Logic Controls S302D User manual

Advanced imaging barcode scanner

i

PROGRAMMING GUIDE

Important Notice

No warranty of any kind is made in regard to this material, including, but not limited to,

implied warranties of merchantability or fitness for any particular purpose. We are not

liable for any errors contained herein nor for incidental or consequential damages in

connection with furnishing, performance or use of this material. We shall be under no

liability in respect of any defect arising from fair wear and tear, willful damage,

negligence, abnormal working conditions, failure to follow the instructions and warnings,

or misuse or alteration or repair of the products without written approval. No part of this

document may be reproduced, transmitted, stored in a retrieval system, transcribed, or

translated into any human or computer or other language in any form or by any means

electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise,

except for brief passages which may be quoted for purposes of scholastic or literary

review, without express written consent and authorization. We reserve the right to make

changes in product design without reservation and without notification. The material in

this guide is for information only and is subject to change without notice. All trademarks

mentioned herein, registered or otherwise, are the properties of their various, ill,

assorted owners.

General Handling Precautions

Do not dispose the scanner in fire.

Do not put the scanner directly in the sun or by any heat source.

Do not use or store the scanner in a very humid place.

Do not drop the scanner or allow it to collide violently with other objects.

Do not take the scanner apart without authorization

Guidance for Printing

This manual is in A5 size. Please double check your printer setting before printing it out.

When the barcodes are to be printed out for programming, the use of a high-resolution

laser printer is strongly suggested for the best scan result.

Advanced imaging barcode scanner

ii

PROGRAMMING GUIDE

Table of Contents

Important Notice ..................................................................................................... i

General Handling Precautions ............................................................................................ i

Guidance for Printing .......................................................................................................... i

Settings and Programming ...................................................................................... 1

Programming Options ........................................................................................................ 1

Default Factory Device Settings ......................................................................................... 1

Interface Mode ....................................................................................................... 2

Interface Switch ................................................................................................................. 2

Baud Rate .......................................................................................................................... 3

Word Format: Parity, Data bits, Stop bits ........................................................................... 4

User Preferences ..................................................................................................... 6

System Settings .................................................................................................................. 6

Spanish Keyboard .............................................................................................................. 7

English Keyboard ............................................................................................................... 7

Beeper-Good Read ............................................................................................................. 8

Beeper Volume-Good Read ............................................................................................... 8

Beep During Good Decode ................................................................................................ 9

LED Illumination................................................................................................................. 9

LED-Good Read ................................................................................................................ 10

Number Of Beep-Good Read ........................................................................................... 10

Good Read Delay ............................................................................................................. 12

Same Code Delay ............................................................................................................. 13

Scan Mode ....................................................................................................................... 14

Manual Mode Timeout.................................................................................................... 14

Presentation Timeout ...................................................................................................... 14

Centering Windows ......................................................................................................... 15

Ship Image ....................................................................................................................... 16

No Read ........................................................................................................................... 16

Image Reverse ................................................................................................................. 16

Data Redundant ............................................................................................................... 17

Data Editing .......................................................................................................... 18

Prefix / Suffix ................................................................................................................... 18

Prefix Set Up Flow ............................................................................................................ 18

Suffix Set Up Flow ............................................................................................................ 19

Data Format ..................................................................................................................... 20

Advanced imaging barcode scanner

iii

PROGRAMMING GUIDE

Cap Locks ......................................................................................................................... 21

Symbologies.......................................................................................................... 22

Introduction ..................................................................................................................... 22

Message Length ............................................................................................................... 22

Codabar ................................................................................................................ 23

Codabar Enable/Disable .................................................................................................. 23

Codabar Stop/Start Characters ........................................................................................ 23

Codabar Check Characters ............................................................................................... 24

Codabar Message Length ................................................................................................ 24

Code 39 ................................................................................................................. 25

Code 39 Enable/Disable ................................................................................................... 25

Code 39 Full ASCII Conversion ......................................................................................... 25

Code 39 Append .............................................................................................................. 26

Code 39 Check Characters ............................................................................................... 26

Code 39 Start/Stop Characters ........................................................................................ 27

Code 32 Pharmaceutical .................................................................................................. 27

Code 39 Message Length ................................................................................................. 28

Trioptic ............................................................................................................................. 28

Interleaved 2 of 5 .................................................................................................. 29

Interleaved 2 of 5 Enable/Disable .................................................................................... 29

Interleaved 2 of 5 Check Characters ................................................................................ 30

Interleaved 2 of 5 Message Length .................................................................................. 30

NEC 25 .................................................................................................................. 31

NEC 25 Enable/Disable .................................................................................................... 31

NEC 25 Check Characters ................................................................................................. 32

Straight 2 of 5 Industrial ........................................................................................ 33

Straight 2 of 5 Industrial Enable/Disable ......................................................................... 33

Straight 2 of 5 Message Length ........................................................................................ 33

Matrix 2 of 5 ......................................................................................................... 34

Matrix 2 of 5 Enable/Disable ........................................................................................... 34

Matrix 2 of 5 Message Length ......................................................................................... 34

Code 11 ................................................................................................................. 35

Code 11 Enable/Disable ................................................................................................... 35

Code 11 Check Characters ............................................................................................... 35

Code 11 Message Length ................................................................................................. 36

Code 128 ............................................................................................................... 37

Advanced imaging barcode scanner

iv

PROGRAMMING GUIDE

Code 128 Enable/Disable ................................................................................................. 37

Code 128 Message Length ............................................................................................... 37

Code 93 ................................................................................................................. 38

Code 93 Enable/Disable ................................................................................................... 38

Code 93 Message Length ................................................................................................. 38

MSI ....................................................................................................................... 39

MSI Enable/Disable.......................................................................................................... 39

MSI Check Characters ...................................................................................................... 39

MSI Message Length ........................................................................................................ 40

Telepen ................................................................................................................. 41

Telepen Enable/Disable ................................................................................................... 41

Telepen Output ................................................................................................................ 41

Telepen Message Length ................................................................................................. 42

UPC/EAN/JAN ....................................................................................................... 43

UPC-A Enable/Disable...................................................................................................... 43

UPC-A Check Characters .................................................................................................. 43

UPC-A Number System .................................................................................................... 44

UPC-A 2 Digit ................................................................................................................... 44

UPC-A 5 Digit ................................................................................................................... 45

UPC-A Addenda Required ................................................................................................ 45

UPC-A Addenda Separator ............................................................................................... 46

UPC-E0 ............................................................................................................................. 46

UPC-E1 ............................................................................................................................. 47

UPC-E0 Expand ................................................................................................................ 47

UPC-E0 Check Digit .......................................................................................................... 48

UPC-E0 Number System .................................................................................................. 48

UPC-E0 Addenda 2 Digit .................................................................................................. 49

UPC-E0 Addenda 5 Digit .................................................................................................. 49

UPC-E0 Addenda Required .............................................................................................. 50

UPC-E0 Addenda Separator ............................................................................................. 50

EAN/JAN-13 ..................................................................................................................... 51

EAN/JAN-13 Check Digit .................................................................................................. 51

EAN/JAN-13 2 Check Digit Addenda ................................................................................ 52

EAN/JAN-13 5 Check Digit Addenda ................................................................................ 52

EAN/JAN-13 Addenda Required ....................................................................................... 53

EAN/JAN-13 Addenda Separator...................................................................................... 53

IBSN Translate .................................................................................................................. 54

EAN-8 ............................................................................................................................... 54

Advanced imaging barcode scanner

v

PROGRAMMING GUIDE

EAN-8 Check Digit ............................................................................................................ 55

EAN-8 Check Digit Addenda ............................................................................................. 55

EAN-8 2 Check Digit Addenda .......................................................................................... 56

EAN-8 5 Check Digit Addenda .......................................................................................... 56

EAN-8 Addenda Required ................................................................................................ 57

EAN-8 Addenda Separator ............................................................................................... 57

UPC-A/EAN-13 Extend Coupon Code ............................................................................... 58

EAN.UCC Emulation ......................................................................................................... 58

Postal Code ........................................................................................................... 59

China Postal Code ............................................................................................................ 59

China Postal Code Message Length ................................................................................. 60

Han Xin Code ................................................................................................................... 60

Han Xin Code Message Length ........................................................................................ 61

Korean Postal Code .......................................................................................................... 61

Korean Postal Code Message Length ............................................................................... 62

PostNet ............................................................................................................................ 62

PostNet Check Digit ......................................................................................................... 63

Planet Code ..................................................................................................................... 63

Planet Code Check Digit ................................................................................................... 64

British Post ....................................................................................................................... 64

Japanese Post .................................................................................................................. 65

Canadian Post .................................................................................................................. 65

Kix Post ............................................................................................................................ 66

Australian Post ................................................................................................................. 66

RSS (Reduced Space Symbology) ........................................................................... 67

RSS-14 .............................................................................................................................. 67

RSS-Limited Code ............................................................................................................. 68

RSS-Expanded Code ......................................................................................................... 69

RSS-Expanded Code Message Length .............................................................................. 69

2D Symbologies .................................................................................................... 70

PDF417 ............................................................................................................................ 70

PDF417 Message Length .................................................................................................. 70

Micro PDF417 .................................................................................................................. 71

Micro PDF417 Message Length ....................................................................................... 71

TLC39 ............................................................................................................................... 72

Codablock F ..................................................................................................................... 73

Codablock F Message Length ........................................................................................... 73

Aztec ................................................................................................................................ 74

Advanced imaging barcode scanner

vi

PROGRAMMING GUIDE

Aztec Message Length ..................................................................................................... 74

Maxicode ......................................................................................................................... 75

Maxicode Message Length .............................................................................................. 75

Data Matrix ...................................................................................................................... 76

Data Matrix Message Length ........................................................................................... 76

QR Code ........................................................................................................................... 77

QR Code Message Length ................................................................................................ 77

QR Code Advanced Data Setting ...................................................................................... 78

Maintenance ......................................................................................................... 79

Troubleshoot .................................................................................................................... 79

Appendix A ........................................................................................................... 80

Standard Default Parameters ........................................................................................... 80

Appendix B ........................................................................................................... 84

Code ID Table ................................................................................................................... 84

Appendix C ........................................................................................................... 85

Sample Barcodes ............................................................................................................. 85

Appendix D ........................................................................................................... 88

Numeric Barcodes ........................................................................................................... 88

Save ................................................................................................................................. 91

Discard ............................................................................................................................. 91

Appendix E ............................................................................................................ 92

Full ASCII Table ................................................................................................................. 92

Advanced imaging barcode scanner

1

PROGRAMMING GUIDE

Settings and Programming

Scan selected barcodes in this manual to affect setup and programming of your handheld

imaging barcode scanner. Decoding options and interface protocols can be tailored to a

specific application. Setup parameters are stored in non-volatile memory in the scanner

and are retained even when power is off. Setup parameters change only when you reset

them.

You may need to hide adjacent code patches with your hand when scanning.

Programming Options

This section contains the following two divisions:

1. Default factory device settings.

2. Supported symbologies.

Default Factory Device Settings

User Preferences

Parameter

Default

Baud Rate

115200 BPS

Word Format

None, 8, 1

Illumination

On

LED-Good Read

On

Number of Beep-Good Read

1

Good Read Delay

200

Same Code Delay

500ms

Scan Mode

Manual Trigger

Manual Mode

30000ms

Presentation

500ms

Centering Windows

Off

Ship Image

JPG/BMP

No Read

Off

Image Reverse

Off

Data Redundant

Off

Advanced imaging barcode scanner

2

PROGRAMMING GUIDE

Interface Mode

Interface Switch

The S302D imaging barcode scanner supports USB virtual COM, USB-HID and RS232. The

USB cable supports both USB virtual COM and USB-HID modes. Please install the virtual

COM port driver before using USB Virtual COM.

 To use USB Virtual COM for the first time, scan the USB Virtual COM

barcode below and then install the Virtual COM driver.

