Nu-Vu Food Service System PRO-16 Datasheet

Brand
Nu-Vu Food Service System
Model
PRO-16
Type
Datasheet

Nu-Vu Food Service System PRO-16 is a floor model proofer with a stainless steel exterior and tempered glass doors for a full view of your product. A manual fill water pan located at the bottom of the unit provides humidity, while the fan provides uniform distribution of heat and humidity. The PRO-16 has a capacity of 16 full-size pans and 32 half-size pans. It is NSF & C-ETL-US listed. The PRO-16 has a welded stainless steel exterior, aluminum interior, and is fully insulated. The control panel is accessible through the front and top of the unit.

Nu-Vu Food Service System PRO-16 is a floor model proofer with a stainless steel exterior and tempered glass doors for a full view of your product. A manual fill water pan located at the bottom of the unit provides humidity, while the fan provides uniform distribution of heat and humidity. The PRO-16 has a capacity of 16 full-size pans and 32 half-size pans. It is NSF & C-ETL-US listed. The PRO-16 has a welded stainless steel exterior, aluminum interior, and is fully insulated. The control panel is accessible through the front and top of the unit.

Food Service Systems
NU-VU
®
Proofer
®
Project
Item
Quantity
®
NU-VU
®
Food Service Systems
www.nu-vu.com
5600 13th Street
Menominee, MI 49858
1-800-338-9886 Toll Free
1-906-863-4401 Phone
1-906-863-5889 Fax
PRO-16 Floor Model Proofer
NU-VU
®
PRO-16 Floor Model Proofer
STANDARD FEATURES:
• Stainless steel exterior
• Aluminum interior
• Heavy duty 3” casters
• Full view tempered glass door
• Silicone rubber door gaskets
• Manual fill water pan
OPTIONAL FEATURES:
• Warmer
• Set of 6” legs
SIZE:
PRO-16 - 74-
1
/16” High, 24-
5
/16” Wide, 33-
3
/4” Deep
1932 mm High, 618 mm Wide, 857 mm Deep
NU-VU’s PRO-16 Floor model proofer has a
stainless steel exterior and tempered glass doors
for full view of your product. A manual fill water pan
located at the bottom of the unit provides the
humidity, while the fan provides uniform distribution
of heat and humidity.
The PRO-16 has a capacity of 16 full size pans and
32 half-size pans.
CONSTRUCTION:
• Welded stainless steel exterior
• Aluminum interior
• Fully insulated
• Control panel accessible through front
and top of unit
• Heating elements accessible inside of cabinet,
and through bottom
CONTROLS:
• Mechanical controls
• Indicator light for thermostat
• Separate heat and humidity controls
LABORATORY CERTIFICATION AND APPROVAL
®
NU-VU
®
Food Service Systems
www.nu-vu.com
5600 13th Street
Menominee, MI 49858
1-800-338-9886 Toll Free
1-906-863-4401 Phone
1-906-863-5889 Fax
®
Food Service Systems
Approval / Stamp
PRO-16 Floor Model Proofer
NU-VU
®
PRO-16 Floor Model Proofer
SPECIFICATIONS:
ELECTRICAL:
SERVICE CONNECTIONS:
• Unit is shipped from factory to be hard wired on site.
Single phase uses four-wire system.
• 208 or 240-Volt single phase is standard.
Please specify at time of order.
INSTALLATION:
Allow four inches on each side and back of unit for
ventilation of oven.
DOOR SWING: Proofer - 23-
7
/8” (606 mm)
PACKING SIZE:
87” High, 40” Wide, 33” Deep
(2210 mm High, 1016 mm Wide, 838 mm Deep)
SHIPPING WEIGHT:
350 Pounds (159 Kg), FOB Menominee, MI 49858
DIMENSIONS:
Height Width Depth
Exterior 74-
1
/16” 24-
5
/16” 33-
3
/4”
Interior
57-
3
/8” 18-
3
/8” 28-
7
/8”
Amp Draw 208/1 208/3 240/1 240/3
19 n/a 19 n/a
ELECTRICAL:
CAPACITY:
18”x26” 13”x18”
Sheet Pans Sheet Pans Spacing
Proofer 16 32 3-
5
/
16
”
74
1
/
16
”
24
5
/
16
”
69
1
/
8
”
32
3
/
8
”
33
3
/
4
”
FRONT SIDE BACK
NEMA 5-20 P CORD ATTACHED
MANUAL
RESET FUSE
LISTINGS:
The PRO-16 has NSF & C-ETL-US listings.
  • Page 1 1
  • Page 2 2

Nu-Vu Food Service System PRO-16 Datasheet

Brand
Nu-Vu Food Service System
Model
PRO-16
Type
Datasheet

Nu-Vu Food Service System PRO-16 is a floor model proofer with a stainless steel exterior and tempered glass doors for a full view of your product. A manual fill water pan located at the bottom of the unit provides humidity, while the fan provides uniform distribution of heat and humidity. The PRO-16 has a capacity of 16 full-size pans and 32 half-size pans. It is NSF & C-ETL-US listed. The PRO-16 has a welded stainless steel exterior, aluminum interior, and is fully insulated. The control panel is accessible through the front and top of the unit.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents