SnapStone 11-002-01-01 User manual

SnapStone Porcelain Tile Care & Maintenance

With proper care and maintenance, your SnapStone

tile floor is made to be highly

durable and long-lasting. Porcelain tile is naturally stain, scratch and moisture resistant.

AFTER INSTALLATION

After installation you may resume light traffic on the floor after 24 hours. Normal traffic

can resume after 72 hours.

REGULAR CLEANING

 Avoid using cleaning chemicals on your floor for one week after installation.

 DO NOT USE commercial enzyme-based cleaners, vinegar or steam mops.

 Regular sweeping or vacuuming and damp mopping is recommended to keep your

floor looking its best.

 For deep cleaning, or to address messy or sticky spills, use a detergent cleaner

designed for porcelain. Avoid cleaning products that contain wax or paraffin.

GROUT CARE

Snapstone Flexible Grout is self-sealing but will still require periodic cleaning; especially

in high-traffic areas. A cleaner such as SoftScrub® with Bleach and a soft-bristled brush

should remove any accumulated dirt. Cleaning your grout lines monthly or quarterly will

make it easier to maintain.

For more on care & maintenance, please visit www.snapstone.com