 To switch from USB Virtual Com to USB-HID mode after the virtual COM

driver is installed, scan the USB HID barcode below.

 To switch from USB Virtual Com to USB-HID mode if the virtual COM driver

is not installed:

1. Unplug USB cable from computer.

2. Press and hold the trigger while plugging USB cable to computer.

3. Scan the USB HID barcode below.

 To switch to RS232, change to RS232 interface cable, then scan barcodes on

next few pages to set up communication protocols.

USB HID

(Default)

USB Virtual COM

Advanced imaging barcode scanner

3

PROGRAMMING GUIDE

Baud Rate

Baud rate is the number of bits of data transmitted per second. Set the imager's baud

rate to match the baud rate setting of the host device. Otherwise, data may not reach

the host device or may reach it in distorted form.

1200BPS

2400BPS

4800BPS

9600BPS

19200BPS

38400BPS

Advanced imaging barcode scanner

4

PROGRAMMING GUIDE

57600BPS

115200BPS

(Default)

Word Format: Parity, Data bits, Stop bits

A parity check bit is the most significant bit of each ASCII coded character. Select the

parity type according to host device requirements. Parity: checks character bit patterns

for validity; Data bits: sets the word length; Stop bits: sets the stop bits.

None,7,1

None,7,2

None,8,1

(Default)

Advanced imaging barcode scanner

5

PROGRAMMING GUIDE

Even 7,1

Even 7,2

Even 8,1

Odd 7, 1

Odd 7, 2

Odd 8, 1

Advanced imaging barcode scanner

6

PROGRAMMING GUIDE

User Preferences

System Settings

Scan this barcode to return all parameters to the default values.

Set All Defaults

Scan this barcode to enable AUX Scanner.

Aux Scanner Enable

Scan this barcode to show scanner version.

Show Version

Advanced imaging barcode scanner

7

PROGRAMMING GUIDE

Spanish Keyboard

To enable Spanish keyboard layout in USB HID interface, please scan all 3 barcodes below

to complete the setting.

Enable Spanish keyboard

Code 128 Code Page: Binary

Code 39 Code Page: Binary

English Keyboard

To return to English keyboard from Spanish keyboard scan the following barcode.

Enable English keyboard

Advanced imaging barcode scanner

8

PROGRAMMING GUIDE

Beeper-Good Read

To enable or disable beeper, scan the following barcodes.

On

Off

Beeper Volume-Good Read

To select a beeper volume, scan the Low Volume, Medium Volume, or High Volume

barcode.

Off

Low Volume

Medium Volume

High Volume

Advanced imaging barcode scanner

9

PROGRAMMING GUIDE

Beep During Good Decode

Scan a barcode below to select the duration of the beep signal after a good decode.

Normal

Short

LED Illumination

To enable or disable LED illumination, scan the following barcodes.

On

(Default)

Off

Advanced imaging barcode scanner

10

PROGRAMMING GUIDE

LED-Good Read

To enable or disable LED indicator after a good read, scan the following barcodes.

On

(Default)

Off

Number Of Beep-Good Read

Scan a barcode below to select the number of the beep signal to sound after a good

decode.

1

(Default)

2

3

Advanced imaging barcode scanner

11

PROGRAMMING GUIDE

4

5

6

7

8

Advanced imaging barcode scanner

12

PROGRAMMING GUIDE

Good Read Delay

Scan a barcode below to set the minimum amount of time before the imager can read

another barcode after a good read.

No Delay

200ms

(Default)

500ms

2000ms

*Specified

*To set your own length for the good read delay, scan the “Specified” barcode, then set

the delay by scanning digits from the Appendix, then scan “Save”.

Advanced imaging barcode scanner

13

PROGRAMMING GUIDE

Same Code Delay

Scan a barcode below to set the minimum amount of time before the imager can read

the same barcode a second time.

No Delay

500ms

(Default)

2000ms

Page is loading ...

Logic Controls S302D User manual

Logic Controls S302D User manual

Related papers

Other documents