Mach Shine 820 User manual

Series

Column Speaker System

User manual

Shine 420

Shine 820

Shine 1220

Mach Shine Series User Manual - 2 -

Content

1. Introduction -------------------------------------------------------------------------- P.3

2. General Instructions --------------------------------------------------------------- P.3

3. Cables --------------------------------------------------------------------------------- P.3

4. Safety Information ------------------------------------------------------------------ P.4

5. Technical Specifications ------------------------------------------------------- P.5-6

6. Accessories for Installation ------------------------------------------------------ P.7

7. Order Information ------------------------------------------------------------------ P.7

- 3 - Mach Shine Series User Manual

1. Introduction

The Shine Series slim column loudspeaker is developed for application even in acoustically critical room.

It features high-quality linguistic and high fidelity music reproduction as well as high sound pressure level.

Shine Series is ideal solution for house of workshop, temple, lecture hall, conference room and exhibition

hall.

Full-frequency is using the compact structure column speaker, through the auxiliary acoustic phase

design, it phase to minimize interference between each units. All units have excellent performance

consistency and stability. They all independently developed and manufactured entirely by Mach.

Sub-woofer system also uses its own special high output, long stoke woofer driver, bass cabinet is not

only compact, but also can be hung installation. It comes with a separate amplifier system, and you can

adjust the crossover frequency and phase, make it more simple and convenient to connect whit

full-frequency column speaker.

2. General Instructions

1. Do not use the speakers near water.

2. Always keep the speaker clean and dry, clean only with dry cloth.

3. Never overload your system – stay within the specified limits for power handling.

4. Do not block any ventilation slots. Install in accordance with the instructions.

5. As with any electrical product, currents will accelerate corrosion of metal surfaces. Therefore it is

recommended to check the terminals for corrosion at regular intervals, especially if the speaker is

mounted in a hostile environment.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

7. Do not defeat the safety purpose of the polarized or grounding-type plug.

8. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

9. Only use attachments/accessories specified by the manufacturer.

10. Unplug this device during lightning storms or when unused for a long period.

11. Refer all servicing to qualified service personnel. Servicing is required when the speaker has been

damaged in any way.

3. Cables

To get the best possible performance from your Shine Series speaker, use high quality cable. Cables with

high capacitance, high inductance and high impedance have a strong negative influence on sound quality

as well as amplifier reliability.

Mach Shine Series User Manual - 4 -

4. Safely Information

It is important that loudspeaker systems are used in a safe manner. Please take some time to review the

following points concerning safe use of the Mach loudspeakers. Professional loudspeakers are capable

of producing extremely high sound levels and should be used with care. Hearing loss is cumulative and

can result from levels above 90dB if people are exposed for a long period. Never stand close to

loudspeakers driven at high level. Please follow the rules as below:

1. Inspect all the components before assembly. Those affected should NOT be used.

2. Carefully read the assembly instructions shipped with each accessory.

3. Deploy the system accessories, please wear protective wears.

4. Do not allow inexperienced persons to handle the systems. Installation personnel should be trained in

loudspeaker techniques.

5. Ensure that public and personnel are not allowed to pass beneath the system during the installation

process. The work area should be isolated from public access.

6. Stacking: Ensure that the floor or stage is level and solid. Be aware that speakers producing very high

power levels can move or creep. To avoid this, place friction material between the floor and speaker

and between each speaker.

7. WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture.

8. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart / apparatus combination to avoid injury from

tip-over.

9. Do not expose to dipping or splashing. Do not place objects filled with

liquid, such as vases on this apparatus.

10. To prevent electric shock, do not remove top or bottom covers. No user

serviceable parts inside refer servicing to qualified service personnel.

- 5 - Mach Shine Series User Manual

5. Technical Specifications

Shine 420

Category

Active Sub-woofer system

Drivers

12” woofer driver

Power rating AES

350 W

Nominal Impedance

8 Ω

Sensitivity 1w/1m

99 dB

Max. SPL peak

131 dB

Frequency response

40 Hz ~ 250 hz

Amplifier

400 W x 2 Channels

THD

<0.05%

AC power rating

100V–240V 50/60Hz 10Amps

Finish

Black Safe Coat coating

Dimensions (H x W x D)

550 x 363 x 505 mm

Net weight

30.1 Kg

Input connector

(Male/Female) 3 Pin XLR

2 x Speakon Pin 1+, 1-

①

③

②

⑤

⑥

⑦

⑧

④

⑨

⑩

Shine 1220 Back panel :

① Audio input / Link – connecting a balanced XLR cable.

② Top Box Volume

③ Power LED – Indicates power status. Red : Power on

Signal / Clip – Displays the input indicator

‧ Green : Input signal present

‧ Yellow : Input signal clipping

④ Phase reverse : 0°-180°

⑤ Sub-woofer level and frequency tuning

⑥ Main power on/off

⑦ AC Power in

⑧ AC Power out – link to another Shine 1220

⑨ Speaker output to top box – connecting a speaker cable.

⑩ Exhaust fans

- 7 - Mach Shine Series User Manual

6. Accessories for installation

CB-01

Auxiliary mounting bracket for two vertical Shine 820 speakers

SS-02

Speaker Pole bracket for Shine 420 & Shine 820

SS-01

Direct insert at top of Shine 1220 for support Shine top boxes

SS-03

Direct insert at top of Shine 1220 for support Shine top boxes

SS-04

Direct insert at top of Shine 1220 for support Shine top boxes

WM-01

Wall mount for Shine 420 and Shine 820

7. Order Information

Shine 420 full range column speaker # P/N 95301010

Shine 820 full range column speaker # P/N 95301030

Shine 1220 active sub-woofer system # P/N 95301050

CB-01 mounting bracket # P/N 98005050

SS-02 speaker pole bracket # P/N 98005040

SS-01 long speaker pole # P/N 98005030

SS-03 short speaker pole (deluxe) # P/N 98005070

SS-04 short speaker pole # P/N 98005080

WM-01 wall mount bracket # P/N 98005010

Mach Shine Series User Manual - 8 -

Mach Audio Ltd does not accept any liability for loss or damage caused or alleged to be caused directly or

indirectly by these instructions. The contents of the instructions may be subject to change without notice.

Mach Audio Ltd makes no warranty of any kind with regard to these instructions.

No part of these instructions may be reproduced, in any form or by any means, without permission in writing

from Mach Audio Ltd.

Mach Shine 820 User manual

This manual is also suitable for

Mach Shine 820 User manual

Related papers

Other documents