K&N HD-1499 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the K&N HD-1499 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION:
* FREE K&N
®
decal To register your warranty, please see us online at kn lters.com/register. FREE K&N
®
decal *
THESE INSTRUCTIONS MUST BE FOLLOWED EVERY TIME THE FILTER IS SERVICED,
OTHERWISE THE FILTER MAY NOT SEAL, AND DAMAGE TO THE ENGINE COULD RESULT.
INSTALLATION INSTRUCTIONS
Part Number HD-1499 and HD-1508
• 1455 CITRUS St., P.O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-858-3333 • FAX 951-826-4001
• e-mail: tech@kn lters.com
®
• WWW: http://www.kn lters.com
®
This lter ts: SEE CATALOG FOR CURRENT APPLICATIONS
19000A
03/12/09
Congratulations, you have purchased the nest air lter that money can buy. With proper care, this
lter will last 1 million miles or more. This lter can be used in a stock machine, with no modi cations
required. If any engine modi cations have been made tuning/jetting adjustments may be required.
There are special installation instructions, so please follow the procedures outlined below to ensure
the K&N
®
air lter seals properly.
1. Remove the stock air lter and stock gasket.
2. Install the stock air lter bracket and screws onto the K&N
®
air lter.
3. Install the provided gasket onto the K&N
®
air lter.
4. Reinstall the stock breather hoses in the top two holes of the K&N
®
air lter.
5. Install the K&N
®
air lter into the air box.
6. Tighten the stock screws.
7. Reinstall the stock air cleaner cover.
/