Keep these instructions for future
reference. If the equipment changes
ownership, be sure this manual
accompanies equipment. Please refer to
the SAFETY INSTRUCTIONS for important
safety information prior to using this oven.
Owner’s Manual
HIGH SPEED COMMERCIAL COMBINATION OVEN
PRESS
2
Model Identication
Any questions or to locate an authorized ACP servicer,
call ACP ComServ Service Support.
– Inside the U.S.A. or Canada, call toll-free at 866-
426-2621.
– Outside the U.S.A. and Canada, call 319-368-8120.
– Email: [email protected]
Warranty service must be performed by an authorized
ACP servicer. ACP also recommends contacting an
authorized ACP servicer, or ACP ComServ Service
Support if service is required after warranty expires.
When contacting ACP, provide product information.
Product information is located on oven serial plate.
Record the following information:
Model Number: _____________________________
Serial or S/N Number: ________________________
Date of installation: __________________________
Dealer’s name and address: ___________________
__________________________________________
__________________________________________
To avoid risk of electrical shock or death, this oven must be grounded and plug must not be altered.
Grounding/Earthing Instructions
Oven MUST be grounded. Grounding reduces risk of electric shock by providing an escape wire for the electric
current if an electrical short occurs. This oven is equipped with a cord having a grounding wire with
a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
Consult a qualied electrician or servicer if grounding instructions are not completely understood, or
if doubt exists as to whether the oven is properly grounded.
Do not use an extension cord.
If the product power cord is too short, have a qualied electrician install a three-slot receptacle. This
oven should be plugged into a separate circuit with the electrical rating as provided in product specications. When
the combination oven is on a circuit with other equipment, an increase in cooking times may be required and fuses
can be blown.
External Equipotential Earthing Terminal (export only)
Equipment has secondary earthing terminal. Terminal provides external earthing connection used in addition to
earthing prong on plug. Located on outside of oven back, terminal is marked with symbol shown below.
WARNING
Before using your oven, please take the time to read the Safety Instructions which shipped with the oven.
3
Features
1
2
3
4
5
6
7
3
1 Door Handle
Ergonomically designed for one handed operation.
2 Unit Serial Number
Located on the lower left hand side and back of the
oven.
3 Air Filters
The oven has two air lters. Each are located on
the lower sides of the oven. To remove, simply slide
out.
4 Display
Display provides user interface.
5 ON/OFF Pad
Use to turn on and shut oven off.
6 Keypad
Use for time input, programmed pads and data
input.
7 USB Port / Protective Cover
The oven is equipped with an USB Data Port. Use
with standard ash drives.
To program the oven using standard ash drive:
Oven must be in Off mode (Preheat must be OFF)
1. Remove protective cover from bottom of keypad.
2. Insert the ash drive into the slot located below the keypad.
3. From Off, press and hold the “2” pad to go to “User Options”.
4. Go to Option #17 by pressing “Back ” or repeatedly pressing “Enter ”
5. Select the desired operation by highlighting “Transfer card to oven ” or “Transfer oven
to ash drive ” with the Scroll Up or Scroll Down keypad.
*Important Note: After inserting ash drive in USB port wait at least 6 seconds before proceeding to Step 6.
6. Press the “Program ” pad to begin the transfer (The screen will indicate”TRANSFERRING” and indicate
“DONE” wait 15 seconds then transfer is complete.) *Important Note: If you do not wait 15 seconds when new
upload is attempted the screen will indicate “ NOT AXP CARD”.
7. Remove ash drive and close the protective cover.
4
STEP 3 - Install Rack
• Install oven rack
1. Oven cavity must be cool to touch.
2. Place rack in oven with rear guard positioned toward the
. the back of the oven.
• DO NOT cook food directly on oor of oven.
Installation
STEP 2 - Place Oven on Counter
• Recommended countertop surface depth is 26” (66 cm).
• Do not install oven next to or above source of heat, such as pizza oven
or deep fat fryer. This could cause oven to operate improperly and could
shorten life of electrical parts.
• Do not block or obstruct oven lters. Allow access for cleaning.
• Install oven on level countertop surface.
• Outlet should be located so that plug is accessible when oven is in place.
A
C
D
B
To avoid risk of electrical shock or
death, this oven must be grounded
and plug must not be altered.
STEP 1 - Unpack Oven
• Inspect oven for damage such as dents in door or inside oven cavity.
• Report any dents or breakage to source of purchase immediately.
Do not attempt to use oven if damaged.
• Remove all packing materials from oven interior.
• If oven has been stored in extremely cold area, wait a few hours before
connecting power.
Oven Clearances
A—For North American (UL/CSA)
models, allow at least 2” (5.1 cm) of
clearance around top of oven. For
International (50 Hz) models, allow
at least 7” (18 cm) of clearance
around top of oven. Proper air
ow around oven cools electrical
components. With restricted air ow,
oven may not operate properly and
life of electrical parts is reduced.
B—Allow at least 2” (5.1 cm) between air
discharge on back of oven and back
wall.
C—Allow at least 2” (5.1 cm) of
clearance around sides of oven.
D—Install combination oven so oven
bottom is at least 3 feet (91.5 cm)
above oor.
STEP 4 - Oven Operation
Preheating the Oven
This oven can be set to a preheat temperature between
200°F (95°C) and 520°F (270°C).
1. Oven must be plugged in.
2. Press ON / OFF key
3. The preheat temperature of the oven will
appear in the display.
5. PREHEATING icon will display until oven
reaches preheat temperature. The menu
screen will then appear.
TURNING THE OVEN OFF
At the end of the day, turn the oven off by pressing the ON / OFF pad on
the keypad.
The oven fan will continue to run to cool the oven.The oven Cooling
Mode Icon appears and stays on until the oven temperature is below
200°F (95°C) To avoid damage to the convection motor do not turn off
power by unplugging the unit or shutting off the power breaker until the
fan stops.The Oven Off Icon appears for 5 minutes until display goes
blank.
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
5
General User Instructions
COOKING TIPS
1. Metal containers can be used in the AXP with a height no more than 2 inches. Different types of metal
conduct heat at different speeds. Aluminum heats faster than stainless steel. Avoid using silcone pans and
accessories.
2. Stage cooking aids in retaining the quality of frozen and delicate foods. Finishing baked goods at 0%
Microwave, Fan and IR (Radiant) is a great way to get the added browning and crisping without over cooking.
3. Take advantage of the accessories:
a. Non-Stick Basket (SB10 or TB10): Aids in browning and crisping of food. Also makes cleaning up
easier. Great for breaded products like chicken ngers, fries, mozzarella sticks, jalapeno poppers.
b. Baking Sheet (1/4 size): Great for foods that do not need directed heat from the radiant element, and
for foods that may drip any grease or seasoning.
c. Oven Paddle (PA10): Aids in removal of sandwiches and pizza from Convection Express™ and AXP
ovens.
d. Pizza Screen: Great browning and crisping for toasted sandwiches & pizzas, or any food that needs
directed heat from the radiant element.
e. Ceramic Dish: Great for foods that need to be contained such as ready-to-serve foods, cut vegetables
or soups.
f. Pizza Stone(ST10X): Aids in crisping and browning breads and pizzas.
g. Panini Grill Accessory (GR10): Aids in adding grill marks on a product.
4. The most frequently used oven temperature is 520º F (270º C). Reduce the oven temperature if the product is
cooked for an extended period of time.
5. Line the sheet pan with parchment paper for easy removal of food after heating and cleaning.
6. Mufn tins work great for individual cakes & brownies. Spray with cooking spray prior to cooking for easy re-
moval of food after heating.
7. Frequent cleaning prevents unnecessary buildup that may affect the oven performance.
8. Use a cleaner such as ACP Oven Cleaner (CL10) & Oven Shield (SH10) or another cleaning product that does
not contain ammonia, phosphates, chlorine, sodium hydroxide or potassium hydroxide as they can damage
critical oven parts and may void the warranty on those parts.
9. Items will be hot when nished cooking. Be sure to use oven mit, tongs or pizza paddle to safely remove items
from the oven.
WHEN TO USE STAGE COOKING
Stage cooking enables you to use up to four different cooking cycles or stages to be used consecutively without
repeated input from the user.
Example:
Egg Rolls(Frozen), Total Cook Time: 1:30
Temperature 520° F
Stage 1 Stage 2
Time 1:00 :30
Microwave 100% 90%
Fan 80% 60%
IR 100% 100%
6
Touch Panel Symbol Description
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
13
2
46
5
7 8
0
9
abc def
jklghi
. ’ - #
mno
tuvpqrs wxyz
& /
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
Scroll
Up
Scroll
Down
Use Scroll Up and Scroll
Down to highlight food
categories.
Back
Enter
Menu Screen
ON / OFF
Program
Temperature
Manual Cook
Number
Pads
Stop
Start
ON / OFF Keypad
• Press to preheat oven or turn oven off.
(Fan will continue to run if temperature
is over 200°F / 95°C).
TEMPERATURE Keypad
• Press to check set temperature.
• Press to change temperature.
• Press Number keypads to enter or
change temperature.
• Press Enter to save.
PROGRAM Keypad
• Press to program new product or
change existing programs.
• Press to start data key transfer.
• Press to change password.
EDIT
• Select to program new product or
change existing programs.
DELETE
• Select to delete programs.
MANUAL COOK Keypad
• Press for manual cooking.
7
Touch Panel Symbol Description
SCROLL UP Keypad
• Press to change setting or move up to
another setting.
• Press to move up to another highlighted
area.
SCROLL DOWN Keypad
• Press to change setting or move down to
another setting.
• Press to move down to another
highlighted area.
START Keypad
• Press to start cooking cycle.
• Press to save option in option mode.
STOP / RESET Keypad
• Press to stop cooking cycle.
• Press to exit option in option mode.
BACK Keypad
• Press repeatedly to return to main menu.
• Press to go to previous screen.
• Press repeatedly to exit program mode.
• Press to erase a character.
ENTER Keypad
• Press to save a menu.
• Press to save a MANUAL COOK
program.
• Press to go to next screen.
• Press to save a name.
• Press to conrm deletion of a menu item.
NUMBER Keypads
• Press to input temperature
settings.
• Press to select menu items.
• Press to input names of
menu items.
13
2
46
5
7 8
0
9
abc def
jklghi
. ’ - #
mno
tuvpqrs wxyz
& /
Oven Cooling Mode Icon:
• The oven fan will continue to run to cool
the oven.The oven Cooling Mode Icon
appears and stays on until the oven
temperature is below 200°F (95°C).
• To avoid damage to the convection motor,
do not turn off power by unplugging the
unit or shutting off the power breaker until
the fan stops.
Oven Off Icon:
• The Oven Off Icon appears for 5 minutes
then the display goes blank.
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
Oven Temperature Out of Range:
• When oven temperature is out
of range of a cooking program
set point. A line will be through
that item or items preventing
it from being selected. Place
the oven in Program Mode to
view temperature set point of
that cooking program. If the
temperature of the oven needs
to be changed after reviewing
temperature for the cooking
program, exit programming
mode and change oven
temperature.
Program
EDIT
View Temperature
Change Oven Temperature
Preheat Temperature Warning Icon:
• Oven not up to temperature
setpoint.
• Preheat temperature warning will
ash when programing cook cycle
until temperature setpoint is met.
8
The oven screen displays menu options. The keypad is used to
navigate through onscreen menus.
The icons below will be used throughout this guide to indicate menu navigation.
General User Instructions
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
13
2
46
5
7 8
0
9
abc def
jklghi
. ’ - #
mno
tuvpqrs wxyz
& /
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
COOKING MENUS
Your ovens ship with the cooking screens set to
three menu levels.
1. The MENU CATEGORIES screen highlights
product categories.
2. The FOOD CATEGORIES screen features
products within the main menu category.
3. The MENU ITEM screen features products
within the food category screen.
NOTE: The oven can be set to operate with 1, 2, or 3
menu levels. See user options for more details.
The ITEM MENU breaks the
item group menu down further allowing you to
input quantities, different food types, etc.
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6
7
8
9
0
Sandwich
Breakfast
1 Breakfast
2 Poultry
3 Meat
4 Seafood
5 Vegetarian
6
7
8
9
0
Sandwich
THREE MENU LEVELS
TWO MENU LEVELS
ONE MENU LEVEL
Scroll
Up
Scroll
Down
Use Scroll Up and
Scroll Down to
highlight food
categories
Back
1 Breakfast
2 Poultry
3 Meat
4 Seafood
5 Vegetarian
6
7
8
9
0
Sandwich
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6
7
8
9
0
Sandwich
Breakfast
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6
7
8
9
0
Sandwich
Breakfast
Enter
Menu Categories Food Category Menu Item
Food Category Menu Item
Menu Item
9
General User Instructions
MAIN COOKING MENU
After the oven has preheated, the menu appears. The AXP high speed
oven comes preprogrammed with several menu items to simplify
cooking.
Examples of Preprogrammed Menu Items Include:
Cooking with Preprogrammed Pads
To cook food using preprogrammed menu items
1. After oven has preheated to the
desired temperature, scroll or
press number to choose desired
food category from menu.
2. Choose menu item group
and press Enter to select.
3. Highlight item you wish to cook.
Note: If there is a line though the menu
item, then preheat temperature is
different than menu item preset
temperature. The control will not allow
you to select that item.
4. Open oven door, place
food in oven and close door.
5. Press Enter to start cooking
process.
6. At end of cooking cycle, oven
beeps and displays animation
at right:
123
13
2
46
5
7 8
0
9
abc def
jklghi
. ’ - #
mno
tuvpqrs wxyz
& /
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
1. Sandwich
- Breakfast
- Poultry
- Meat
- Seafood
- Vegetarian
3. Vegetarian
- Breakfast
- Lunch
- Vegetables
- Appetizers
- Potatoes
5. Pasta-Pizza
- Small/Large Pizza
- Pasta
- Miscellaneous
2. Meat
- Poultry
- Beef
- Pork
- Appetizers
- Breakfast
4. Seafood
- Fish
- Shellsh
- Misc
6. Bakery-Desserts
- Bread
- Desserts
- Snacks
- Breakfast
- Sweet
Enter
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6
7
8
9
0
Sandwich
Breakfast
Back
1 Breakfast
2 Poultry
3 Meat
4 Seafood
5 Vegetarian
6
7
8
9
0
Sandwich
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
Note: Menu Items may vary by model.
10
Manual Cooking
Using MANUAL COOK (Option 4 has to be set to allow manual cooking see page 18)
Use Manual cooking when a specic entered time and cooking power levels are desired. It’s very useful when you are
experimenting with new food items. Maximum cook time is 100 minutes. Microwave, Fan and IR can be set to 11 different
power levels between 0-100% with 10% increments.
1. After oven has preheated to desired
temperature (200-520°F / 95-270°C), press
Manual Cook keypad.
2. Use Scroll Up and Scroll Down keypad
to move between cooking elements and time
3. For Stage 1, enter cooking time using the
number pads (up to 100 minutes). Press Scroll
Down keypad to move to the following cooking
element.
4. Enter desired microwave power (press 0 (for
0%), 1 (10%), press 5 (50%)… and press
1 twice for full power (100%). Press Scroll
Down keypad to move to the following cooking
element
5. Input desired fan speed using number keypad.
6. Enter desired Infrared (IR) power (press 0 (for
0%), 1 (10%), press 5 (50%)… and press 1
twice for full power (100%).
7. Repeat steps 2-6 for each cooking stage, if
more than one cooking stage is necessary.
8. Place food in oven.
9. Press Start keypad to begin cooking.
The display counts down. The food
category is displayed and the word Manual is
in the display.
How to Save A Manual Cook
Program to the Menu
If you’re satised with the cooking results
achieved from manual cooking you can
save the manual cook item.
1. To save, press Enter keypad.
Note: Option 5 must be set to save
after manual cook. (See page 18)
2. Highlight Menu Category by using Scroll Up or
Scroll Down keypad or create new Menu Category
name. Press Enter keypad.
3. Highlight food category by using Scroll Up and
Scroll Down keypad to select open menu location.
4. In the Menu Item screen, highlight the location where
you wish to add the new name.
5. When new location is highlighted Press Program
keypad.
6. Use Number
KEYPAD
keypads to enter item name. Use
Back keypad to delete any mistakes. This step
needs to be repeated for each menu level. See user
option 2 for text case options page 18.
7. Press Enter keypad when nished.
8. To exit Manual Cook mode, press Back keypad
repeatedly to take you to the Main Menu screen.
10. At end of cooking cycle, oven beeps and displays
animation below:
Note: To interrupt cooking cycle,
open door. To resume cooking,
close door and press start.
11. Remove food from oven.
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6 Bagel & Cheese
7
8
9
0
Sandwich
Breakfast
Bagel & Cheese
Sandwich
Breakfast
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6
7
8
9
0
Breakfast
11
1. Press the Program keypad.
2. Highlight Edit with Scroll Up or Scroll Down
keypad.
3. Press the Enter keypad
4. Use the Scroll Up or Scroll Down keypad to
highlight Menu Category and/or Food Category where
menu item to edit is saved. Press Enter keypad.
5. At the Menu item screen, use Scroll Up or Scroll
Down keypad to highlight the desired item to edit.
PROGRAM Add a new menu item
ENTER To save or go to next screen
BACK Go to previous screen
SCROLL UP or SCROLL DOWN
EDIT Change an existing menu item
DELETE Delete an existing menu item
ACCESSING THE PROGRAM MENU
1. To access the PROGRAM mode, press
the Program keypad.
2. Then select Edit with Scroll Up or
Scroll Down from the screen.
3. Press Enter then select the food
category, food item to be programed using the
Scroll Up or Scroll Down keypad.
Oven Programming
PROGRAM MENU OVERVIEW
EDITING OR ADDING MENU PROGRAM
SETTINGS
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
6. Press the Enter keypad and cook settings will
appear.
7. Use Scroll Up or Scroll Down keypad to
Select Temperature, Time, Microwave %, Fan% and
IR% setting. Use number keypads to enter the time,
temperature or cooking powers. For MW, Fan or IR,
press 0 for 0%, 1 for 10%..... 9 for 90% or 1 twice for
100%.
8. When cook settings are complete press Enter
keypad.
9. Press Back keypad repeatedly to exit program mode.
1 Breakfast
2 Poultry
3 Meat
4 Seafood
5 Vegetarian
6
7
8
9
0
Sandwich
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6
7
8
9
0
Sandwich
Breakfast
Cook Time
Oven Temperature
IR
Fan
Microwave Power
12
1. Press the Program keypad.
2. Highlight Edit with Scroll Up or Scroll Down
keypad and press Enter keypad.
3. Using the Scroll Up or Scroll Down keypad to
highlight location where new category or item will be placed.
(In order to navigate to the following screen, Scroll Up
and Scroll Down keypad to highlight desired menu and
press Enter keypad). For example:
I. Editing Name in Menu Category Screen
A. Highlight Item B. go to Step 4
II. Editing Name in Food Category
EDITING OR ADDING NEW NAMES FOR
MENU CATEGORY OR FOOD CATEGORY
OR MENU ITEM
Oven Programming
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
A. Highlight desired Menu Category
B. Press Enter
C. Highlight desired Food Category
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
III. Editing / Adding Name in Menu Item
In order to add program settings, you must name your item
rst.
4. Press the Program keypad.
1 Breakfast
2 Poultry
3 Meat
4 Seafood
5 Vegetarian
6
7
8
9
0
Sandwich
D. Go to Step 4
A. Highlight desired Menu Category
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
B. Press Enter
C. Highlight desired Food Category
1 Breakfast
2 Poultry
3 Meat
4 Seafood
5 Vegetarian
6
7
8
9
0
Sandwich
D. Press Enter
E. Highlight desired Menu Item
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6
7
8
9
0
Sandwich
Breakfast
F. Go to Step 4
13
Oven Programming
1. Press the Program keypad.
2. Highlight Delete with Scroll Up or Scroll Down
keypad.
3. Press the Enter keypad.
4. Using the Scroll Up or Scroll Down keypad to
highlight Menu Category and/or Food Category and/or Menu
Item where the single menu item to delete is saved. Press
Program keypad after highlighting the desired menu
item.
5. Press the Enter keypad to Conrm the deletion of the
menu item..
6. Name and program are deleted.
7. Press Back keypad repeatedly to exit program mode.
DELETING A SINGLE MENU ITEM
.
_ , & , / , 0
5. Enter name for category or item using keypad digits for
letters, numbers and symbols. [For example: Press Keypad
“2” three times for letter “c”]
When the correct letter is displayed, wait until cursor moves to
the next space. If a correction is necessary, press back
to erase one character at a time.See user option 2 for text
case options (page 18).
6. Press the Enter keypad to save name and it will take
you to the next screen. If you are adding or editing a menu
item (last screen), after pressing enter will take you to the
program setting screen.
7. Press Back keypad repeatedly to exit program mode.
1 Biscuit E.B.C._
Breakfast
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
X X X
1 Breakfast
2 Poultry
3 Meat
4 Seafood
5 Vegetarian
6
7
8
9
0
Sandwich
X X X
1 Biscuit E.B.C.
2 B. fast Croissant
3 Croissant Sand
4 English Mu san
5 Biscuit S.E.C.
6
7
8
9
0
Breakfast
X X X
Breakfast
Biscuit E.B.C.
Sandwich
14
DELETING A WHOLE MENU CATEGORY
OR FOOD CATEGORY
Deleting a whole menu category or food category will
delete all the menu items underneath that group (up
to 100 menus for any of the menu category and 10
menu items for the food category).
1. Press the Program keypad.
2. Highlight Delete with Scroll Up or Scroll Down
keypad.
3. Press the Enter keypad.
4. Using the Scroll Up or Scroll Down keypad to
highlight Menu Category and/or Food Category to delete.
Press Program keypad after selecting menu or food
category to delete.
5. Press the Enter keypad again to conrm the deletion of
the menu item.
6. Menu name and all programs in that category are deleted.
7. Press Back keypad repeatedly to exit program mode.
Oven Programming
1 Sandwich
2 Meat
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
X X X
Meat
1 Sandwich
2
3 Vegetarian
4 Seafood
5 Pasta-Pizza
6 Bake-Dess
7
8
9
0
15
Microwave Only Feature
USING OVEN AS A MICROWAVE OVEN
This option is only available if the oven cavity temperature is
less than 200°F.
To access the MICROWAVE ONLY button, user option #15
(page 18) must be set to allow microwave only mode. The oven
default does not have the MICROWAVE ONLY feature activated.
When user option MICROWAVE ONLY is on, the MICROWAVE
ONLY icon appears in the bottom right corner of the display.
To cook a preprogrammed microwave only item follow these
steps:
1.Press the Enter keypad.
2. Use Scroll Up and Scroll Down keypad to select
desired item from the program menu or press the item number
pad.
3. Place food in oven.
4. Press start keypad to begin cooking.
5. At end of cooking cycle, oven beeps and displays animation
below:
6. Remove food from oven.
ADDING MICROWAVE ONLY MENU ITEMS
1. Press the Enter keypad.
2. Press the Program keypad.
3. Press the Enter keypad.
4. Use Scroll Up and Scroll Down keypad to select
location for new item.
5. Press the Program keypad.
6. Enter name for category or item using keypad digits for
letters, numbers and symbols. [For example: Press Keypad
“2” three times for letter “c”]
When the correct letter is displayed, wait until cursor moves to
the next space. If a correction is necessary, press back
to erase one character at a time.
Microwave cooking uses high frequency
energy waves to heat food. When cooking,
microwave energy causes food molecules
to move rapidly. This rapid movement
between the food molecules creates heat,
which cooks the food.
MICROWAVE COOKING
WHAT IS STAGE COOKING?
Stage cooking enables several different
cooking cycles, or stages, to be used
consecutively without repeated input from
the user. Stage cooking can be set to
defrost food initially, then cook it, and then
keep the food warm until serving time. The
total cooking time for all combined stages
cannot exceed 100 minutes.
Microwave Only Icon
.
_ , & , / , 0
7. Press the Enter keypad to save name.
8. Enter Time using number keypads.
9. Use Scroll Down keypad to select microwave
percentage.
10. Enter microwave percentage using number keypads.
11. Use Scroll Down keypad to select stage 2-4 if more
than one cooking stage is necessary.
12. Repeat steps 6-8 if more than one cooking stage is
required.
13. Press Enter to save item.
14. Press Back keypad to exit program mode.
16
AXP / MXP Care and Cleaning
Care and Cleaning
Daily Cleaning Recommendations: Follow the recommendations below for proper maintenance of the AXP/MXP oven.
Please note: The use of caustic cleaning products or those containing ammonia, phosphates, chlorine, sodium or potassium
hydroxide (lye) can damage critical oven parts. Do not use water pressure type cleaning systems. Use of unapproved cleaning
agents will void the terms of the warranty.
Recommended Cleaning Supplies: damp towel, plastic scouring pad, ACP Oven Cleaner (Item CL10) and ACP Oven Shield
Oven Protectant (Item SH10).
Wear protective gloves and protective glasses when cleaning the oven.
To prevent burns, handle utensils, accessories, and door with care.
Allow oven, utensils, and accessories to cool before cleaning.
Oven, utensils, and accessories become hot during operation.
WARNING
I. For a new oven, before using it the first time:
When oven is clean, spray damp towel with ACP Oven Shield (SH10) and wipe all interior surfaces. Do not remove Oven
shield. Turn oven on and pre-heat to start cooking.
II. DAILY CLEANING
2. Remove rack, pizza
stone, and other
accessories from the cavity
when it’s cooled
3. Lift Bottom Element
If element is warm, use
insulated gloves, oven mitt or
tongs to lift the element.
Remove baked on particles
using a scraper.
4. Spray Oven Interior
Wear rubber gloves and
safety glasses. Spray
oven door, sides and
floor with ACP Oven
Cleaner (CL10). Avoid spraying
into perforations. Allow
cleaner to soak for 2 minutes.
5. Clean Oven Interior
5A. Clean the oven door and
interior using a plastic scouring
pad on metal portions of oven.
White ceramic covers on the both
sides of the oven turn to a yellow
tan color after usage. Gently
clean the ceramic covers and red
sealant, apply only gentle
pressure while cleaning. If
needed, repeat steps 4 and 5.
5B. Clean perforated area with
damp towel sprayed with cleaner.
6. Wipe Oven Interior
Using a damp clean towel, wipe
the oven interior, rinse towel and
wring dry, repeat 2-3 times to
remove remaining oven cleaner
and particles from the oven.
7. Spray Oven Shield
When oven is clean, spray a thin
layer of ACP Oven Shield (CL10) on all
interior surfaces. Place rack back
in oven.
Do not remove Oven Shield.
8. Clean Oven Exterior
Clean exterior door and other
surfaces with a clean cloth,
sponge or nylon pad using a mild
detergent and warm water
solution.
1. Shut oven off by
pressing ON / OFF button.
Open the door for cooling.
The fan will run for a few
minutes to cool the oven
interior faster. Let the oven
interior reach room
temperature before
cleaning.
Note: To accelerate cool
down time of oven put a tray
filled with ice in oven cavity.
after shutting oven down.
17
III. WEEKLY CLEANING
1. Clean Air Filter
Remove the air filters located on each
side of the oven at the base.
Wash filter in a mild detergent solution
made with warm water.
Rinse and dry thoroughly.
Replace filters by sliding back into the
side locations.
Clean oven daily.
Use non-caustic cleaner.
Remove food from oven at end of cycle.
Use only accessories that are both high temperature oven-safe and microwave-safe.
Wash rack with warm, soapy water and air dry.
Clean pizza stone by using a plastic scraper to remove baked on particles.
DO NOT:
DO NOT use caustic cleaning products or those containing ammonia, phosphates, chlorine,
sodium or potassium hydroxide (lye).
DO NOT use a water-pressure type cleaning system.
DO NOT cook foods with plastic wrap on them.
DO NOT use abrasive scouring pads to clean ceramic side covers and the red sealant
surrounding each cover.
DO NOT wash or immerse pizza stone.
DO NOT operate oven without a load (empty) in microwave mode.
Any chemical questions please refer to Chemco's MSDS' for ACP Oven Cleaner and ACP
Oven Shield Protectant or contact ACP, Inc. ComServ Customer Service.
email: [email protected]
Best Practices:
Sides of metal cookware should be no more than 1 1/2" (3.8 cm) tall.
Place cookware in center of oven rack, not touching oven sides.
AXP / MXP Care and Cleaning
Attention: Included with the oven is
a “Best Practices” cleaning poster.
Please display the cleaning poster
in a prominent location close to the
oven.
18
User Options
There are several options you can change to customize the operation of the oven for your business. The table below shows
these options; the factory setting is shown in bold type.
1. Oven must be off. To turn oven off, press ON/OFF keypad.
2. Press and hold “2” keypad until option screen appears.
3. Choose option by pressing Enter keypad then use Scroll Up and Scroll Down keypad to select option to highlight
desired option.
4. Press Start keypad to save and press Stop / Reset to exit options mode.
5. Option 6, if “Password Needed” is highlighted press Program keypad to view or edit password.
CLEAN FILTER
When this message displays, clean the
air lter thoroughly. Cleaning the air
lter will not shut off the message.
The message will automatically stop
displaying after 24 hours.
Depending on microwave use and
environmental conditions, the lter
may need to be cleaned more or
less frequently. Once the frequency
is determined, set the option for the
appropriate time frame.
Air lter and vents must be cleaned
regularly to prevent overheating of the
oven. Refer to Owner’s Manual for
complete cleaning instructions.
Air Filters
On Sides
CLEAN
FILTERS
Note: Refer to page 3 for Data Transfer
instructions (Option 17)
Options# Setting Name Options
01 Digit Entry Single digit entry
Double digit entry
02 Text Case Caps
Lower case
Mixed
03 Menu Setting 01=10 Items
02 =100 Items
03 = 360 items
04 (Manual) Cook Manual cooking allowed
Manual cooking not allowed
05 (Manual) Save Save after manual cook
Do not save after manual cook
06 Program Password Password needed
Changes to programs allowed
07 Door Reset Opening door resets timer
Opening door pauses cook cycle
08 Keyboard Activation Off
30 Seconds
60 Seconds
120 Seconds
09 Keybeep On
Off
10 Keybeep Volume Low
Medium
High
11 End Of Cycle Beep Three beeps once
Three beeps repeating
Continuous until door is opened
12 Preheat Warning Warn if oven not at temp
Off
13 Temperature Scale Temperatures are displayed in °F for 60Hz
models
Temperatures are displayed in °C for 50Hz
models
14 Clean Filter Reminder Off
Displays every 7 days
Displays every 30 days
Displays every 90 days
15 (Microwave) Only Allow microwave only mode
No microwave only mode
16 Auto Off Disable
2 Hours
4 Hours
8 Hours
17 Data Transfer Begin Transfer: Card to Oven. Press Program
Keypad
Begin Transfer: Oven to Card. Press Program
Keypad
19
To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time.
Only an authorized servicer should remove outer case.
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Problem
Possible Cause
Oven does not operate
Confirm oven is plugged in.
Confirm oven is connected to a grounded circuit.
Check fuse or breaker.
Oven operates intermittently
Check air filters and discharge air vents
If oven does not accept entries
when pad is pressed
Make sure oven is preheated. Open and close
door, press pad again.
Oven fan turns on while oven
is not preheating or cooking
Normal operation
When I turn the oven OFF, the
display is still lit.
Normal operation
Clean Filter displays
This is normal and will appear for 24 hours.
Frozen oven display Oven display needs to reset.
Unplug oven. Wait 5 seconds. Plug back in.
Before Calling for Service
2012 ACP, Inc.
Part No. 20001305
Revised 9/12
For full product documentation visit:
www.acpsolutions.com
/
