Transcend TS16GSSD18S-M Datasheet

Category
Solid state drives
Type
Datasheet

This manual is also suitable for

Solid State Drives I 1.8” SATA
Transcend’s 1.8” SATA SSD is equipped with a SATA-II 3.0Gb/s interface and is
designed to replace conventional 1.8” Micro-SATA Hard Disk Drives. Although smaller
in size, the 1.8” SATA SSD featues high-speed performance, low power consumption
and shock resistance similar to larger 2.5” models, making it a perfect for thin-and-
light laptops, netbooks or embedded products.
© Transcend 2012. All rights reserved. Transcend and the Transcend logo are registered trademarks of Transcend Information, Inc. Product offerings and specifications are subject to change without notice. All other products, brand names, company names and logos are trademarks of their respective owners.
www.transcend-info.com
- Non-volatile Flash Memory for outstanding data retention
- Built-in ECC (Error Correction Code) and wear-leveling
- Supports TRIM command
- Easy to install in PCs and notebooks
- Three-year limited warranty
Tiny 1.8” form-factor suits
portable devices
Significantly reduces
power consumption
78.5 ×54 ×5mm
35g
Read: 230MB/s, Write: 180MB/s
MLC
Operating: 0°C (32°F) to 70°C (158°F)**
Size
Weight
Max. Performance*
Storage Media
Operating Temperature
* Performance varies by capacity, user hardware and system configuration
**Industrial temp versions available in certain capacities
Ordering Information
16GB
32GB
64GB
128GB
TS16GSSD18S-M
TS32GSSD18S-M
TS64GSSD18S-M
TS128GSSD18S-M
16GB~128GB
Read up to 230MB/s
Write up to
180MB/s
Faster OS boot-up time
Perfect for thin-and-light
portable devices
SSD HDD
37sec
20sec
  • Page 1 1

Transcend TS16GSSD18S-M Datasheet

Category
Solid state drives
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI