Question
Answer
How do I find my product
identification number?
□
The UPC (12-digits) and/or model number can be found on the following:
The product box
Your Home Depot store receipt
The user manual
A sticker (usually silver) on top of the motor housing - Please click here for
more info.
TIP: If you don't have your packaging or manual, it may be difficult to see
the label on your motor housing. Try using a mirror or your smart phone to
take a picture of the label.
Do I need to register my ceiling fan
for warranty?
□
No. there is no need to register the fan for warranty. Please keep a copy of
your receipt which will be required to honor the warranty.
Could this ceiling fan be flush
mounted?
□
No.
Can I use a longer down rod with
my ceiling fan?
□
The fan is compatible with any universal downrod with ¾’’ diameter, longer
downrod can be found on www.homedepot.com.
Can I mount the ceiling fan on a
sloped ceiling?
□
Yes, this fan can be mounted on a sloped or angled ceiling, installation will
require the purchase of an extension down rod and a canopy kit for angled
ceiling which can be purchased from www.homedepot.com. Search “ceiling
fan canopy kit.”
What kind of bulb is compatible
with my ceiling fan?
□
CFL and incandescent bulbs can be used on this ceiling fan. However, it is
important to follow wattage recommendation of the fan (190W max).
Can I change my CFL or
incandescent light bulbs to LED
light bulbs?
□
Due to inconsistencies in the manufacturing process of LED light bulbs, we
do not recommend replacing your CFL or incandescent light bulbs with LED
bulbs in ceiling fans with remote controls.
Is the light of my ceiling fan
dimmable?
□
The light is dimmable only if incandescent bulb is used. (CFL bulb cannot
be dimmed.) And you need to use a remote and receiver or wall controller
to dim the light. See following questions for compatibility.
Frequently Asked Questions: Ceiling Fan
I changed the light bulbs in my
ceiling fan light kit, and now none of
the lights work.
□
Ceiling fans are required by law to have a light limiter built in prevent over
lamping (180-watt maximum combined power draw). Refer to your ceiling
fan owner’s manual for details about the maximum wattage bulb that you
can put in your fan and not over lamp.
Can I install the ceiling fan without
light kit?
□
No. The light kit must be used with this ceiling fan.
Can I use a wall switch to control
the speed and light of my ceiling
fan?
□
Yes, the ceiling fan can be controlled by certain universal ceiling fan wall
control system. Before install a wall control, you have to make sure:
1) There are two separate wires coming out of your ceiling to control the
light and fan separately.
2) The fan speed wall control must be a 3-speed switch. An example wall
control can be ordered online at www.homedepot.com. Search
”799280.”
Can I add a remote receiver to
control my ceiling fan?
□
Yes. The ceiling fan is compatible with certain universal ceiling fan
remote/receiver control system. An example remote control set can be
ordered online at www.homedepot.com. Search “202783102.”
Can I use a dimmer switch to
control my fan speed?
□
NO, you should NEVER use a dimmer switch to control a ceiling fan. It will
cause premature wear on the capacitors and the motor. It will also cause
the fan to make noise, as the motor was intended to have a 120v AC power
source at all times. Instead, use a 3-speed wall control.
Can I use this fan outdoors?
□
No, the fan is not designed to work in high humidity (damp or wet)
conditions.
Can I use longer / shorter blades to
replace the original ones?
□
No. You can only use the blades come with the unit in the package. The
blades are designed for the motor, longer or shorter blade could cause
problem and void the warranty.
-
1
-
2
Hampton Bay 14928 FAQ
- Type
- FAQ
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Home Decorators Collection 51552 FAQ
-
-
-
-
-
-
-
-