Features
•
Vitreous china
•
Elongated bowl
•
Comfort Height
®
•
AquaPiston
®
flushing system
•
Less seat and supply
•
12″ (305 mm) rough-in
•
1.28 gpf (4.8 lpf)
•
2-1/8″ (54 mm) glazed trapway
•
11-1/2″ (292 mm) x 8-3/4″ (222 mm) water area
•
29-1/4″ (743 mm) x 17-1/4″ (438 mm) x 30-3/4″
(781 mm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ADA
•
ICC/ANSI A117.1
•
CSA B651
•
OBC
•
ASME A112.19.2/CSA B45.1
•
EPA WaterSense
®
COMFORT HEIGHT
®
TOILET
K-3837
OBC
ADA CSA B651
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Trip Lever Colors/Finishes
K-3837 Comfort Height toilet (shown) left-hand ❑ 0 ❑ Other_____
K-3837-RA Comfort Height toilet right-hand ❑ 0 ❑ Other_____
Recommended Accessories
K-4650 Lustra
TM open-front seat with cover– for Accessibility
compliance
❑ 0 ❑ Other_____
K-7637 Angle supply with stop – 3/8″ NPT ❑ CP ❑ PB ❑ Other_____
Optional Accessories
K-9167-L Trip lever (non-CP finish) – left-hand ❑ PB ❑ Other_____
K-9167-R Trip lever (non-CP finish) – right-hand ❑ PB ❑ Other_____
Product Specification
The elongated bowl toilet shall be made of vitreous china. Toilet shall be 29-1/4″ (743 mm) in length, 17-1/4″ (438 mm) in width,
and 30-3/4″ (781 mm) in height with an 11-1/2″ (292 mm) by 8-3/4″ (222 mm) water area. Toilet shall be Comfort Height. Toilet
shall be 1.28 gpf (4.8 lpf) with AquaPiston flushing system. Toilet shall be 12″ (305 mm) rough-in with 2-1/8” (54 mm) glazed
trapway. Toilet shall be less seat and supply. Toilet shall be Kohler Model K-3837-_______ or K-3837-RA-_____.
DEVONSHIRE
®
Page 1 of 2
1155371-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Technical Information
Fixture:
Configuration two-piece, elongated
Water per flush 1.28 gpf (4.8 lpf)
Passageway 2-1/8″ (54 mm)
Water area 11-1/2″ (292 mm) x
8-3/4″ (222 mm)
Water depth from rim 5-1/2″ (140 mm)
Seat post hole centers 5-1/2″ (140 mm)
Included components:
Elongated bowl K-4397
Tank K-4438
Tank cover 1044820
Trip lever, left-hand OR 1126917
Trip lever, right-hand 1160317
Bolt cap accessory pack 1013092
Installation Notes
Install this product according to the installation guide.
For back-to-back toilet installations: Use only a 45° double
wye fitting.
Will comply with the Americans with Disabilities Act (ADA)
when installed per the requirements of the 2010 ADA
Standards for Accessible Design, Section 604 Water Closets,
of the Act. The Model Plumbing Codes require the installation
of elongated open-front toilet seats in public bathrooms.
Will comply with CSA B651 when installed per Clause 4.3.6
of the standard.
Will comply with OBC when installed per Clause 3.8.3.8 and
3.8.3.9.
7-13/16"
(198 mm)
3"
(76 mm)
1-1/4"
(32 mm)
16-1/2"
(419 mm)
30-3/4"
(781 mm)
17-1/4" (438 mm)
17-1/4"
(438 mm)
10"
(254 mm)
9-3/8"
(238 mm)
6"
(152 mm)
3/8" NPT Supply
12" (305 mm)
29-1/4"
(743 mm)
Front of Bowl
Do not use a
double sanitary tee.
Use a 45˚ double
wye fitting.
For Back-to-Back Toilet Installations
L of Outlet
C
5"
(127 mm)
Product Diagram
DEVONSHIRE
®
DEVONSHIRE
®
COMFORT HEIGHT
®
TOILET
Page2of2
1155371-4-
E
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kohler 4397-0 Dimensions Guide
-
-
-
-
-
-
Kohler Santa Rosa K-30810-RA User manual
-
-
-
Kohler K-31648-9-0 Specification