Monster MM iCarPlay 800 User guide

Type
User guide
iCarPlay
®
Cassette 800
iCarPlay
®
Cassette 800 Features
• Lightweight, Portable Design
Storeseasilywhennotinuse
• Spring-Loaded Cassette Head
Maintainssolidcontactwithyourcassettetapeplayer’s
headforclearsound
• Dual Balanced
Conductors
Advancedcableconstructiondeliversmorenaturalaudio
• 24K Gold Minijack Contacts
Foroptimumsignaltransferandcorrosionresistance
• Convenient 3ft. (.91m) Cord
KeepsyouriPodwithineasyreach
IMPORTANT
1. To protect your hearing, lower the volume on your car stereo before
installing iCarPlay.
2. Car cassette players vary in design. BEFORE inserting iCarPlay’s cassette
unit, the cable running from the iCarPlay cassette may need to be adjusted
to correctly extend from your car’s cassette player.
ENGLISH
ENGLISH
INSTRUCTIONS
iCarPlay Set Up
1. If cable is not properly positioned for your cassette player, lift the tab on the
top right corner of the cassette unit, raising the arm.
NOTE: Illustrations may vary in appearance from actual product.
iCarPlay
®
Cassette Adapter
2. There are four notches on the iCarPlay to adjust for different cable positions,
depending on your car’s cassette player. Move the cable to the cassette unit
edge that will face OUT of your cassette player when inserted.
iCarPlay
®
Cassette Adapter
or
ENGLISH
ENGLISH
3. Close iCarPlay’s arm to its original position.
4. Turn your car audio system on and set the volume to low.
5. Insert the iCarPlay cassette into your car’s tape player, being sure the cable
exits the player door from the edge of the cassette unit that will be facing
out of your cassette player.
iCarPlay
®
Cassette Adapter
6. Insert the 1/8 inch audio plug into your iPod, iPhone, or other portable
music player’s headphone jack.
Press PLAY on your car’s cassette player if it did not start playing
automatically when the cassette was inserted.
7. Turn your music player on, select the song/playlist and press PLAY.
8. Increase the volume slightly on your car stereo and adjust the volume on
your portable player.
IMPORTANT: For the best audio performance, volume levels on your player and your car’s audio system
should be roughly the same. Disproportionate volume levels can cause audio distortion and buzz.
Troubleshooting
Some car stereo tape players with auto-reverse will automatically switch
playback direction when the iCarPlay is inserted. If no sound plays, simply push
the auto reverse button on your car stereo, and playback should begin.
ENGLISH
ENGLISH
Русский
Поиск и устранение неисправностей
Некоторые автомобильные стерео проигрыватели кассет, имеющие
функцию авто-реверса, автоматически включают воспроизведение
записей на обратной стороне при установке iCarPlay. Если воспроизведение
не включилось, просто нажмите кнопку функции авто-реверса
на автомобильной аудио системе. При этом должна включиться
функция воспроизведения.
© 2011 Monster, LLC.
7251 West Lake Mead Blvd., Las Vegas, NV 89128, USA
Monster Cable International Ltd.
Ballymaley Business Park, Gort Road, Ennis, Co. Clare, Ireland
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

Monster MM iCarPlay 800 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI