A4Tech PK-636K User manual

Category
Webcams
Type
User manual

A4Tech PK-636K is a webcam that can be used for video calling, taking photos, and previewing images. It has a built-in microphone for clear audio, a sliding cover for lens protection, and 360-degree rotation for capturing images from any angle. The webcam is plug-and-play on Windows XP, Vista, and Windows 7, making it easy to use. For more functions such as frame, effect, face tracking, zoom, and snapshot, the driver enclosed on the CD needs to be installed. The webcam also comes with VP-EYE software, which offers a variety of features for image editing and enhancement.

A4Tech PK-636K is a webcam that can be used for video calling, taking photos, and previewing images. It has a built-in microphone for clear audio, a sliding cover for lens protection, and 360-degree rotation for capturing images from any angle. The webcam is plug-and-play on Windows XP, Vista, and Windows 7, making it easy to use. For more functions such as frame, effect, face tracking, zoom, and snapshot, the driver enclosed on the CD needs to be installed. The webcam also comes with VP-EYE software, which offers a variety of features for image editing and enhancement.

WebCam
User Manual
Model: PK- 636 K
http:// www.a4tech.com
Thank you for purchasing A4Tech webcam. Please read these instructions thoroughly for the first
time use .
Package
Package
Package
Package Contents:
Contents:
Contents:
Contents:
WebCam
CD(software and driver, u ser manual )
Quick setup guide
Know
Know
Know
Know ing
ing
ing
ing the
the
the
the Product
Product
Product
Product
No
No
No
No Driver
Driver
Driver
Driver to
to
to
to Make
Make
Make
Make Video
Video
Video
Video Calling
Calling
Calling
Calling (on Windows XP,Vista or Windows 7)
The WebCam requires no driver installation to
run on Windows XP, Vista and Window s 7. Simply
plug it to start video call ing!
The built-in microphone automatically picks up
your voice with remarkable clarity.
Sliding Cover for Lens Protecti on
360
0
Rotation: Hold preferred position for
capturing image! No direction restriction!
Step 1: Slide the cover of lens protection.
Step 2 : Plug the connector of USB cable to your
c omputer or n otebook.Then your computer will
automatically find this new hardware.
Step 3 : You can start to make video calling after you hav ing successfully installed the
webcam on your computer .
If your computer doesn't find this device , follow the steps:
a . R eplug or plug the USB cable to the other USB port.
b. T est the device on the USB port of another computer .
No-driver
No-driver
No-driver
No-driver to
to
to
to T
T
T
T ake
ake
ake
ake P
P
P
P hoto
hoto
hoto
hoto s
s
s
s or
or
or
or P
P
P
P review
review
review
review I
I
I
I mage
mage
mage
mage (
(
(
( In Windows XP )
Note:
Note:
Note:
Note:
1 . T h e WebCam is p l ug and play on Windows XP, Vista and Window s 7, but in Windows 2000,
please install the driver (enclosed on the CD) before using.
2 . For more function : Frame, Effect, F ace tracking , Zoom, Snapshot...etc , please install the
driver (enclosed on the CD) first .
1.
1.
1.
1. Driver
Driver
Driver
Driver Installation
Installation
Installation
Installation
Note: Please connect the WebCam to your computer before installation .
Step 1: U ninstall any previously installed webcam
driver .
Step 2 : Insert the enclosed CD into your computer.
Then "Figure.2" will pop up, follow the steps to finish
the installation.
Step 3 : The icon " and " " will be shown on
your d esktop screen when the driver has been
installed successfully .
Step 4 : Double-click a t right-down corner on
desktop screen , you can set Frame, Effect, Face
Tracking, Zoom and Snapshot.
Fig.2
Double - click My computer , then the
Figure .1 will pop up. >> Double-click
the Web C am icon , you can
preview image. And also y ou can take
photos by the snapshot button at the top
of th e WebCam.
Fig .1
Note: In Windows 7 or Vista, please launch the "CAP" program on CD first to preview image
or take photos.
2.
2.
2.
2. Launching
Launching
Launching
Launching AMCAP
AMCAP
AMCAP
AMCAP to
to
to
to Start
Start
Start
Start Settings
Settings
Settings
Settings
Note: PACTray icon" " on your desktop is a
shortcut of various functions in PMCap,
double click the icon , then you will see it at
the right -down corner of task bar. Right-click
the mouse , a list of available settings will be
displayed for your selection.
1.) Click ico n on your desktop
O r Start
Start
Start
Start >> Programs
Programs
Programs
Programs >> A4
A4
A4
A4 TECH
TECH
TECH
TECH PC
PC
PC
PC Camera
Camera
Camera
Camera
K
K
K
K >> PMCap,
PMCap,
PMCap,
PMCap, A MC AP image application will pop
up (as shown below)
2). If image fails to appear please select
the item preview under Options (as
shown below)
3.
3.
3.
3. Image
Image
Image
Image Control
Control
Control
Control
4.
4.
4.
4. Face
Face
Face
Face Tracking
Tracking
Tracking
Tracking &
&
&
& Effect
Effect
Effect
Effect Frame
Frame
Frame
Frame
1). S elect the Face Tracking page to tracking
your face in the middle of image page.
2). Click "Effect Frame", and select " Effect "
or " Frame , then you can set the special
effect and frame for your photos and
video.
1). Click Video Capture Filter under
Options of A MCAP page. ( as shown
below )
2.) The Stream Property page in properties
window will be opened, and some functions can
be adjusted at here according to your need s ,
including Image Control , White Balance , Auto
Mode Control …” ( as shown below )
5.
5.
5.
5. VP-EYE
VP-EYE
VP-EYE
VP-EYE Software
Software
Software
Software Installation
Installation
Installation
Installation
The latest version of VP-EYE offers a new tool that mak ing image edit or much more fun and
intuitive. There are a lot of improvements and enhancements that com ing with VP-EYE 6.0 . H ere
are some of the new features that you can expect in VP-EYE 6.0.
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting &
&
&
& FAQ
FAQ
FAQ
FAQ
Camera
Camera
Camera
Camera doesn't
doesn't
doesn't
doesn't work
work
work
work
1. Make sure the camera is connected to your computer
2. Ensure the setting s of the camera is correct on your computer
3. Check USB port of your c o mputer
Cannot
Cannot
Cannot
Cannot hear
hear
hear
hear anything
anything
anything
anything in
in
in
in your
your
your
your microphone
microphone
microphone
microphone
1. Ensure the microphone is paired with the computer
2. Make sure the microphone is turned on
3. Ensure the Webcam with built-in microphone is positioned close to your mouth
4. Check the volume setting is turned on
Product
Product
Product
Product Support
Support
Support
Support
Need help with technical support ? Please email to support@a4tech.com and our support team
will respond within 72 hours.
**Features and specifications of all A4 TECH products are subject to change without notification.
1)
Enter the se t up interface of the A4TECH PC Camera
D river installation , as shown on the right.
2)
. Click "VP-EYE Program " , and Follow on-screen steps to
finish the VP-EYE software installation.
3)
. The VP-EYE icon " " will appear on your desktop
screen.
4). Double - click VP-EYE icon " " you ll see Figure 3
pop up as shown on the right .
5) . Click the help icon " " in Figure 3 then you will learn
more function s and usage s of VP-EYE.
Fig. 3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

A4Tech PK-636K User manual

Category
Webcams
Type
User manual

A4Tech PK-636K is a webcam that can be used for video calling, taking photos, and previewing images. It has a built-in microphone for clear audio, a sliding cover for lens protection, and 360-degree rotation for capturing images from any angle. The webcam is plug-and-play on Windows XP, Vista, and Windows 7, making it easy to use. For more functions such as frame, effect, face tracking, zoom, and snapshot, the driver enclosed on the CD needs to be installed. The webcam also comes with VP-EYE software, which offers a variety of features for image editing and enhancement.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI