LG M228WD-BZ User manual

Category
LCD TVs
Type
User manual
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
service.
OWNER’S MANUAL
MM222288WWDD
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
IIDD NNuummbbeerr((ss))::
4984: M228WD
2
SAFETY PRECAUTIONS
Please read these safety precautions carefully before using the product.
WWaarrnniinngg
If you ignore the warning message, you may be seriously injured or there is a possibility of ccident or death.
CCaauuttiioonn
If you ignore the caution message, you may be slightly injured or the product may be damaged
PPrreeccaauuttiioonnss iinn iinnssttaalllliinngg tthhee PPrroodduucctt
WWaarrnniinngg
KKeeeepp aawwaayy ffrroomm hheeaatt ssoouurrcceess lliikkee eelleeccttrriiccaall hheeaatteerrss..
- Electrical shock, fire, malfunction or deformation may occur.
KKeeeepp tthhee ppaacckkiinngg aannttii--mmooiissttuurree mmaatteerriiaall oorr vviinnyyll ppaacckkiinngg oouutt ooff tthhee rreeaacchh ooff cchhiillddrreenn..
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
DDoo nnoott ppuutt hheeaavvyy oobbjjeeccttss oonn tthhee pprroodduucctt oorr ssiitt uuppoonn iitt..
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
DDoo nnoott lleeaavvee tthhee ppoowweerr oorr ssiiggnnaall ccaabbllee uunnaatttteennddeedd oonn tthhee ppaatthhwwaayy..
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
IInnssttaallll tthhee pprroodduucctt iinn aa nneeaatt aanndd ddrryy ppllaaccee..
- Dust or moisture can cause electrical shock, fire or product damage.
IIff yyoouu ccaann ssmmeellll ssmmookkee oorr ootthheerr ooddoorrss oorr hheeaarr aa ssttrraannggee ssoouunndd uunnpplluugg tthhee ppoowweerr ccoorrdd aanndd
ccoonn
ttaacctt tthhee sseerrvviiccee cceenntteerr..
- If you continue to use without taking proper measures, electrical shock or fire can occur.
IIff yyoouu ddrrooppppeedd tthhee pprroodduucctt oorr tthhee ccaassee iiss bbrrookkeenn,, ttuurrnn ooffff tthhee pprroodduucctt aanndd uunnpplluugg tthhee ppoowweerr
ccoorrdd..
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
center.
DDoo nnoott ddrroopp aann oobbjjeecctt oonn oorr aappppllyy iimmppaacctt ttoo tthhee pprroodduucctt.. DDoo nnoott tthhrrooww aannyy ttooyyss oorr oobbjjeeccttss
oonn tthhee pprroodduucctt ssccrreeeenn..
- It can cause injury to human, problem to product and damage the display.
DDoo nnoott lleett tthhee pprroodduucctt ffaallll oorr ddrroopp wwhheenn ccoonnnneeccttiinngg iitt wwiitthh aann eexxtteerrnnaall ddeevviiccee..
- This may cause injury and/or damage to the product.
WWhheenn ccoonnnneeccttiinngg iitt wwiitthh aa ggaammee ddeevviiccee,, kkeeeepp aa ddiissttaannccee ooff ffoouurr ttiimmeess aass lloonngg aass tthhee ddiiaaggoonnaall
mmeeaassuurreemmeenntt ooff tthhee ssccrreeeenn ffrroomm tthhee ddeevviiccee..
- If the product falls because of the short cable, this may cause injury and/or damage to the product.
LLeeaavviinngg aa ffiixxeedd iimmaaggee oonn tthhee ssccrreeeenn ffoorr aa lloonngg ttiimmee mmaayy ccaauussee ddaammaaggee ttoo tthhee ssccrreeeenn aanndd
ccaauussee iimmaaggee bbuurrnn--iinn.. MMaakkee ssuurree ttoo uussee aa ssccrreeeenn ssaavveerr oonn tthhee pprroodduucctt.. BBuurrnn--iinn aanndd rreellaatteedd
pprroobblleemmss aarree nnoott ccoovveerreedd bbyy tthhee wwaarrrraannttyy oonn tthhiiss pprroodduucctt..
CCaauuttiioonn
MMaakkee ssuurree tthhee pprroodduucctt vveennttiillaattiioonn hhoollee iiss nnoott bblloocckkeedd.. IInnssttaallll tthhee pprroodduucctt iinn aa ssuuiittaabbllyy wwiiddee
ppllaaccee ((mmoorree tthhaann 1100ccmm ffrroomm tthhee wwaallll))
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
DDoo nnoott bblloocckk tthhee vveennttiillaattiioonn hhoollee ooff tthhee pprroodduucctt bbyy aa ttaabblleeccllootthh oorr ccuurrttaaiinn..
- The product can be deformed or fire can break out due to overheating inside the product.
IInnssttaallll tthhee pprroodduucctt oonn aa ffllaatt aanndd ssttaabbllee ppllaaccee tthhaatt hhaass nnoo rriisskk ooff ddrrooppppiinngg tthhee pprroodduucctt..
- If the product is dropped, you may be injured or the product may be broken.
IInnssttaallll tthhee pprroodduucctt wwhheerree nnoo EEMMII ooccccuurrss..
KKeeeepp tthhee pprroodduucctt aawwaayy ffrroomm ddiirreecctt ssuunnlliigghhtt..
- The product can be damaged.
3
SAFETY PRECAUTIONS
EElleeccttrriiccaall PPoowweerr RReellaatteedd PPrreeccaauuttiioonnss
WWaarrnniinngg
MMaakkee ssuurree ttoo ccoonnnneecctt tthhee ppoowweerr ccaabbllee ttoo tthhee ggrroouunnddeedd ccuurrrreenntt..
- You may be electrocuted or injured.
UUssee tthhee rraatteedd vvoollttaaggee oonnllyy..
- The product can be damaged, or you may be electrocuted.
IInn tthhee pprreesseennccee ooff tthhuunnddeerr aanndd lliigghhttnniinngg,, nneevveerr ttoouucchh tthhee ppoowweerr ccoorrdd aanndd ssiiggnnaall ccaabbllee bbeeccaauussee iitt
ccaann bbee vveerryy ddaannggeerroouuss..
- It can cause electric shock.
DDoo nnoott ccoonnnneecctt sseevveerraall eexxtteennssiioonn ccoorrddss,, eelleeccttrriiccaall aapppplliiaanncceess oorr eelleeccttrriiccaall hheeaatteerrss ttoo aa ssiinnggllee oouuttlleett..
UUssee aa ppoowweerr bbaarr wwiitthh aa ggrroouunnddiinngg tteerrmmiinnaall ddeessiiggnneedd ffoorr eexxcclluussiivvee uussee wwiitthh tthhee ccoommppuutteerr..
- A fire can break out due to overheating.
DDoo nnoott ttoouucchh tthhee ppoowweerr pplluugg wwiitthh wweett hhaannddss.. AAddddiittiioonnaallllyy,, iiff tthhee ccoorrdd ppiinn iiss wweett oorr ccoovveerreedd wwiitthh
dduusstt,, ddrryy tthhee ppoowweerr pplluugg ccoommpplleetteellyy oorr wwiippee dduusstt ooffff..
- You may be electrocuted due to excess moisture.
IIff yyoouu ddoonntt iinntteenndd ttoo uussee tthhee pprroodduucctt ffoorr aa lloonngg ttiimmee,, uunnpplluugg tthhee ppoowweerr ccaabbllee ffrroomm tthhee pprroodduucctt..
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
FFiixx tthhee ppoowweerr ccaabbllee ccoommpplleetteellyy..
- If the power cable is not fixed completely, a fire can break out.
HHoolldd tthhee pplluugg wwhheenn ppuulllliinngg oouutt tthhee ppoowweerr ccaabbllee.. DDoo nnoott bbeenndd tthhee ppoowweerr ccoorrdd wwiitthh eexxcceessssiivvee ffoorrccee
oorr ppuutt hheeaavvyy oobbjjeeccttss oonn tthhee ppoowweerr ccoorrdd..
- The power line can be damaged, which may cause electric shock or fire.
DDoo nnoott iinnsseerrtt aa ccoonndduuccttoorr ((lliikkee aa mmeettaall cchhooppssttiicckk)) iinnttoo oonnee eenndd ooff tthhee ppoowweerr ccaabbllee wwhhiillee tthhee ootthheerr
eenndd iiss ccoonnnneecctteedd ttoo tthhee iinnppuutt tteerrmmiinnaall oonn tthhee wwaallll.. AAddddiittiioonnaallllyy,, ddoo nnoott ttoouucchh tthhee ppoowweerr ccaabbllee rriigghhtt
aafftteerr pplluuggggiinngg iinnttoo tthhee wwaallll iinnppuutt tteerrmmiinnaall..
- You may be electrocuted.
TThhee ppoowweerr ssuuppppllyy ccoorrdd iiss uusseedd aass tthhee mmaaiinn ddiissccoonnnneeccttiioonn ddeevviiccee.. EEnnssuurree tthhaatt tthhee ssoocckkeett--oouuttlleett iiss
eeaassiillyy aacccceessssiibbllee aafftteerr iinnssttaallllaattiioonn
.
MMaaiinn ppoowweerr bbrreeaakkeerr iiss tthhee ppoowweerr ccoorrdd aanndd tthhiiss bbrreeaakkiinngg ddeevviiccee mmuusstt bbee llooccaatteedd aatt aa llooccaattiioonn wwhheerree
iitt iiss eeaassyy ttoo ooppeerraattee..
CCaauuttiioonn
DDoo nnoott uunnpplluugg tthhee ppoowweerr ccoorrdd wwhhiillee tthhee pprroodduucctt iiss iinn uussee..
- Electrical shock can damage the product.
PPrreeccaauuttiioonnss iinn MMoovviinngg tthhee PPrroodduucctt
WWaarrnniinngg
MMaakkee ssuurree ttoo ttuurrnn ooffff tthhee pprroodduucctt..
- You may be electrocuted or the product can be damaged.
MMaakkee ssuurree ttoo rreemmoovvee aallll ccaabblleess bbeeffoorree mmoovviinngg tthhee pprroodduucctt..
- You may be electrocuted or the product can be damaged.
4
SAFETY PRECAUTIONS
CCaauuttiioonn
DDoo nnoott sshhoocckk tthhee pprroodduucctt wwhheenn mmoovviinngg iitt..
- You may be electrocuted or the product can be damaged.
DDoo nnoott ddiissppoossee tthhee pprroodduucctt--ppaacckkiinngg bbooxx.. UUssee iitt wwhheenn yyoouu mmoovvee..
MMaakkee tthhee ppaanneell ffaaccee ffoorrwwaarrdd aanndd hhoolldd iitt wwiitthh bbootthh hhaannddss ttoo mmoovvee..
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center
for repair.
PPrreeccaauuttiioonnss iinn UUssiinngg tthhee PPrroodduucctt
WWaarrnniinngg
DDoo nnoott ddiissaasssseemmbbllee,, rreeppaaiirr oorr mmooddiiffyy tthhee pprroodduucctt aatt yyoouurr oowwnn ddiissccrreettiioonn..
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
WWhheenn tthhee ddiissppllaayy iiss ttoo bbee lleefftt uunnaatttteennddeedd ffoorr aann eexxtteennddeedd ppeerriioodd ooff ttiimmee,, uunnpplluugg iitt ffrroomm tthhee wwaallll
oouuttlleett..
KKeeeepp tthhee pprroodduucctt aawwaayy ffrroomm wwaatteerr..
- Fire or electric shock accident can occur.
CCaauuttiioonn
DDoo nnoott ppuutt oorr ssttoorree iinnffllaammmmaabbllee ssuubbssttaanncceess nneeaarr tthhee pprroodduucctt..
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
WWhheenn cclleeaanniinngg tthhee bbrroowwnn ttuubbee ssuurrffaaccee,, uunnpplluugg tthhee ppoowweerr ccoorrdd aanndd ssccrruubb wwiitthh ssoofftt ccllootthh ttoo pprree
vveenntt ssccrraattcchhiinngg.. DDoo nnoott cclleeaann wwiitthh aa wweett ccllootthh..
- The water can sink into the product, which can cause electric shock or serious malfunction.
TTaakkee aa rreesstt ffrroomm ttiimmee ttoo ttiimmee ttoo pprrootteecctt yyoouurr vviissiioonn..
KKeeeepp tthhee pprroodduucctt cclleeaann aatt aallll ttiimmeess..
TTaakkee aa ccoommffoorrttaabbllee aanndd nnaattuurraall ppoossiittiioonn wwhheenn wwoorrkkiinngg wwiitthh aa pprroodduucctt ttoo rreellaaxx tthhee mmuusscclleess..
TTaakkee aa rreegguullaarr bbrreeaakk wwhheenn wwoorrkkiinngg wwiitthh aa pprroodduucctt ffoorr aa lloonngg ttiimmee..
