2. Toro
  3. Deluxe Seat Kit, TimeCutter Riding Mower

Toro Deluxe Seat Kit, TimeCutter Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Deluxe Seat Kit, TimeCutter Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3436-798RevB
DeluxeSeatKit
TimeCutter
®
RidingMower
ModelNo.140-2057
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
2
Nopartsrequired
–
Removetheexistingseat.
Seatback
1
Bolt(5/16x1–1/2inches)
2
Nut(5/16inch)
2
3
Seat-baseassembly
1
Installthedeluxeseatkit.
4
Nopartsrequired
–
Testthesafety-interlocksystem.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch.
3.Movethemotion-controlleversoutwardtothe
NEUTRAL-LOCKpositiontoengagetheparking
brake.
4.Shutofftheengineandremovethekey.
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3436-798*B
2
RemovingtheExistingSeat
Assembly
NoPartsRequired
Procedure
1.TilttheseatupasshowninFigure1.
2.Unhookthetiltcablefromtheseatpan(Figure
1).
g313311
Figure1
1.Tiltcable
3.Disconnecttheharnessfromtheseatswitch
(Figure2).
g308594
Figure2
4.Tilttheseatdown.
5.Removethe2boltsholdingtheexistingseat
assemblyonthepivotrod(Figure3).
Note:Retainthe2boltsforinstallationofthe
deluxeseatassembly.
g308596
Figure3
6.Removetheseatassemblyfromthemachine
(Figure4).
g308665
Figure4
2
3
InstallingtheDeluxeSeat
Kit
Partsneededforthisprocedure:
1
Seatback
2
Bolt(5/16x1–1/2inches)
2
Nut(5/16inch)
1
Seat-baseassembly
Procedure
1.Securetheseat-baseassemblyontothepivot
rodwiththe2boltspreviouslyremoved(Figure
5).
g308748
Figure5
2.Slidetheseatbackontotheseat-baseposts
andaligntheholes(Figure6).
3.Securetheseatbackusing2bolts(5/16x1–1/2
inches)and2nuts(5/16inch);refertoFigure6.
Torquetheboltsto24N·m(18ft-lb).
Note:Inserttheboltsfrombacktofront.You
mayneedtoshifttheseatfabrictoinstallthe
nuts.
g298473
Figure6
1.Seatback
2.Boltsandnuts
4.Tilttheseatassemblyup.
5.Connecttheseatswitch(Figure7).
g308749
Figure7
6.Tilttheseatbackpartway.
7.Attachtheseat-tiltcablefrominsidetheseat
pan(Figure8).
3
g313032
Figure8
1.Seat-tiltcable
4
TestingtheSafety-Interlock
System
NoPartsRequired
Procedure
CAUTION
Ifsafetyinterlockswitchesaredisconnected
ordamagedthemachinecouldoperate
unexpectedlycausingpersonalinjury.
•Donottamperwiththeinterlockswitches.
•Checktheoperationoftheinterlock
switchesdailyandreplaceanydamaged
switchesbeforeoperatingthemachine.
RefertoyourOperator’sManualforthecorrect
proceduretocheckthesafety-interlocksystem.
Testthesafety-interlocksystembeforeyouusethe
machineeachtime.Ifthesafetysystemdoesnot
operateasdescribedinyourOperator’sManual,have
anAuthorizedServiceDealerrepairthesafetysystem
immediately.
ProductOverview
Controls
Fore/AftAdjustmentLever
Theseatcanmoveforwardandbackward.Position
theseatwhereyouhavethebestcontrolofthe
machineandaremostcomfortable(Figure9).
g027632
Figure9
4
/