Westinghouse 7500400 Operating instructions

Type
Operating instructions
INSTRUCTIONS
STEP 1: Mark a center line on back of picture frame.
STEP 2: Line up holes of arm with center of frame.
STEP 3: Attach arm to back of picture frame with screws provided.
STEP 4: Adjust depth and pitch of light.
STEP 5: Tighten set screws.
INSTRUCCIONES
PASO 1: Marcar un eje longitudinal en la parte posterior del marco del cuadro.
PASO 2: Alinear los agujeros del brazo con el centro del marco.
PASO 3: Acoplar el barzo posterior del marco del cuadro con los tornillos suministrados.
PASO 4: Adjustar la profundidad la inclinación de la lámpara.
PASO 5: Aprieta el tornillo.
Screws
Holes
Arm
Picture Light
Set Screws
Pitch Adjustment
Frame
Tornillos
Agujeros
Brazo
Luces para Cuadros
Tornillo
Adjuste de la inclinación
Marco
Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A.
www.westinghouselighting.com
, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF
are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting
All rights reserved.
Made in China
ES-WH-043
  • Page 1 1

Westinghouse 7500400 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI