7
EN
Pairing the BHS-302 and your mobile phone
Pairing is the process of linking BHS-302 with your Bluetooth-enabled mobile phone. After this
process is completed, you can use the BHS-302 with this paired mobile phone. If you want to
use the BHS-302 with another mobile phone, you must repeat the pairing process again. Even
though BHS-302 can be paired with up to 8 compatible phones it can only be connected to
one phone at a time.
When power is on, BHS-302 will automatically try to reconnect to the last-connected phone. If
the BHS-302 cannot find the phone, you can activate the connection again by pressing briefly
the Multifunction-button.
If you are pairing a new phone, make sure that the power is off.
1. Press and hold the Multifunction-button until you hear a sound and the blue and red lights
start flashing alternately.
2. Release the button. BHS-302 is now in pairing mode, waiting for your mobile phone to
contact it.
3. Complete the pairing with your mobile phone. Please refer to your mobile phone manual for
details on how to search and pair. When the mobile phone has found the device, the phone
will show Iqua BHS-302 on its display. In order to pair with the phone, enter the PIN code of
BHS-302, which is 0000.
4. After pairing, some phones do not automatically connect to the headset. If this is the case,
please ensure that you connect the phone to the headset (please refer to your mobile phone
manual). Once pairing and connecting has been successful, you will hear a sound and the blue
light will start flashing. The headset is now ready to make and receive calls.
BHS-302_Headset_UG_wNordic2.fm Page 7 Friday, September 22, 2006 2:43 PM