MEES T6 True Wireless Earphone User manual

Brand: MEES

Model: T6 True Wireless Earphone

Type: User manual

True Wireless Earphone

True Wireless Stereo

Ergonomic Design, Easy to Wear

Distinct Acoustic Technology

Bluetooth Version: Bluetooth 5.1

Pairing Name: T6

Bluetooth Transmission Distance: Appr. 10m

Music Time: Appr. 3.5hrs

Charging Time: Appr. 1.5hrs

Earbuds Battery Capacity: 100mAh

Box Battery Capacity: 400mAh

Material: ABS

Earbud Size: 23.6x16.3x23.7 mm

Earbud Weight: Appr. 11g

Total Size: 64.3x39.86x24.9mm

Total Weight: Appr. 75g

Specifications

Package Contents :

1. Earbuds*2

2. Charging Box *1

3. Earcap (S, M, L)

4. Charging Cable *1

5. User Manual *1

Incoming call

Answer/Hang up:Press once

Reject:Press and hold for 3s

Music

Press once:Play/Pause

Press L twice:Next track

Press R twice:Previous track

Press and hold R: Volume increases

Press and hold L: Volume decreases

Product Details

Touch Key

How to Pair

The two earbuds have been connected by default. How to pair with

smartphone for the first time?

1. The earbuds automatically turn on (blue indicator lights on) when

take out from charging box, the two earbuds will auto connect with

each other in 5s.

2. Turn on the phone Bluetooth, search for T6, and click to pair. When

connected, you will hear “Connected” voice prompt and the

phone will display "connected".

When you use it again, the earbuds will auto re-connect to connect-

ed smartphone when use again. If not, please manually connect.

*It is recommended that take out two earbuds at the same, and the

left earbud will auto gets in to pairing mode with smartphone.

*You have 3 minutes to connect your earbud with your device, other-

wise the earbud will exit pairing mode. Putting the earbud back into

the charging box will re-enter the pairing mode.

*The earbuds will auto power off when no connection for 5 minutes.

*The left and right earbuds can be used as separate mono earbuds.

TWS Earbuds Pairing (left earbud/main, right earbud/sub)

*If the two earbuds haven’t been connected, please put the left

and right earbuds back into the charging box and repeat the above

steps.

*If there is no sound on either earbud, please put them back to

charging box and take out again, the two earbuds will auto recon-

nect to paired device (sometimes, please manually connect).

*The above operations need to disconnect all connections.

Instructions

How to Use (Call Mode)

1) Power On: Take out from charging box, the earbuds auto turn on.

seconds. After booting, the earbud enters the Bluetooth pairing state,

and the led light starts to flash.

2) Power Off: Put earbuds back to charging box, the earbuds auto

turn off .

3) Answer Calls: Press “Multifunctional button” to answer incoming

calls.

4) Reject Calls: Press and hold “Multifunctional button” for 3s to

reject incoming calls.

5) Hang up Calls: During a call, press “Multifunctional button” to end

Instructions

How to Use (Music Mode)

1) Play Music: Press “Multifunctional button” or operate on smart-

phone to play music. (For some smartphones, it will auto open music

player when Bluetooth connected).

2) Pause Music: During music play, press “Multifunctional button” or

operate on smartphone to pause music play.

3) Next Track: During music play, double click “Multifunctional

button” of right earbud to skip to next track.

4) Previous Track: During music play, double click “Multifunctional

button”of left earbud to back to previous track.

5) Volume increase: When playing music, long press the right ear

multi-function button for 1 second, the volume is increased by one

grid.

6) Volume decrease: When playing music, long press the left ear

multi-function button for 1 second, the volume is decreased by one

grid.

*Due to the characteristics of the Bluetooth earphone, electromag-

netic interference in the area may cause a broken connection. Based

on the characteristics of wireless technology, when the device

performs display function and transmits Bluetooth sound signals at the

same time, ‘delay’ may occur in audio signals and video signals,

that is, the sound is not synchronized with the picture.

Instructions

How to Charge

1) Charge the earbud: When earbud emits “low battery”, put it back to

charging box for charging.

2) Charge the charging box: Use Micro USB cable connects to Micro USB

port for charging. The charging box lights up blue and then goes off when it

is fully charged.

Attentions:

Please use certified charger with DC 5V current or USB-enabled PC and

charger.

CAUTION：

This product contains rechargeable lithium battery.

Battery Usage Safety Warning: 1. Do not hit, squeeze or put into fire; 2. When

a serious bulging appears, please do not use it; 3. Do not place it in high

temperature environment; 4. Do not use it after soaked.

Incorrect battery replacement may cause explosion. It only can be

replaced with the same or equivalent type.

Battery

1. The product is power by rechargeable battery. New battery performs better

after two or three cycles of full charge and discharge. The battery can be

recharged and discharge, but it will wear out.

2. Do not store it in over heat or cold places that may reduce battery capacity

and life span. It is recommended to store it in 15 ° C to 25 ° C environment. It

may not work in extreme cold or hot environment even it is fully charged.

3. Do not throw it into the fire to prevent exploding. Damaged battery may

explode. Please follow the local regulations to handle the battery. Please

recycle the battery as far as possible.

4. Please stop using it if there is a severe bulging. Do not use it after it soaked.

Tips:

Please regular recharge and discharge it every three months when unused for

long time.

Improper battery replacement may cause explosion, it is only can be replaced

with the same type or equivalent type of battery.

Precautions

•Do not put the product in damp, dusty, oil smoke or steam environment, or

expose to sunlight. Do not leave the product in vehicle for a long time, it may

cause malfunction.

•For the radio status and Bluetooth using place, the product may not work on

smartphones.

•Please adjust to proper volume, high volume may affect your hearing. For

safety, please do not use the product while driving or bicycling.

•Do not use the product in the places where may become dangerous for

sound cannot be heard, such as railway intersections, train stations, pedestrian

crossings, and construction sites, etc.

•Do not place heavy objects on the product, it may cause deformation during

long term storage.

•The accumulated static electricity in body may cause slightly tingle to ears,

wearing clothes made of natural materials can minimize the effect.

•Do not excessively strike the product.

•Please use soft dry cloth to clean the product.

•Do not put the product into water. Headphones are not waterproof.

•Beware of falling into sinks or other containers filled with water.

•Do not use headphones in wet places or in bad weather, such as rain and

snow.

•Do not humidify the product. Touch the headphones with wet hands, or put

the headphones in the damp clothes, which may cause malfunction.

· The product has magnetism, keep it away from bank cards, flash disks,

smartphones, computer monitors, TV and other electronic products.

•If feel uncomfortable when use Bluetooth device, please stop using it immedi-

ately. If the problem persists, please contact the local dealer.

•If you have any questions about this product that do not include in the

manual, please contact local dealer.

MEES T6 True Wireless Earphone User manual

Brand: MEES

Model: T6 True Wireless Earphone

Type: User manual

Download PDF

report

MEES T6 True Wireless Earphone User manual

MEES T6 True Wireless Earphone User manual

Other documents