LG L2104-DP Owner's manual

LG
Brand
LG
Model
L2104-DP
Category
Security cameras
Type
Owner's manual
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated danger-
ous voltage within the product’s enclosure that
may be of sucient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature accom-
panying the product.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modications to this equip-
ment may cause harmful interference unless the modica-
tions are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an
unauthorized change or modication is made.
Regulatory Notices For U.S.A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
• A suitable conduit entries, knock-outs or glands shall be
provided in the cable entries of this product in the end
user.
3
• Caution: Danger of explosion if battery is incorrectly re
placed. Replaced only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
• Holes in metal, through which insulated wires pass,
shall have smooth well rounded surfaces or shall be
provided with brushings.
Warning: Do not install this equipment in a conned space
such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the
National Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic
environment this product may cause radio interference in
which case the user may be required to take adequate meas-
ures.
Warning: To reduce a risk of re or electric shock, do not
expose this product to rain or moisture.
Caution: This installation should be made by a qualied
service person and should conform to all local codes.
Caution: To avoid electrical shock, do not open the cabinet.
Refer servicing to qualied personnel only.
Caution: The apparatus should not be exposed to water
(dripping or splashing) and no objects lled with liquids, such
as vases, should be placed on the apparatus.
4
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it means the
product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products
should be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the govern-
ment or the local authorities.
3. The correct disposal of your old appli-
ance will help prevent potential negative
consequences for the environment and
human health.
4. For more detailed information about
disposal of your old appliance, please con-
tact your city oce, waste disposal service or
the shop where you purchased the product.
LG Electronics hereby declares that this/
these product(s) is/are in compliance with
the essential
requirements and other relevant provisions
of Directive 2004/108/EC, 2006/95/EC, and
2009/125/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere,
The Netherlands (Tel : +31-(0)36-547-8888)
5
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accord
ance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specied by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the ap-
paratus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally,
or has been dropped.
6
Cautions for Safe Operation
Power Supply
This camera must always be operated at DC 12V
Certified/Listed, class 2 power supply only.
Handling of the unit
Be careful not to spill water or other liquids on the unit. Be
cautions not to get combustible or metallic material inside
the body. If used with foreign matter inside, the camera is
liable to fail or to get cause of fire or electric shock.
• Remove dust or dirt on the surface of the lens with a
blower.
• Use a dry soft cloth to clean the body. If it is very dirty,
use a cloth dampened with a small quantity of neutral
detergent then wipe dry.
• Avoid the use of volatile solvents such as thinners,
alcohol, benzene and insecticides. They may damage the
surface nish and/or impair the oper ation of the camera.
Operating and storage location
Avoid viewing a very bright object (such as light ttings) dur -
ing an extended period. Avoid operating or storing the unit in
the following locations.
• Extremely hot or cold places (operating temperature
-10 °C to 50 °C, however, we recommend that the unit be
used within a temperature range of 0 °C to 45 °C)
• Damp or dust place
• Places exposed to rain
• Places subject to strong vibration
• Close to generators of powerful electromagnetic radia
tion such as radio or TV transmitters.
7
Contents
Features .......................................................................................... 8
Part Names and Functions
................................................ 9
Connections ................................................................................ 10
Installation
................................................................................... 11
Installing the camera on a ceiling or wall ......................... 11
Adjustment .................................................................................... 13
Lens Focus Adjustment .......................................................... 14
Menu Operation
......................................................................... 15
OSD Menu Overview .............................................................. 16
General Operation .................................................................. 18
...................................................................... 19
Exposure Settings
BRIGHTNESS setting
............................................................... 20
AGC (Automatic Gain Control) setting ................................ 20
SHUTTER (Shutter Speed) setting ........................................... 20
White Balance settings ................................................................. 21
.................................................................. 19
Day/Night Setting ............................................................... 22
Privacy Setting ....................................................................... 25
Special Menu Settings ...................................................... 26
............................................. 26
................................................. 26
.......................................... 26
................................................. 26
S
etting the SHARPNESS 
Motion Detection Setting ................................................. 23
................................................................................. 29
Speci-fication
............................................................................... 30
BLC/LSC setting
S
etting the MONITOR
Setting the GAMMA effect
Setting MIRROR effect
Setting USER TITLE
DPC Setting
LANGUAGE Setting
Reset Setting
........................................................ 27
.................................................................. 28
...................................................... 28
8
Features
This Color Video Camera is designed for installation in an
indoor video surveillance system.
This manual contains instructions on how to install and man-
age the Color Video Camera in your video surveillance system.
Should you require any technical assistance, please contact
authorized service center.
Accessories
DOME CAMERA
SCREW
TEMPLATE
INSTALL ATION
MANUAL
VIDE O OUTPUT
TE S T C ABLE
•
•
•
•
•
•
•
•
•
9
Part Names and Functions
12. Lens Protection Tape
10
Monitor(or )
11
Installation
Ins
talling the camer
a on a c
eiling or
wall
(Please leave a good position of cable not to interrupt the surveillance area with it when installing.)
1. To install it, please take off the lens protection tape after opening the dome cover.
2. Secure the camera mounting bracket to the position where the camera should be mounted with the supplied screws.
Lens Protection Tape
12
Installation
. Adjust the camera lens to face the area to be monitored and x the
main body and the dome cover by aligning the grooves and rotating
the body clockwise.
13
TILT
PAN
R OTATE
Having a better view , adjust the camera
Rotate angle :
Panning angle :
Tilting angle :
Installation
Adjustment
Service Video connector
Connect a portable monitor to the video jack.
14
Lens Focus Adjustment
•
15
:SET
Menu Operation
This camera utilizes an on-screen user MENU.
To set items on the menu, use the following switch.
UP
Used to move upper direction on the menu screen. Use
this button to select an item or adjust the parameters.
DOWN
Used to move lower direction on the menu screen. Use this
button to select an item or adjust the parameters.
RIGHT
Moves the cursor to the right. Used to increment the value
selected in the menu. The parameter changes each time
this button is pressed.
LEFT
Moves the cursor to the left. Used to decrement the value
selected in the menu. The parameter changes each time
this button is pressed.
SET
Executes selections and displays a submenu for an item
with the . mark.
16
Menu Operation
OSD Menu Overview
The following table shows the list of menu items and options.
You can adapt the camera to your requirements by setting up the
respective items in these menus.
Main Menu Sub Menu Contents
EXPOSURE
ELC
ELC
ATW
AWB
MANUAL
PUSH
AUTOAUTO
SHUTTER
R-Y GAIN
B-Y GAIN
MANUAL R
MANUAL B
BURST
DAY > NIGHT
NIGHT > DAY
DELAYTIME
BLC / LSC
HSBLC
LSC
BLC
WIDE BLC
BRIGHTNESS
AGC
SHUTTER
0~99
OFF
LOW
MIDDLE
HIGH
AUTO
1/120FLK
1/250
1/500
1/1000
1/2000
1/4000
1/10000
1/100000
0~255
0~255
0~255
0~255
ON/OFF
0~255
0~255
3~12
Main Menu Sub Menu Contents
EXPOSURE
WHITE BAL
DAY&NIGHT
17
Menu Operation
Main M enu Sub M enu Contents Main M enu Sub M enu Contents
DAY&NIGHT
COLOR
B&W
OFF
SET WINDOW
ALL SET
ALL CLEAR
SENSITIVITY 0~200
OFF
ICON
TRACE
HOLD TIME 1~15
OFF
MASK NUMBER 1~4
DISPLAY ON/OFF
GRAY
BLACK
WHITE
HEIGHT 1~99
WIDTH 1~99
MOVE Y 1~99
MOVE X 1~99
MOTION DET
ON
ALARM
ON/OFF
TRACE
PRIVACY
ON
COLOR
OFF
SHARPNESS 1~49
CRT
LCD
USER
0.45
0.6
1
ON
OFF
ON
OFF
WHITE THR
LUMA LIMIT
ENG
RESET FACTORY
DPC SET
LANGUAGE
SPECIAL
ON
MONITOR
GAMMA
MIRROR
USER TITLE
18
Menu Operation
OSD MENU OSD(SCREEN CONTROL)-SETTING
1.Press OSD key down at inside of Dome base.
The setup menu screen appears on the monitor.
2.Press OSD key to upside or downside to select an option then
Press OSD key down. Submenu appears on the monitor.
3.Press OSD key to upside or downside to select a Submenu option.
4.Use OSD key to left or right to select a value.
5.Select [EXIT] and click the OSD key. Then OSD is setup.
RET: Return to the previous menu .
TOP: Return to the CAMERA SETTING menu screen.
END: Exit the setup menu.
19
OSD MENU-Exposure Settings
OSD MENU-Exposure Settings(BLC / LSC)
Menu Operation
20
Menu Operation
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

LG L2104-DP Owner's manual

LG
Brand
LG
Model
L2104-DP
Category
Security cameras
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents