sauter BUE Assembly Instructions

Type
Assembly Instructions

This manual is also suitable for

The sauter BUE is a high-quality device designed to change O-ring stuffing boxes. Its versatility allows it to be used in various applications, including plumbing, heating, and industrial settings. The BUE is easy to install and comes with detailed instructions for proper fitting. It is a durable and reliable tool that ensures a tight seal and prevents leakage. With its sturdy construction and user-friendly design, the BUE is an excellent choice for professionals and DIY enthusiasts alike.

The sauter BUE is a high-quality device designed to change O-ring stuffing boxes. Its versatility allows it to be used in various applications, including plumbing, heating, and industrial settings. The BUE is easy to install and comes with detailed instructions for proper fitting. It is a durable and reliable tool that ensures a tight seal and prevents leakage. With its sturdy construction and user-friendly design, the BUE is an excellent choice for professionals and DIY enthusiasts alike.

1/2MV505979 B
de Installationsanweisung für die Fachkraft / Monteur
fr Notice d‘installation pour le spécialiste / monteur
en Guidelines for the technician / fitter
it Informazioni per il personale specializzato di montaggio
es Instrucciones para el especialista del ramo / montador
sv Installationsinstruktion för installatör / montör
nl Instalatie aanwijzing voor de vakman / monteur
de Zubehör: Auswechseln einer O-Ring Stopfbüchse
fr Accessoire: Changer un presse-étoupe à joint torique
en Optional extras: Changing an O-ring stuffing box
it Accessorio: Sostituzione di un premistoppa O-R
es Accesorio: Cambio de la junta prensaestopas
sv Tillbehör: Utbye av en O-ring packbox
nl Toebehoren: Vervangen van een O-ring pakkingbus
de Montagevorschrift
fr Instruction de montage
en Fitting instructions
it Intruzioni di montaggio
es Instrucciones de montaje
sv Monteringanvisning
nl Montagevoorschrift
0378369
VUD, VUE
BUD, BUE
DN65...150
1
2
26
B10723
1
B10724
38
1
2
2
B12050
B10725
38
0378369 001
1
120 Nm
3
B10726
26
1
4
0378369
2/2 MV505979 B
de Dokument aufbewahren
fr Ce document est à conserver
en Retain this document
it Conservare il documento
es Guardar el documento
sv Spara dokumenationen
nl Document bewaren
© Fr. Sauter AG
Im Surinam 55
CH-4016 Basel
Tel. +41 61 - 695 55 55
Fax +41 61 - 695 55 10
www.sauter-controls.com
info@sauter-controls.com
Printed in Switzerland
B10727
grease
5
de Allgemeine Montageangaben:
Die Montage, Inbetriebnahme und Wartung •
darf nur durch qualifiziertes Personal erfolgen.
Bei Demontage der Armatur muss: das •
Rohrleitungssystem drucklos, das Medium
abgekühlt sein.
fr Remarques concernant le montage:
Montage, mise en service et maintenance •
doivent uniquement être effectués par du
personnel qualifié.
Avant le démontage de la vanne, vérifier que le •
système de conduites soit exempt de pression
et que le liquide soit refroidi.
en Fitting guidelines
Fitting, commissioning and servicing should be •
carried out only by qualified personnel.
Before removing the valve: (i) the piping must •
not be under pressure; (ii) the medium must
have cooled down.
it Dati generali per il montaggio:
Montaggio, messa in servizio e manutenzione •
vanno effettuati solo da parte di personale
qualificato.
Nello smontaggio della valvola il sistema di •
tubazioni deve essere senza pressione e il
fluido raffredato.
sp Indicaciones para el montaje:
El montaje, puesta en marcha y servicio de •
reparaciones debe ser realizado sólo por
personal cualificado.
Antes de sacar la válvula: (i) la tubería no •
debe estar bajo presión y (ii) el fluído debe
enfriarse.
sv Montageinstruktioner:
Montage, idrifttagning och service skall endast •
ske med kvalificerad personal.
Före demontage av ventilen måste: •
rörledningen vara trycklös och mediet måste
vara avkylt.
nl Algemene montage-instructies:
Montage, inbedrijfstelling en onderhoud •
mogen alleen door gekwalificeerd personeel
worden uitgevoerd.
Voor de demontage van het ventiel •
buisleidingsysteem drukvrij maken en medium
volledig af laten koelen.
HINWEIS
Darf nicht gefettet werden!
AVIS
Ne pas lubrifier!
NOTICE
Do not lubricate
AVVISO
Non deve essere lubrificato!
AVISO
¡No engrasar!
OBS !
Får ej smörjas
LET OP
Mag niet worden ingevet!
  • Page 1 1
  • Page 2 2

sauter BUE Assembly Instructions

Type
Assembly Instructions
This manual is also suitable for

The sauter BUE is a high-quality device designed to change O-ring stuffing boxes. Its versatility allows it to be used in various applications, including plumbing, heating, and industrial settings. The BUE is easy to install and comes with detailed instructions for proper fitting. It is a durable and reliable tool that ensures a tight seal and prevents leakage. With its sturdy construction and user-friendly design, the BUE is an excellent choice for professionals and DIY enthusiasts alike.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages