Silver King SK18MAJ User manual

Type
User manual

This manual is also suitable for

Silver King SK18MAJ is a bulk milk dispenser designed to provide cold, fresh milk for a variety of applications. With its stainless steel exterior and interior, the SK18MAJ is easy to clean and maintain, making it ideal for use in commercial kitchens, schools, hospitals, and other high-traffic environments.

The SK18MAJ has a capacity of 18 gallons, making it perfect for dispensing large volumes of milk. The unit features a temperature control knob that allows you to adjust the temperature of the milk to your desired setting. The SK18MAJ also comes with a built-in drip tray to catch any spills, keeping your countertops clean.

Silver King SK18MAJ is a bulk milk dispenser designed to provide cold, fresh milk for a variety of applications. With its stainless steel exterior and interior, the SK18MAJ is easy to clean and maintain, making it ideal for use in commercial kitchens, schools, hospitals, and other high-traffic environments.

The SK18MAJ has a capacity of 18 gallons, making it perfect for dispensing large volumes of milk. The unit features a temperature control knob that allows you to adjust the temperature of the milk to your desired setting. The SK18MAJ also comes with a built-in drip tray to catch any spills, keeping your countertops clean.

1
Specifications Subject to Change Without Notice.
1600 Xenium Lane North, Minneapolis, MN 55441-3787
Phone (763) 923-2441
Technical Manual
and
Replacement Parts List
Majestic Milk
Dispenser
s
MODEL SK18MAJ
1
TECHNICAL MANUAL
MAJESTIC SERIES BULK MILK DISPENSERS
Thank you for purchasing Silver King food service equipment. Our goal is to provide our customers with the most reliable
equipment in the industry today. Please read this manual and the accompanying warranty information before operating your new
Silver King unit. Be sure to complete and mail the warranty card within 10 days of purchase to validate your warranty.
Upon delivery of your new Silver King unit, inspect the carton and unit for shipping damages. Report any damage immediately to
the transportation carrier and file a written freight damage claim to protect your investment. If a claim is to be filed, save all
packaging materials.
INSTALLATION
The stainless steel exterior of the cabinet has been protected by a plastic covering during manufacturing and shipping. This
covering can be readily peeled before installation. After removing this covering, wash the interior and exterior surfaces using a
warm mild soapy water solution and a sponge or cloth, rinse with clean water and wipe dry.
Drip Tray:
Follow the instructions supplied with the drip tray for mounting it to the unit.
Location:
When locating your new milk dispenser, convenience and accessibility are important considerations, but the following factors must
be observed:
When placing the unit on a counter, the counter must be able to support a minimum of 300 pounds.
When wall mounting the unit, follow the instructions supplied with the wall mounting kit.
When placed on a counter, the unit must be on the legs supplied and secured to the counter with the Hold Down Brackets
supplied. If the legs are not installed the unit will not operate properly and the warranty will be void.
There must be at least four (4) inches of clear space above the unit, two (2) inches on each side and back and open in
front.
At no time should anything be stored or placed on top of the unit.
Correct serving height is important so that those using the dispenser can operate the dispenser properly.
The unit must be level. The feet on the front legs are adjustable to aid in leveling the unit.
Avoid placing the unit next to an oven, heating element or hot air source which would adversely affect the performance of
the unit.
Electrical Connections:
Be sure to check the data plate, located on the liner of the cabinet, for required voltage prior to connecting the unit to power. The
specifications on the data plate supersede any future discussion.
The standard dispenser is equipped with a seven (7) foot power cord that requires a 115 Volt, 60 Cycle, 1 Phase properly grounded
electrical receptacle. The power cord comes with a 3 prong plug for grounding purposes. Any attempt to cut off the grounding
spike or to connect to an ungrounded adapter plug will void the warranty, terminate the manufacturers responsibility and could result
in serious injury.
The circuit must be protected with a 15 or 20 ampere fuse or breaker.
2
OPERATION
Initial startup:
After satisfying the installation requirements, the milk dispenser is ready to start. The unit will start when the power cord is
connected to a live electrical receptacle. If the compressor is not running when the unit is initially plugged in, check to make sure
that the Temperature Control is not set to the ‘off’ position. Allow the unit to run a minimum of two hours before loading it with
product.
Preparation For Use:
Once the unit has achieved proper operating temperature, observe the procedures noted in the label on the door liner for loading
milk into the milk dispenser. When removing an empty milk krate, be sure to raise the valve arm fully before pulling the milk tube
out of the valve. The last half inch of upward valve travel will lock the valve jaw in place and prevent it from coming out of the valve.
Temperature Control:
The Temperature Control, located on the front of the unit behind the valve splash guard (see label on door liner), is factory set at the
midpoint position, which will maintain an average product temperature of around 36 - 38 Deg F. To access the temperature control,
follow the instructions on the door liner. To obtain cooler temperatures turn the Temperature Control stem clockwise and vise versa
with a flat blade screwdriver. Allow the unit a minimum of six (6) hours to respond to a control setting adjustment if the product is in
the cabinet.
Temperature Indicator:
The Temperature Indicator, mounted on the door, is factory set to indicate the temperature of the product within two (2) degrees.
Should the Temperature Indicator read inaccurately there are instructions for recalibrating it located on the door liner.
Defrost:
The Silver King Majestic milk dispenser is a manual defrost unit. The unit should be defrosted whenever the walls accumulate a
frost bank that is 1/2 inch thick. To defrost the unit, either turn the Temperature Control knob to the ‘off’ position or disconnect the
power cord from the electrical receptacle, and open the door. After the frost has melted or come loose from the cabinet walls, wipe
out the cabinet interior. Do not attempt to scrape or chisel off the frost as you could do irreparable damage to the unit.
Mixers (Optional Equipment/Factory Installed):
The optional malt mixers for the Silver King Majestic milk dispensers have 3 speeds. The speed is adjusted by the 3 position knob
on the top of the mixer. To operate the mixer put a mixer cup with product in it under the mixer shaft and raise it until the lip of the
cup engages the cup guide on the mixer. The mixer shaft and impeller will spin when the cup guide is raised.
MAINTENANCE
Preventative maintenance is minimal although these few steps are very important to continued operation and maximizing the life of
the appliance.
Cabinet Surfaces:
The cabinet interior and exterior are stainless steel and should be cleaned periodically with a solution of warm water and a mild
soap, rinsed and wiped dry with a clean soft cloth. A stainless steel cleaner can also be used. Should a surface become stained or
discolored, do not attempt to clean with an abrasive cleaner or scouring pad. Use a soft cleaner and rub with the grain of the metal
to avoid scratching the surface. Do not use chlorinated cleaners.
Valves:
To clean the valve start by removing the bottom valve body cap (item 32) by prying it down and off. Remove the valve jaw (item 33)
by pushing up through the bottom of the valve and pulling it out the top of the valve. Clean all loose parts and the valve (in place)
with a solution of warm water and mild soap or a sanitizing solution and rinsing afterwards. Replace the valve jaw by sliding it into
the valve from above and pressing down on the valve jaw until it ‘snaps’ firmly onto the valve push rod. Replace the bottom valve
body cap.
Leaking Valves:
To stop a valve from dripping milk start by removing the splash guard (item 10) by hand and the apron (item 12) with a Phillips
screwdriver. Locate and loosen the adjustment nut and bolt shown in the valve cross section on page 3. Remove the milk tube
from the valve. Raise and drop the valve arm (item 34) several times until the valve jaw (item 33) is tight to the front of the valve
opening when the valve arm is fully lowered. Re tighten the adjustment nut and bolt and replace the apron and splash guard. Also
make sure that the milk tube is cut as close as possible to the valve.
MODEL SERIAL NO. DATE INSTALLED
10
WHEN ORDERING REPLACEMENT PARTS, PLEASE PROVIDE MODEL AND SERIAL NUMBERS
11
FORM NO. 25982 REV B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Silver King SK18MAJ User manual

Type
User manual
This manual is also suitable for

Silver King SK18MAJ is a bulk milk dispenser designed to provide cold, fresh milk for a variety of applications. With its stainless steel exterior and interior, the SK18MAJ is easy to clean and maintain, making it ideal for use in commercial kitchens, schools, hospitals, and other high-traffic environments.

The SK18MAJ has a capacity of 18 gallons, making it perfect for dispensing large volumes of milk. The unit features a temperature control knob that allows you to adjust the temperature of the milk to your desired setting. The SK18MAJ also comes with a built-in drip tray to catch any spills, keeping your countertops clean.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI