Sanus WSS51 Installation guide

Sanus
Brand
Sanus
Model
WSS51
Type
Installation guide

Sanus WSS51 is a speaker stand designed specifically to support Sonos® PLAY:5™ speakers, weighing up to 15 lbs (6.8 kg). It features a sturdy construction with a steel base and shaft, ensuring stability and durability. The stand allows for flexible placement of your speaker, with adjustable height and the option to mount it horizontally or vertically. Additionally, it includes rubber pads for protecting delicate flooring or optional carpet spikes for added grip on carpeted surfaces. The stand also comes with cable management clips to keep your speaker wires organized and out of sight.

Sanus WSS51 is a speaker stand designed specifically to support Sonos® PLAY:5™ speakers, weighing up to 15 lbs (6.8 kg). It features a sturdy construction with a steel base and shaft, ensuring stability and durability. The stand allows for flexible placement of your speaker, with adjustable height and the option to mount it horizontally or vertically. Additionally, it includes rubber pads for protecting delicate flooring or optional carpet spikes for added grip on carpeted surfaces. The stand also comes with cable management clips to keep your speaker wires organized and out of sight.

WSS
51
SPEAKER STAND
INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
2
This stand is designed to support only Sonos
®
PLAY:5™ speakers.
IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
CAUTION: Avoid potential personal injuries and property damage!
•
Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
•
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
•
Do not use this product for any purpose not explicitly specifi ed by manufacturer.
•
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
•
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at 1-800-359-5520.
Before getting started, let’s make sure this product is perfect for you!
15 lbs.
(6.8 kg)
Speaker Weight Limit
DO NOT EXCEED
Tool Needed
Screwdriver
3
Dimensions
10.90
[276.9]
5.86
[148.8]
11.00
[279.4]
4.97
[126.1]
31.46
[799.1]
TOP VIEW
FRONT VIEW
SIDE VIEW
3-D
M6 x 20 mm
M6
M6 x 20mm
M5 x 14mm
STEP 2 STEP 3 STEP 4
STEP 6
4
Parts and Hardware
NOTE: Not all hardware included will be used.
OPTIONAL
Base
Shaft Screw
Top Plate
M5 Screw
Carpet Spike
Jam Nut
Rubber Pad
Clip
Shaft
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
x1
01
x2
03
x1
02
x4
04
x4
05
x4
06
x1
07
x1
08
x2
09
Route Power Cables
STEP 1
Ethernet
(if needed)
02
5
Attach Base to Shaft
STEP 2
01
02
03
6
Optional Carpet Spikes
Rubber Pads
Install Rubber Pads -or- Carpet Spikes
STEP 3
Twist rubber pads
04
into the base
02
.
WARNING:
The ends of
carpet spikes
05
are sharp
and may scratch
flooring, damage
wiring, or be
hazardous to
children.
02
02
04
OR
06
05
===
HEIGHT ADJUST
06
05
7
Attach Top Plate to Shaft
STEP 4
M5 x 14mm
08
07
01
8
Install Speaker
OPTIONAL
STEP 5
VERTICAL
If you prefer to adhere your
speaker to the stand, use
large 3M
®
Command
™
Strips
in the locations shown.
[NOT INCLUDED]
HORIZONTAL
WALL side
W
ALL sid
e
WAL
L s
ide
WAL
L s
ide
WAL
L s
ide
WALL
s
ide
WALL side
W
ALL sid
e
W
ALL side
WALL s
ide
W
A
L
L s
ide
W
ALL side
WALL side
W
ALL s
i
d
e
WAL
L s
ide
WALL side
W
ALL sid
e
WALL side
W
ALL sid
e
W
ALL s
i
d
e
WALL
s
ide
WALL side
WAL
L s
ide
WAL
L s
ide
WALL side
WALL
s
ide
WALL side
WALL side
07
07
9
Secure Cables
STEP 6
Ethernet
(if needed)
09
10
ESPAÑOL
INSTRUCCIONES IMPORTANTES DE SEGURIDAD:
GUARDE ESTAS INSTRUCCIONES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.
Los soportes para altavoces fueron concebidos para sostener altavoces
Sonos
®
One
™
,
PLAY:1
™
y PLAY:3
™
, exclusivamente.
6,8 kg
(15 lbs.)
Peso máximo
NO EXCEDAS
herramienta necesaria
Destornillador
● Consulte el manual del usuario de su altavoz para ver si existe algún requisito especial para instalar su altavoz en la pared.
● Lea estas instrucciones en su totalidad para sentirse seguro y cómodo con este fácil proceso de instalación.
● No utilice este producto para ningún otro propósito que no sea el explícitamente especifi cado por el fabricante.
● El fabricante no se responsabiliza por ningún daño o lesión resultante del montaje incorrecto o del uso indebido.
● Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, del ensamblado o del uso del producto, póngase
en contacto con el servicio de atención al cliente al 1-800-359-5520.
Antes de comenzar, verifi quemos que este producto sea el ideal para sus necesidades.
PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
11
ESPAÑOL
Dimensiones (consulte la página 3)
Piezas y elementos de sujeción (consulte la página 4)
ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia.
Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase
en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas.
NOTA: No todos los elementos de sujeción incluidos deberán utilizarse.
ALMOHADILLAS DE AISLAMIENTO DE GOMA - Gire las almohadillas de aislamiento de goma
04
hacia la base
02
.
PUNTAS OPCIONALES PARA ALFOMBRAS - PRECAUCIÓN: Los extremos de las puntas para alfombras
05
son puntiagudos y podrían rayar el suelo, dañar el cableado o ser
peligrosos para los niños.
Ajustar la base en el tubo (consulte la página 5)
Instalar las almohadillas de aislamiento de goma o las puntas para alfombras (consulte la página 6)
Asegure los cables (consulte la página 9)
3M
®
Command
™
Strips. No incluido.
Pasar el cable de alimentación de los altavoces (consulte la página 5)
PASO 2
PASO 4
PASO 3
PASO 6
OPCIONALE
PASO 1
Instalar el altavoz (consulte la página 8)
Instalar el soporte del altavoz (consulte la página 7)
PASO 5
Milestone AV Technologies and its a liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However,
Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in
connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy,
completeness or su ciency of the information contained in this document.
©2017 Milestone AV Technologies. All rights reserved. SANUS is a division of Milestone.
All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.
Thank you for choosing SANUS! Please take a moment to let us know how we did:
SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA
6901-602161 00
Call us: 1-800-359-5520
Email us: [email protected] Leave a review: sanus.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Sanus WSS51 Installation guide

Sanus
Brand
Sanus
Model
WSS51
Type
Installation guide

Sanus WSS51 is a speaker stand designed specifically to support Sonos® PLAY:5™ speakers, weighing up to 15 lbs (6.8 kg). It features a sturdy construction with a steel base and shaft, ensuring stability and durability. The stand allows for flexible placement of your speaker, with adjustable height and the option to mount it horizontally or vertically. Additionally, it includes rubber pads for protecting delicate flooring or optional carpet spikes for added grip on carpeted surfaces. The stand also comes with cable management clips to keep your speaker wires organized and out of sight.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents