1.Allow Tosee plus use mobile cellular data and wireless LAN
(Function:If not allowed,it will be failed to add ip camera)
2.Allow Tosee Plus to get system push message permissions
(Function:When the camera triggers motion Detection or audible
alarm .The phone can receive alarm push)
Note:Please Allow Below 2 Permissions When First Running APP.
1.Open “ ”App And click ”Tosee Plus +“
3
2
4
8
Setting-Device information-Device Name
Adjust The PIR Setting
PIR Mobile detection Sensitivity is default "Start" and the default
sensitivity is at "High"and the detecting distance is 5 meters
(15Ft),and it is adjustable in "Device settings"-"Mobile detection
sensitivity.
Charging port
solar charging
1
Email:Support@hfwvision.com
14*7
Tosee Plu s
All Dev ices