Best Connectivity
www.LogiLink.
com
* The specifications and pictures are subject to change without notice.
*All trade names referenced are the registered namework of their respective owners.
Specification:
• Bracket for 1-Bay 2.5” HDD/SSD
• Supports 2.5” IDE/SATA HDD/SSD
• Supports up to a 15mm HDD
• Fit to the standard bracket on the computer case
• Material: Aluminum (case) + Iron (bracket)
• Product dimension: 115 (L) x 120 (W) x 21 (H) mm
• Unit weight: 60g
Requirements:
An available slot on the computer case
Installation:
• Slide the HDD into the bracket and secure the HDD with 2 screws on each side.
• Mount the bracket to the computer case and secure it with the screw from the PC.
• After the hardware install, connect your SATA and Power cable (not included) to the HDD
and power supply. Then you can start using it.
Art No. AD0014
Bracket for 1-Bay 2.5” HDD/SSD
- 1 -
Best Connectivity
www.LogiLink.
com
* The specifications and pictures are subject to change without notice.
*All trade names referenced are the registered namework of their respective owners.
Package Contents:
• Bracket for 2.5” HDD x 1
• User manual x 1
• Screws x 5
Packaging Information:
• Packing Dimension: 151x119x22 mm
• Packing Weight: 0.1 kg
• Carton Dimension: 400x365x150mm
• Carton Q'ty: 25pcs
• Carton Weight: 2.8kg
Art No. AD0014
Bracket for 1-Bay 2.5” HDD/SSD
- 2 -
-
1
-
2
