LED Moving Head Light User Manual LED Moving Head Light User Manual
150~154 White+ Green from dark to light
155~166 White+ Blue from dark to light
167~178 Red+ Blue from dark to light
179~190 Green+ Red from dark to light
191~202 Green+ Blue from dark to light
203~214 Blue+ Green from dark to light
215~226 Blue+ Red from dark to light
227~238 Red+ blue from light to dark
239~250 Blue+ (Red from dark to light, blue
from light to dark, the Red and Green change at the
same time
251~255 Red+ Blue+ Green+ White 100%light
at the same time
CH8 Speed 1~255 linear, from fast to slow
CH9 Pan
0~540°scan, 1~255 linear control
Thank you for having chosen our company’s products. For your own safety,
please read this user manual carefully before installing the device.
Ⅰ. PRODUCT INTRODUCTION
This product is designed for indoor use. It is suitable for indoor building, disco,
stage and etc. as large or small wash or effect lighting. This product can be
operated as a single unit or in multiple units for large applications. Direct input of
DMX512 signal to unit to allow it be controlled by any DMX512 controller.
Powerful internal programs and friendly & convenient operation interface allow
customers to program freely to any different lighting project requirements for
installation or shows.
IMPORTANT
BEFORE OPERATION PLEASE CONFIRM THAT THE POWER
SUPPLY STATED ON THE REAR PANEL OF THIS UNIT IS THE
SAME AS THE SUPPLIED MAINS POWER IN YOUR AREA.
Check upon receipt
On receiving products, please carefully check that there has been no damage
caused in transportation and that the following parts are enclosed:
1 x LED Moving Head Light
1 x User manual
Additional spare parts may be supplied upon customer order.
Read this user manual carefully before operation.
-8-