Epson Artisan 835 User manual

Start Here

2 Squeeze the edge guides and slide them out. Then

insert paper with the glossy or printable side face-down.

3 Slide the edge guides against the paper.

4 Lower the photo tray.

5 Squeeze the edge guides and slide them out. Then

insert 4 6-inch or 5 7-inch photo paper with the

glossy or printable side face-down.

Note: Make sure the paper fits under the edge guides.

6 Slide the edge guides against the paper.

7 Keep the cassette ﬂat as you insert it.

8 Extend the output tray and ﬂip up the stopper.

Read these instructions before using your product.

Unpack

French control panel

stickers (Included for

Canada only)

Phone cord Power cord

Caution: Do not open ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials from the printer, including

from inside the paper cassette.

1 Raise the scanner and remove the transportation lock.

2 Store the transportation lock as shown.

3 Lower the scanner.

Turn on and adjust

1 Connect the power cable.

Caution: Do not connect to your computer yet.

2 Press the On button, then

raise the control panel.

To lower the control panel,

press the Unlock button.

Caution: To avoid damaging your

printer, always press and hold the

Unlock button to lower the control panel.

Select settings

1 Select your language and country.

Touch the screen to select the desired option. Press

or to see more countries.

2 Select the current Daylight Saving Time setting (Winter

or Summer) and press OK.

3 Select the date format.

4 Use the numeric keypad to set the date, then press OK.

5 Select the time format (12h or 24h).

6 Use the numeric keypad to set the time.

7 Press OK when done.

Note: You can change the date and time settings by pressing the

Home button, selecting Setup, selecting Printer Setup, then Date/

Time. For more information on using and adjusting the control panel,

see your Quick Guide.

Install ink cartridges

Note: Do not load paper yet.

1 Lift up the scanner.

2 Unpack the ink cartridges.

3 Remove only the yellow tape from each cartridge.

Caution: Don’t remove any other seals or the cartridges may

leak.

4 Insert the cartridges in the holder for each color. Press

each cartridge down until it clicks.

5 Lower the scanner.

6 Wait while the printer is priming, which takes about 5

minutes.

Note: Your printer ships with full cartridges and part of the

ink from the first cartridges is used for priming the printer.

Replacement cartridges will print more pages.

Caution: Don’t turn off the printer while it is priming or you’ll

waste ink.

Load paper

The paper cassette has 2 trays. The main tray is for A4,

letter-size, legal-size, or 8 10-inch paper. The photo tray

is for 4 6- or 5 7-inch photo paper. For instructions on

loading legal-size paper, see the online User’s Guide.

1 Pull out the paper cassette. Then slide back the photo

tray and lift it up.

*411893400*

Artisan

835 Series

Start Here

2 Squeeze the edge guides and slide them out. Then

insert paper with the glossy or printable side face-down.

3 Slide the edge guides against the paper.

4 Lower the photo tray.

5 Squeeze the edge guides and slide them out. Then

insert 4 6-inch or 5 7-inch photo paper with the

glossy or printable side face-down.

Note: Make sure the paper fits under the edge guides.

6 Slide the edge guides against the paper.

7 Keep the cassette ﬂat as you insert it.

8 Extend the output tray and ﬂip up the stopper.

Read these instructions before using your product.

Unpack

French control panel

stickers (Included for

Canada only)

Phone cord Power cord

Caution: Do not open ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials from the printer, including

from inside the paper cassette.

1 Raise the scanner and remove the transportation lock.

2 Store the transportation lock as shown.

3 Lower the scanner.

Turn on and adjust

1 Connect the power cable.

Caution: Do not connect to your computer yet.

2 Press the On button, then

raise the control panel.

To lower the control panel,

press the Unlock button.

Caution: To avoid damaging your

printer, always press and hold the

Unlock button to lower the control panel.

Select settings

1 Select your language and country.

Touch the screen to select the desired option. Press

or to see more countries.

2 Select the current Daylight Saving Time setting (Winter

or Summer) and press OK.

3 Select the date format.

4 Use the numeric keypad to set the date, then press OK.

5 Select the time format (12h or 24h).

6 Use the numeric keypad to set the time.

7 Press OK when done.

Note: You can change the date and time settings by pressing the

Home button, selecting Setup, selecting Printer Setup, then Date/

Time. For more information on using and adjusting the control panel,

see your Quick Guide.

Install ink cartridges

Note: Do not load paper yet.

1 Lift up the scanner.

2 Unpack the ink cartridges.

3 Remove only the yellow tape from each cartridge.

Caution: Don’t remove any other seals or the cartridges may

leak.

4 Insert the cartridges in the holder for each color. Press

each cartridge down until it clicks.

5 Lower the scanner.

6 Wait while the printer is priming, which takes about 5

minutes.

Note: Your printer ships with full cartridges and part of the

ink from the first cartridges is used for priming the printer.

Replacement cartridges will print more pages.

Caution: Don’t turn off the printer while it is priming or you’ll

waste ink.

Load paper

The paper cassette has 2 trays. The main tray is for A4,

letter-size, legal-size, or 8 10-inch paper. The photo tray

is for 4 6- or 5 7-inch photo paper. For instructions on

loading legal-size paper, see the online User’s Guide.

1 Pull out the paper cassette. Then slide back the photo

tray and lift it up.

*411893400*

Artisan

835 Series

Install software

1 Make sure the printer is NOT CONNECTED to your

computer.

Windows

: If you see a Found New Hardware screen, click

Cancel and disconnect the USB cable. You can’t install

your software that way.

2 Insert your product CD.

Windows: If you see the AutoPlay window, click

Run Setup.exe. If you see the User Account Control screen,

click Yes or Continue.

Macintosh

: Double-click the Epson icon.

3 Click Install and follow the on-screen instructions.

For more information on network setup, see your Quick

Guide.

Any questions?

Quick Guide

Basic steps for copying, printing, faxing, scanning, and

additional network setup instructions.

On-screen help with your software

Select Help or ? when you’re using your software.

Setup is unable to find my printer after connecting it

with a USB cable.

Make sure it is securely connected as shown:

Need paper and ink?

Try Epson premium papers with Claria

ink for better than

photo lab quality results. For the right supplies at the right

time, you can purchase them at Epson Supplies Central

at www.epson.com/ink3 (U.S. sales) or www.epson.ca

(Canadian sales). You can also purchase supplies from an

Epson Authorized reseller. To ﬁnd the nearest one, call

800-GO-EPSON (800-463-7766).

Genuine Epson Paper

Epson offers a wide variety of papers to meet your needs;

visit Epson Supplies Central for more information.

Ultra Premium Photo Paper Glossy

Instant-drying high gloss paper for

long-lasting photos, suitable for framing.

Genuine Epson Inks

Look for the numbers below

to ﬁnd your cartridges. It’s as

easy as remembering your number!

Artisan 835 Series Ink Cartridges

Color Standard-capacity High-capacity

Black — 98

Cyan 99 98

Magenta 99 98

Yellow 99 98

Light Magenta 99 98

Light Cyan 99 98

Epson is a registered trademark, Epson Exceed Your Vision is a

registered logomark and Supplies Central is a service mark of Seiko

Epson Corporation. Artisan and Claria are registered trademarks and

Designed for Excellence is a trademark of Epson America, Inc.

General Notice: Other product names used herein are for

identiﬁcation purposes only and may be trademarks of their

respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX

Connect the phone cord

To fax, connect the included phone cord from a telephone

wall jack to the LINE port on your product. To connect a

telephone or answering machine, see the Quick Guide.

Note: If you’re connecting to a DSL phone line, you must use a DSL

filter or you won’t be able to fax. Contact your DSL provider for the

necessary filter.

Choose your connection

You can connect your printer to your existing network

(wireless or wired) or directly to your computer using a

USB cable (not included). See below for details on each

connection method.

Wireless Connection

You must install the software on every computer from which

you want to print. For the ﬁrst installation, we recommend

using a USB cable (not included) to simplify wireless setup.

After the printer is connected to the network, you will be

prompted to remove the USB cable.

If you’re using Mac OS

X 10.6.x or don’t have a USB cable,

you will need to use the control panel on the printer to select

wireless settings instead.

Make sure you know your network name (SSID) and network

password:

• Network name

• Network password

If you don’t have this information, contact the person who set

up your network.

Direct USB Connection

Make sure you have a USB cable (not included). Do not

connect the printer to your computer until you’re instructed to

do so.

Wired Ethernet Connection

Make sure you have an Ethernet

network cable (not

included). You must install the software on every computer

that will print to the printer.

User’s Guide

Click the shortcut on your desktop or in the Applications/

Epson Software/Guide folder to access the online User’s

Guide, software downloads, Epson Supplies Central

, and

more (requires an internet connection).

Epson Technical Support

Visit epson.com/support (U.S.) or epson.ca/support

(Canada) where you can download drivers, view manuals, get

FAQs, or e-mail Epson.

To speak with a support specialist, call:

U.S.: (562) 276-4382, 6 AM to 8 PM, Paciﬁc Time, Monday

through Friday, and 7 AM to 4 PM, Saturday.

Canada: (905) 709-3839, 6 AM to 6 PM, Paciﬁc Time,

Monday through Friday.

Days and hours of support are subject to change without

notice. Toll or long distance charges may apply.

Software Technical Support

ABBYY

FineReader

(408) 457-9777

www.abbyyusa.com

[email protected]

Any problems?

If you experience problems during setup, see below:

Network setup was unsuccessful.

• Make sure you select the right network name (SSID).

• If you see a ﬁrewall alert message, click Unblock or Allow

to let setup continue.

• If your network has security enabled, make sure you enter

your network password (WEP key or WPA passphrase)

correctly. If it has uppercase (ABC) or lowercase (abc)

letters, make sure you enter them correctly.

Press Menu to select uppercase letters (ABC), lowercase

letters (abc), or numbers and symbols (123).

Press or until you see the character you want.

Press or to move the cursor.

Press – to delete.

Press OK when you’re ﬁnished entering your password.

You see error messages on the printer’s screen.

See your Quick Guide for troubleshooting information.