Eagle Group BS14-24 Datasheet

Type
Datasheet

This manual is also suitable for

Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG40.24 Rev. 10/08
Catalog Specification Sheet No.
EG40.24
Spec-Bar 2000
®
Blender Stations with T&S Faucet
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 Fax: 302-653-2065
www.eaglegrp.com
Short Form Specifications
Eagle Spec-Bar 2000
®
Blender Station, model
_____________. Heavy gauge type 304 stainless steel body,
legs, leg channels and cross rails. Stainless steel sink with lift
out perforated strainer and T&S deck mounted gooseneck
faucet. Stainless steel blender shelf with rear cord access hole.
Stainless steel adjustable bullet feet.
Design and Construction Features
Designed to align with the single speed rail on adjoining
equipment.
Body, legs and adjustable crossbracing constructed of type
304 stainless steel for strength and corrosion resistance.
1
5
8˝ (41mm)-diameter type 304 stainless steel legs
with stainless steel bullet feet; stainless steel gussets,
and stainless steel 1
1
4˝ (32mm)-diameter adjustable
crossbracing.
All units feature sink bowl with hot and cold water T&S
gooseneck faucet.
Faucets are on (102mm) centers with
1
2˝ (13mm) NPT
inlet, hot and cold water connections required.
Sink bowl on all units is 9
1
4˝ x 11
1
2˝ x (235 x 292 x
152mm) except #BS14-19, which features 9
5
8˝ x 9
5
8˝ x
(245 x 245 x 152mm) sink bowl.
Lift-out stainless steel perforated sink strainer.
Stainless steel 10˝ (254mm)-deep blender shelf
—9˝ (229mm) deep on 14˝ (356mm) long models—
with rear cord access hole.
1
1
2˝ (38mm) I.P.S. threaded drain with nut and washer.
Full-length (203mm)-high backsplash.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Spec-Bar 2000
®
Blender Stations
with T&S Faucet
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
Phone: 302-653-3000 Fax: 302-653-3091 • e-mail: [email protected]
MODELS:
BS14-19
BS18-19
BS14-24
BS18-24
Certifications / Approvals
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
EG40.24
Item No.:
Project No.:
S.I.S. No.:
Rev. 10/08
Printed in U.S.A.
©2008 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 Fax: 302-653-2065
www.eaglegrp.com
Spec-Bar 2000
®
Blender Stations with T&S Faucet
Spec-Bar 2000
®
Blender Stations with T&S Faucet
width x length* weight
in. mm lbs. kg
19˝ x 14˝ 483 x 356 42 19.1
width x length* weight
in. mm lbs. kg
19˝ x 18˝ 483 x 457 55 24.9
Model #BS14-19 Model #BS18-19
width x length* weight
in. mm lbs. kg
24˝ x 14˝ 610 x 356 47 21.3
width x length* weight
in. mm lbs. kg
24˝ x 18˝ 610 x 457 65 29.5
Model #BS14-24 Model #BS18-24
*Dimensions in chart do not include (127mm)
additional width to align with equipment with
single speed rail.
*Dimensions in chart do not include 5˝ (127mm)
additional width to align with equipment with
single speed rail.
*Dimensions in chart do not include 5˝ (127mm)
additional width to align with equipment with
single speed rail.
*Dimensions in chart do not include 5˝ (127mm)
additional width to align with equipment with
single speed rail.
Blender Stations to use with 19˝ (483mm) wide equipment:
FRONT VIEW SIDE VIEW FRONT VIEW
TOP VIEW TOP VIEW
SIDE VIEW
FRONT VIEW SIDE VIEW
TOP VIEW
FRONT VIEW SIDE VIEW
TOP VIEW
Blender Stations to use with 24˝ (610mm) wide equipment:
  • Page 1 1
  • Page 2 2

Eagle Group BS14-24 Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI