K&N HD-1499 Installation guide

INSTALLATION:

* FREE K&N

decal To register your warranty, please see us online at knﬁ lters.com/register. FREE K&N

decal *

THESE INSTRUCTIONS MUST BE FOLLOWED EVERY TIME THE FILTER IS SERVICED,

OTHERWISE THE FILTER MAY NOT SEAL, AND DAMAGE TO THE ENGINE COULD RESULT.

INSTALLATION INSTRUCTIONS

Part Number HD-1499 and HD-1508

• 1455 CITRUS St., P.O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-858-3333 • FAX 951-826-4001

• e-mail: tech@knﬁ lters.com

• WWW: http://www.knﬁ lters.com

This ﬁ lter ﬁ ts: SEE CATALOG FOR CURRENT APPLICATIONS

19000A

03/12/09

Congratulations, you have purchased the ﬁ nest air ﬁ lter that money can buy. With proper care, this

ﬁ lter will last 1 million miles or more. This ﬁ lter can be used in a stock machine, with no modiﬁ cations

required. If any engine modiﬁ cations have been made tuning/jetting adjustments may be required.

There are special installation instructions, so please follow the procedures outlined below to ensure

the K&N

air ﬁ lter seals properly.

1. Remove the stock air ﬁ lter and stock gasket.

2. Install the stock air ﬁ lter bracket and screws onto the K&N

air ﬁ lter.

3. Install the provided gasket onto the K&N

air ﬁ lter.

4. Reinstall the stock breather hoses in the top two holes of the K&N

air ﬁ lter.

5. Install the K&N

air ﬁ lter into the air box.

6. Tighten the stock screws.

7. Reinstall the stock air cleaner cover.

Download PDF