
your Instruction Booklet). Insert the filter into
the water filter holder. Open the lid to the water
reservoir and place inside.
1.
3.
5.
4.
setup and use
IMPORTANT!
Do not throw away. Read before
operating your new coffeemaker.
Keep for quick reference.
This guide is a supplement to the instruction
booklet. To ensure proper operation and
optimum performance, please read the entire
Instruction Booklet.
PG-26977A
/