SY·PA300
AIR PURIFER
USER
MANUAL
1
Contents
1. Important safety instructions .......................................................... 2
2. Product overview ........................................................................... 5
3. Before first use .............................................................................. 6
4. Using the appliance ....................................................................... 8
5. Filter Replacement ...................................................................... 10
6. Storage ........................................................................................ 13
7. Environment ................................................................................ 13
8. Troubleshooting ........................................................................... 13
9. Specifications ............................................................................... 15
2
1. Important safety instructions
When using electrical appliances, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock or other injuries or damages. Please
read all instructions before use.
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
1. Check that the voltage indicated on the appliance
corresponds to the local power before you connect
the appliance.
2. This appliance can be used by children aged 8 years
and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge, if they have been given supervision
or instruction concerning the use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
unless they are older than 8 and supervised.
3.
Keep the appliance and its cord out of reach of children
less than 8 years.
4.
DO NOT block the air inlet and outlet.
5. DO NOT place the appliance directly below an air
conditioner to prevent condensation from dripping onto
the appliance.
6. DO NOT use this appliance when you have used indoor
smoke-type insect repellents or in places with oily
residues, burning incense, or chemical fumes.
3
7. If the filter is protected by a polybag when shipped,
remove it before use.
8. To avoid fire hazards, NEVER let the cord hang
over and edge of a table, counter, or touch hot
surfaces such as heaters, stoves or radiators.
9. To protect against electrical hazards, DO NOT
immerse the appliance in water or other liquids.
DO NOT use the appliance in wet surroundings or
in surroundings with high ambient temperatures,
such as the bathroom, toilet or kitchen, or in a
room with major temperature changes.
10. Close supervision is necessary when any appliance
is used by or near children, or disabled persons.
11. Always unplug the air purifier before moving or
cleaning the unit, opening the grill, changing the filter
and whenever the unit is not in use. To disconnect
the unit, make sure to pull from the plug and not the
cord.
12. NEVER drop or insert any objects into the openings of
the unit.
13. DO NOT operate any appliance with a damaged cord
or plug. If the motor fan fails to operate or the unit has
been dropped or damaged in any manner. Contact
Sytech technical service department for examination
and/or repair.
14. Use the appliance only for intended household use as
described in this manual. Any other use not
recommended by the manufacturer may cause fire,
electric shock, or injury to persons. The use of
attachments not recommended or sold by manufacturer
4
may cause hazards.
15. DO NOT use this product outdoors. THIS
APPLIANCE IS FOR HOUSEHOLD ONLY.
16. NEVER place the air purifier on a soft surface such as
a bed or sofa as this could cause the unit to tip over
and block the air inlet or outlet grills.
17. Keep the unit away from heated surfaces and open
flames.
18. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so will void
your warranty. The inside of the unit contains no user
serviceable parts. All servicing should be performed
by an authorised dealer.
19. DO NOT place any object on top of unit.
20. NEVER use detergents, gasoline, glass purifier,
furniture polish, paint thinner, or other household
solvents to clean any part of the appliance.
21. Always turn the appliance off before unplugging it.
22.This appliance should only be used in rooms with
temperatures between 5ºC and 45ºC
.
23. WARNING: To reduce the risk of fire or electric
shock, DO NOT use the appliance with external
power strips or external speed control device.
24. Only use the original Artico filter especially intended for
this appliance. Do not use any other filters.
Save these instructions for future use.
5
WELCOME
Congratulations on your purchase of the Artico Air purifier SY-PA300. In order
to fully benefit from this product, please follow the instructions in this user
manual very carefully. Store this user manual in a safe place for future
reference.
2. Product overview
1
5
1. Control panel
2. Light ring
3. Outlet cover
4. Upper body
6
5. Lower body
6. Filter
7. Base cover
7
2
3
4
6
3. Before first use
The filter is protected by a polybag when shipped, remove it before
use.
Placing the filters
The Air purifier comes with the filter fitted inside. Simply unlock the base cover
and remove the filter which is packed in its polybag. Unpack the filter and place it
back into its place as described below:
1. Place the appliance upside down on a soft cloth to avoid scratching, to
open the base cover, you need to find an arrow point on the base cover
corresponding the LOCK position, rotate the base cover counterclockwise
from LOCK to OPEN position to release the lock.
2. Remove the base cover and take out the filter.
3.
Remove the packaging material from the filter.
Note: Make sure you insert the filter in the correct position.
7
4. Insert the filter back into the appliance.
5. Rotate the base cover clockwise from OPEN position to LOCK position,
you will hear a "click" sound, the base cover is now locked.
8
4. Using the appliance
4.1. About the control panel
• For optimum purification performance, close doors and windows.
1. Connect the plug in the wall socket
All lights will turn on once and a beep sound
will be heard. The lights will go off again.
2. Press the power button to switch on the appliance.
The power and the fan speed 2 lights (Medium level)
will turn on.
3. Fan speed adjustment
The fan speed light indicates at which fan speed the appliance is operating. Press
Speed button to adjust the fan speed level. There are three levels 1~3 which
refers to: (1. Low, 2. Medium, 3. High).
4. Sleep mode
Press the button to activate the sleep mode.
When you use the air purifier in sleep mode, it will operate very quietly.
Press any of the buttons to switch off the sleep mode except the Filter and Timer
buttons.
Filter
Light
Sleep
mode
Timer
On/Off
Speed
9
5. Ambient Light
When you turn on the air purifier, the panel will light up and then cycle to
random colours automatically. The panel includes 7 lighting modes.
1. Press the light button to select the random lighting mode.
2. Press a second time to select a specific light colour.
3. Press a third time to off the light
In standby mode (night light mode)
1. In standby mode, press the light button to activate the amber light
mode.
2. Press the light button once more to decrease the light effect to half its
brightness.
3. Press the light button for the third time to off the light completely.
6 Setting timer
1. Press timer button to turn on or off the timer options.
2. You can select 3 timer options: 2, 4 or 8 hours.
3. The air purifier will automatically power off once the time has elapsed.
Note: to cancel the timer at any time, simply unplug the cable or press the
timer button .
7. Filter replacement light
When the filter indicator lights up, this means the filter needs to be checked.
The first option is to clean the filter. Take out the filter and clean it (do not wash).
Place the filter back in its compartment and check if the filter light is no longer on.
If not, you must replace the filter.
Note: The filters’ lifetime is based on the environment air quality and usage
time. Using the appliance in a humid environment will reduce the lifetime of the
HEPA13 filter.
For optimal purification performance, close the doors and windows.
4.2. Cleaning the air purifier
Regularly clean the inside and outside of the unit to prevent dust from
collecting.
1. Wipe away the dust with a soft dry cloth from the body of the
appliance.
2. Clean the air inlet and the air outlet with a soft dry cloth.
3. Remove dust and hair trapped inside the purifier with a vacuum cleaner.
10
5. Filter Replacement
When Should I Replace the Air Filter?
It is recommended to change the air filter every 6 to 8 months. However, you
may need to change your filter sooner or later depending on how often you use
your air purifier. It is important to watch out for the following signs of expired filter:
● Increased operating noise
● Decreased airflow
● Clogged filter
● Increased presence of odors
Note:
• The environment in which the air purifier is being used may also extend or
shorten the lifetime of the air filter. Using your air purifier in an environment
of relatively high pollution may mean you will need to change the air filter
more often.
• If the air pollution in your environment is very high, there is a possibility that
the filters may not be completely effective and may need to be replaced
before the indicator lights up
• Remember to reset the air purifier after changing the air filter.
1. Switch off the appliance and unplug it. (a)
(a)
• Always unplug the appliance before cleaning it.
• Never immerse the appliance in water or any other liquid.
• Never use aggressive or flammable cleaning agents such as bleach
or alcohol.
• The HEPA13 filter is not washable.
11
2. Place the appliance upside down on a
soft cloth to avoid scratching. Rotate
the cover base counter clockwise from
the LOCK position to the OPEN position
(b).
(b)
3. Remove the old filter. (c)
(c)
4. Remove the packaging material of the new filter. (d)
(d)
5. Insert the new filter back into its compartment. (e)
(e)
12
6. Rotate the base cover clockwise from OPEN position to LOCK position, you will
hear a "click" sound, the
base cover is blocked. (f)
(f)
7. Connect the plug in the wall socket and switch
on the appliance again. (g)
(g)
8. Reset filters lifetime.
If after replacing the new filter, the indicator lights up, you
should reset the filter life.
1). Plug in the air purifier and turn it on.
2). Press and hold the button for 3 seconds. (h)
3). Release the button after 3 seconds and the light
will turn off. (h)
4). The reset is now complete.
Filter replacement force mode
When using the air purifier in an environment of heavy pollution, the lifespan of the
air filter may significantly reduce. You can change the filters even if does not
light up. Follow the steps below to perform a hard reset
.
1). Replace the air filters as mentioned in the Filter Replacement section (5).
2). Plug in the air purifier and let it be in standby mode.
3). Press and hold the button for 3 seconds. The indicator will light up.
4). Press and hold the button for 3 seconds again and the indicator will turn off.
The reset is now complete.
13
6. Storage
1. Turn off and unplug the air purifier from the electrical outlet.
2. Clean the air purifier and the filter surface (see the chapter on “Cleaning and
maintenance.)
3. Allow all parts to dry thoroughly before storing.
4. Put the filter in an airtight plastic bag.
5. Store the air purifier and filter in a cool, dry place
6. Always wash your hands thoroughly after handling the filters.
7. Environment
This symbol means that this product shall not be disposed with
normal household waste (2012/19/EU).
Follow your country’s rule for the separate collection of electrical
and electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
8. Troubleshooting
This chapter summaries the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information below,
contact Artico technical service center for a proper solution.
14
Problem
Possible
cause
Possible
solution
The appliance
doesn’t
work
The filter cover is not closed properly Remove the filter cover and
reinstall it.
Power plug is not connected to a
power supply.
Unplug and reconnect power.
The appliance is not turned on. Plug in the power and turn the air
purifier back on.
The airflow has
significantly
reduced
Filters packaging has not been
removed.
Filter’s plastic packaging
should be removed before
use.
The air quality is good and
therefore the automatic mode
has been activated.
In automatic mode, the
appliance will automatically
adjust the fan speed to save
maximum energy.
Sleep mode has started automatically,
the LED indicator turns off, while the
fan speed and noise level are also
reduced.
Press the fan speed button and
choose the desired fan speed.
The Pre-filter is too dirty. Please clean up the Pre-filter.
The filter has not been replaced.
Replace with a new filter.
Insufficient space and ventilation in
the surroundings.
Make sure there is at least 15
inches (38 cm) of free space in all
directions around the purifier.
The fan speed does
not change to
automatic mode.
The air quality sensor is humid, or
the ambient temperature is too high,
causing condensation on the
sensor.
Make sure the air quality sensor
is clean and dry.
Poor performance
The room area is too large.
Use the air purifier in a smaller
room.
The air inlet or outlet of the appliance
are blocked.
Clean the air inlet and outlet and
remove any obstructions.
Too noisy
Filter’s plastic packaging haven ’t been
removed.
The plastic packaging of the
filter must be removed before
use.
15
9. Specifications
• Compact Air purifier with triple filtration
• True HEPA13 filter.
• Active carbon filter
• Pre filter
• Filter change reminder indicator light
• Filtration efficiency: 99,97%
• Apt for areas of 15-20m2
• 3 power levels: Low, Medium, High
• Touch panel with 7 colours LED lights to create a warm and calm
atmosphere.
• Timer: 2,4,8 hours
• CADR: 120m3/h
• Power: 35W
• Sound level: 28-52dB
• Dimensions: diameter 190mm x height 385mm.
• Voltage: 220-240V – 50/60Hz
www.sytech.es
The color of the air
quality indicator
always remains
the same.
The air quality sensor is dirty.
Clean the air quality sensor.
Indoor air ventilation is poor. Open the window and improve air
ventilation.
After replacing the
filter, the filter
replacement
indicator light still
flashes.
The filter lifetime has not been reset
correctly.
Check the manual "Reset Filter's
lifetime".
/