DDoo nnoott pprreessss ssttrroonnggllyy uuppoonn tthhee ppaanneell wwiitthh aa hhaanndd oorr sshhaarrpp oobbjjeecctt ssuucchh aass nnaaiill,, ppeenncciill oorr ppeenn,, oorr
mmaakkee aa ssccrraattcchh oonn iitt..
KKeeeepp tthhee pprrooppeerr ddiissttaannccee ffrroomm tthhee pprroodduucctt..
- Your vision may be impaired if you look at the product too closely.
SSeett tthhee aapppprroopprriiaattee rreessoolluuttiioonn aanndd cclloocckk bbyy rreeffeerrrriinngg ttoo tthhee UUsseerrss GGuuiiddee..
- Your vision can be impaired.
UUssee aauutthhoorriizzeedd ddeetteerrggeenntt oonnllyy wwhheenn cclleeaanniinngg tthhee pprroodduucctt.. ((DDoo nnoott uussee bbeennzzeennee,, tthhiinnnneerr oorr aallccoohhooll..))
- Product can be deformed.
OOnn DDiissppoossaall
TThhee fflluuoorreesscceenntt llaammpp uusseedd iinn tthhiiss pprroodduucctt ccoonnttaaiinnss aa ssmmaallll aammoouunntt ooff mmeerrccuurryy..
DDoo nnoott ddiissppoossee ooff tthhiiss pprroodduucctt wwiitthh ggeenneerraall hhoouusseehhoolldd wwaassttee..
DDiissppoossaall ooff tthhiiss pprroodduucctt mmuusstt bbee ccaarrrriieedd oouutt iinn aaccccoorrddaannccee ttoo tthhee rreegguullaattiioonnss ooff yyoouurr llooccaall
aauutthhoorriittyy..
5
PREPARATION
FRONT PANEL CONTROLS
This is a simplified representation of the front panel. Here shown may be somewhat different from your set.
Remote Control Sensor
Power Indicator
• Power Sensor
INPUT
MENU
VOL
PROK
PROGRAMME
Buttons
VOLUME
Buttons
MENU
Button
OK
Button
INPUT
Button
6
PREPARATION
BACK PANEL INFORMATION
PCMCIA (Personal Computer Memory Card
International Association) Card Slot
(This feature is not available in all countries.)
Power Cord Socket
This set operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the set on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
Antenna Input
Connect over-the-air signals to this jack.
Component Input
Connect a component video/audio device to
these jacks.
RGB/DVI Audio Input
Connect the monitor output from a PC to the
appropriate input port.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
1
2
3
4
5
6
7
8
A
This is a simplified representation of the back panel. Here shown may be somewhat different from your set.
AC IN
AUDIO IN
(RGB/DVI)
Y
PB
PR
LR
VIDEO
COMPONENT IN
AUDIO
EJECT PCMCIA
CARD SLOT
RS-232C IN
(CONTROL & SERVICE)
RGB (PC) IN
HDMI/DVI IN
AV 1
V 1
AV 2
V 2
ANTENNA IN
1
3
4
6 75
8
2
7
PREPARATION
STAND INSTALLATION
Here shown may be somewhat different from your set.
1
2
3
4
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
Hold the
hhiinnggee bbooddyy
and bend it upward.
Hinge Body
Insert the
ssttaanndd bbooddyy
into the product until
clicking sound.
Stand Body
Assemble the parts of the
ssttaanndd bbooddyy
with
ccoovveerr bbaassee
of the product.
Cover Base
8
PREPARATION
DETACHING STAND
1
2
3
Place the set with its front facing downward on a
cushion or soft cloth.
Pull cover base backward during pressing botton
on stand body.
Hold cover base and pull with shake it backward
to separate from stand body.
4
Hold the stand and bend it upward.
5
Pull stand body to separate from set during
pressing 2 latches.
Here shown may be somewhat different from your set.
9
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary.
To connect an additional equipment, see the
EExxtteerrnnaall EEqquuiippmmeenntt SSeettuupp
section.
1
Install the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
as shown.
2
First, press the cable management. Hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
with both hands and pull it upward.
NOTE
!
GG
Do not hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
when moving the product.
- If the product is dropped, you may be injured or the product may be broken.
How to remove the cable management
Here shown may be somewhat different from your set.
