Shop fox D3275 User manual

Brand: Shop fox

Model: D3275

Type: User manual

INTRODUCTION

The SHOP FOX

Spray Gun

offers consistent spray

patterns and fast coverage, and also features a 1.8mm

nozzle, 1000cc paint canister, an optional quick-connect

nipple, and a multi-wrench.

SETUP

The Model D3275 accepts

⁄

" NPT connectors. Mount an

air regulator as close as possible to the spray gun.

Use the adjustment knob on the regulator to set

your working air pressure between 65-85 PSI.

ADJUSTMENTS

See Figure 1 to identify the location of the spray

gun controls and adjust in the following order:

1. Nozzle Control—Adjusts the spray pattern

from vertical to horizontal.

2. Pattern Control—Variably adjusts the spray

pattern from round to a wide fan.

3. Fluid Control—Adjusts how far back the

trigger can be pulled, which affects the

volume of paint released.

OPERATIONS

Hold the sprayer 8"–10" from the workpiece, and

keep the spray gun perpendicular to the workpiece

during strokes.

DO NOT pivot your wrist when

spraying!

MAINTENANCE

Clean the spray gun by flushing it with thinner.

DO NOT immerse the gun in the thinner!

2. To avoid internal damage, clean the air cap

with the supplied brush.

Instruction Sheet

Model D3275

Spray Gun

Figure 1. Model D3275.

WARNING: NO PORTION OF THIS DOCUMENT MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

SEPTEMBER 2003, PRINTED IN CHINA.

Fluid

Control

Pattern

Control

Nozzle

Control

EXPLOSION HAZARD! Do not

spray flammable fluids near

an open flame or ignition

source.

CUSTOMER SERVICE

For questions contact Woodstock International

Technical Support at (360) 734-3482, or send

e-mail to: [email protected].

EYE INJURY AND

RESPIRATORY HAZARD!

Always use safety glasses

and respirator rated for

paint and solvent vapors

while using sprayer.

D3275 Parts Diagram

REF PART # DESCRIPTION

1 XD3275001 TOOL SPANNER

2 XD3275002 QUICK CONNECTOR

3 XD3275003 AIR INLET PLUG

4 XD3275004 GUN BODY

5 XPW06M WASHER 12MM

6 XD3275006 NEEDLE CASE

7 XD3275007 O-RING

8 XD3275008 FLUID ADJUSTMENT NEEDLE

9 XD3275009 SPRING CORE

10 XD3275010 SPRING

11 XD3275011 FLUID ADJUSTMENT KNOB

12 XD3275012 SWITCH KNOB

13 XD3275013 O-RING

14 XD3275014 SPRING

15 XD3275015 SPRING

16 XD3275016 AIR VALVE STOPPER

17 XD3275017 SWITCH PIPE

18 XD3275018 O-RING

19 XD3275019 SWITCH SEAT

20 XD3275020 TENSILE WASHER

21 XD3275021 SWITCH HOUSING

REF PART # DESCRIPTION

22 XPEC02M SNAP RETAINER

23 XD3275023 TRIGGER

24 XD3275024 TRIGGER PIN

25 XD3275025 PATTERN ADJ. KNOB

26 XD3275026 O-RING

27 XD3275027 PATTERN ADJ. SCREW

28 XD3275028 NOZZLE NUT

29 XD3275029 FLUID NOZZLE CAP

30 XD3275030 FLUID NOZZLE

31 XD3275031 FLUID NOZZLE WASHER

32 XD3275032 DIRECTIONAL KNOB

33 XD3275033 TENSILE WASHER

34 XD3275034 DIRECTIONAL SCREW

35 XD3275035 COLLAR

36 XD3275036 PAINT INLET PLUG

37 XD3275037 CONTAINER COVER

38 XD3275038 GASKET

39 XD3275039 PAINT INLET PIPE

40 XD3275040 CONTAINER

41 XD3275041 PIN CASE

42 XD3275042 PIN

Shop fox D3275 User manual

Shop fox D3275 User manual

Shop fox D3275 User manual

Related papers

Other documents