10
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each side from the wall.
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
4 inches
4 inches
4 inches 4 inches
4 inches
4 inches
4 inches4 inches
4 inches
11
PREPARATION
POSITIONING YOUR DISPLAY
Here shown may be somewhat different from your set.
Adjust the position of the panel in various ways for maximum comfort.
TTiilltt rraannggee
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the set to a wall, attach VESA standard mounting interface (optional parts) to the
back of the set.
When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
0
°
~ 3
°
12
°
~8
°
12
PREPARATION
KENSINGTON SECURITY SYSTEM
- The product is equipped with a Kensington Security System connector on the back panel. Connect the
Kensington Security System cable as shown below.
- For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided
with the Kensington Security System.
For further information, contact
hhttttpp::////wwwwww..kkeennssiinnggttoonn..ccoomm
, the internet homepage of the
Kensington company. Kensington sells security systems for expensive electronic equipment such as note-
book PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the product feels cold to the touch, there may be a small “flicker” when when it is turned on.
This is normal, there is nothing wrong with product.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
13
PREPARATION
AV 3
L/MONO
R
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
AV 1 AV 2
ANTENNA
IN
EJECT
HDMI/DVI IN 1 HDMI IN 2
PCMCIA
CARD SLOT
RS-232C IN
AV 3
L/MONO
R
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
AV 1 AV 2
ANTENNA
IN
EJECT
HDMI/DVI IN 1 HDMI IN 2
PCMCIA
CARD SLOT
RS-232C IN
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
(VHF, UHF)
Wall
Antenna
Socket
RF Coaxial Wire (75 ohm)
ANTENNA CONNECTION
Antenna
UHF
Signal
Amplifier
VHF
In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown to the right.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
- Be careful not to bend the bronze
wire when connecting to an antenna
port.
- 5V antenna power works In Digital
mode only. (Refer to p. 37)
14
EXTERNAL EQUIPMENT SETUP
Connect the SET TOP outputs to the
CCOOMMPPOONNEENNTT IINN
VVIIDDEEOO
sockets (YP
B P
R
) on the set.
Connect the audio cable from the SET TOP to
CCOOMMPPOO--
NNEENNTT IINN AAUUDDIIOO
sockets of the set.
Press the
II NN PP UUTT
button to select Component
(480i/576i/480p/576p/720p/1080i).
2
3
1
HD RECEIVER SETUP
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
Here shown may be somewhat different from your set.
When connecting with a component cable
Y
P
B
PR
LR
VIDEO
COMPONENT IN
AUDIO
1
2
Signal
480i/576i
480p/576p
720p/1080i
108 0 p
Component
Yes
Yes
Yes
Yes
(only 60Hz)
HDMI
No
Yes
Yes
Yes
15
EXTERNAL EQUIPMENT SETUP
When connecting with a HDMI
Connect the HDMI output of the digital set-top box to the
HHDDMMII//DDVVII IINN
jack on the set.
Select HDMI/DVI (DTV) input source with using the
IINNPPUUTT
button on the remote control.
2
1
HDMI/DVI IN
1
Connect the digital set-top box to
HHDDMMII//DDVVII IINN
jack on the set.
Connect the audio output of the digital set-top box to
the
AAUUDDIIOO IINN ((RRGGBB//DDVVII))
jack on the set.
Turn on the digital set-top box.
(
Refer to the owner’s
manual for the digital set-top box.
)
Select
HDMI/DVI input source with using the
IINNPPUUTT
button on the remote control.
2
3
4
1
When connecting with a HDMI to DVI cable
1
2
Input
DTV
TV
AV1
AV2
Component
RGB
HDMI
GG
DTV
OK
MENU EXIT
GUIDE
INFO
i
NOTE
!
GG
When the output device is HDMI / DVI Settop box or DVD.
GG
If the output device does not meet the selected HDMI mode, the abnormal or black screen may
be displayed.
GG
In this case, select the HDMI mode appropriate for the output device, and turn off the DC power
and then turn on it again.
16
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting with a component cable
AV 1 AV 2
Y
P
B
PR
LR
VIDEO
COMPONENT IN
AUDIO
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the set
YPB PR
Video output ports
on DVD player
Y
Y
Y
Y
P
B
B-Y
Cb
Pb
P
R
R-Y
Cr
Pr
Connect the video output sockets (YP
B PR
) of the DVD to
the
CCOOMMPPOONNEENNTT IINN VVIIDDEEOO
sockets (YP
B PR
) of the
set.
Connect the audio cable from the DVD to
CCOOMMPPOONNEENNTT
IINN AAUUDDIIOO
sockets of the set.
Press the
IINNPPUUTT
button to select
Component.
Press the
PPLLAAYY
button on the DVD.
The DVD playback picture appears on the screen.
2
3
4
1
1 2
17
EXTERNAL EQUIPMENT SETUP
HDMI/DVI IN
AV 1 AV 2
(R) AUDIO (L)
AUDIO/
VIDEO
AV 1 AV 2
When connecting with a Euro Scart
Connect the Euro scart socket of the DVD to the Euro scart
socket of the set.
Press the
IINNPPUUTT
button to select
AV 1.
Press the
PPLLAAYY
button on the DVD.
The DVD playback picture appears on the screen.
2
3
1
1
NOTE
!
GG
Please use the shield scart cable.
When connecting HDMI cable
Connect the HDMI output of the DVD to the
HHDDMMII//DDVVII IINN
jack on the set.
Select HDMI/DVI (DTV) input source with using
the
IINNPPUUTT
button on the remote control.
2
1
1
GG
Set can receive the video and audio signal simultaneously with using a HDMI cable.
GG
If the DVD supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
GG
If the DVD player does not support Auto HDMI, you need to set the DVD output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
GG
When the output device is HDMI / DVI Settop box or DVD.
GG
If the output device does not meet the selected HDMI mode, the abnormal or black screen may be displayed.
GG
In this case, select the HDMI mode appropriate for the output device, and turn off the DC power and then turn on it again.
NOTE
!
Input
DTV
TV
AV1
AV2
Component
RGB
HDMI
GG
DTV
OK
MENU EXIT
GUIDE
INFO
i
18
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and set.
Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of
the screen may remain visible on the screen.
OUTPUT
SWITCH
ANT IN
R
S-VIDEO VIDEO
ANT OUT
L
ANTENNA IN
AV 1 AV 2
Wall Jack
Antenna
1
2
When connecting with an antenna
Connect the RF out socket of the VCR to the aerial socket of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using the ‘Manual
programme tuning’ section.
Select the programme number where the VCR channel is stored.
Press the
PPLLAAYY
button on the VCR.
1
2
3
4
5
19
EXTERNAL EQUIPMENT SETUP
(R) AUDIO (L)
AUDIO/
VIDEO
AV 1V 1 AV 2V 2
When connecting with a Euro Scart
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the
PPLLAAYY
button on the VCR.
If your VCR outputs an AV switching signal via the Scart
lead the set will auto switch to
AV 1 mode on start of
playback, but if you want to keep on watching in TV
mode, press the
DD
//
EE
or NUMBER buttons.
Otherwise press the
IINNPPUUTT
button on the remote control
handset to select
AV 1. The VCR play back picture appears
on the screen.
You can also record programmes received by the set on
video tape.
2
1
1
NOTE
!
GG
Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the AV1
can be received. These signals are transmitted, for example, by a pay TV decoder, game machine or
photo CD unit, etc.
GG
Please use shielded scart cable.
Insert the CI Module to
PPCCMMCCIIAA
(Personal Computer
Memory Card International Association)
CCAARRDD SSLLOOTT
of set as shown.
For further information, see p.40.
1
INSERTION OF CI MODULE
PCMCIA
CARD SLOT
TVTVTV
-- TToo vviieeww tthhee ssccrraammbblleedd ((ppaayy)) sseerrvviicceess iinn ddiiggiittaall TTVV
mmooddee..
-- TThhiiss ffeeaattuurree iiss nnoott aavvaaiillaabbllee iinn aallll ccoouunnttrriieess..
1
20
EXTERNAL EQUIPMENT SETUP
PC SETUP
This product provides Plug and Play capability, meaning that the PC adjusts automatically to the set's settings.
When connecting with a D-sub 15 pin cable
RGB OUTPUT
AUDIO
AUDIO IN
(RGB/DVI)
RGB (PC) IN
1
2
4
Connect the signal cable from the monitor output socket of
the PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the
AAUUDDIIOO IINN
((RRGGBB//DDVVII))
sock-ets of the set.
Press the INPUT button to select RGB.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
2
3
1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

LG M228WD-BZ User manual

Category
LCD TVs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI