MINOURA MAG-850 User manual

Brand: MINOURA

Model: MAG-850

Type: User manual

MINOURA MAG-850 is a reliable and sturdy indoor bicycle trainer that can offer 7 different levels of load force, replicating actual riding resistance. It features a Dial Mag resistance unit and a remote Mag resistance unit, both with a white lever for adjusting the load force, allowing you to customize your workout intensity. The trainer also includes a hub handle for easily securing your bike, a flywheel cover for safety, and rubber caps for added stability.

RESOLUTION DIAGRAM

MAG-850 indoor bicycle trainer

coupling (R)

coupling cover

(move side)

hub

handle

leg rubber

cap

frame rubber cap

main frame

flywheel cover

flywheel

flywheel side

inner case

drive roller

connecting plate

mount plate

mag side inner case

alloy rotor

outer

cover

foot pedal

400-4511-00 : Dial Mag resistance unit 400-4503-00 : Mag side inner case

400-4502-00 : Dial outer cover 400-4504-00 : Flywheel side inner case

400-4611-00 : Remote Mag resistance unit 400-4505-00 : Flywheel cover

400-4602-00 : Remote outer cover 400-4506-00 : Drive roller

400-4604-00 : Hub handle 400-4605-00 : Frame rubber cap

400-1243-00 : Coupling (right side) 400-4606-00 : Leg rubber cap

400-4509-00 : Foot pedal 400-4607-00 : Coupling cover (move side)

400-4608-00 : Coupling cover (fix side)

WARRANTY PARTS

coupling cover

(fix side)

Remove the coupling protector cap when you use your own quick releaseRemove the coupling protector cap when you use your own quick release

Remove the coupling protector cap when you use your own quick release

skewer.skewer.

skewer.

WARNINGS

Use two-wheeled bicycles only. Tandems may be used if balanced correctly.Use two-wheeled bicycles only. Tandems may be used if balanced correctly.

Use two-wheeled bicycles only. Tandems may be used if balanced correctly.

Remove all oils and moisture from the drive roller and the tire before use.Remove all oils and moisture from the drive roller and the tire before use.

Remove all oils and moisture from the drive roller and the tire before use.

Keep both hands on handlebars at all times and maintain a normal ridingKeep both hands on handlebars at all times and maintain a normal riding

Keep both hands on handlebars at all times and maintain a normal riding

position.position.

position.

Check the couplings supporting the rear hub for damageCheck the couplings supporting the rear hub for damage

Check the couplings supporting the rear hub for damage

and cracks. Accidents may occur from cracked or dam-and cracks. Accidents may occur from cracked or dam-

and cracks. Accidents may occur from cracked or dam-

aged couplings.aged couplings.

aged couplings.

When using the trainer, place it on a flat surface for safe training.When using the trainer, place it on a flat surface for safe training.

When using the trainer, place it on a flat surface for safe training.

Do not over tighten the hub-clamp handles. Over-tightening may causeDo not over tighten the hub-clamp handles. Over-tightening may cause

Do not over tighten the hub-clamp handles. Over-tightening may cause

damage to the trainer or bicycle frame. The clamp handles should be a snugdamage to the trainer or bicycle frame. The clamp handles should be a snug

damage to the trainer or bicycle frame. The clamp handles should be a snug

and secure fit. Do not force!and secure fit. Do not force!

and secure fit. Do not force!

Keep away from small children, and keep hands and feet away from spin-Keep away from small children, and keep hands and feet away from spin-

Keep away from small children, and keep hands and feet away from spin-

ning rollers and wheels at all times.ning rollers and wheels at all times.

ning rollers and wheels at all times.

Before use, make sure all bolts and nuts are securely fastened.Before use, make sure all bolts and nuts are securely fastened.

Before use, make sure all bolts and nuts are securely fastened.

• Read all instructions including the back page of the POP card board care-• Read all instructions including the back page of the POP card board care-

• Read all instructions including the back page of the POP card board care-

fully before use.fully before use.

fully before use.

• Some assembly required.• Some assembly required.

• Some assembly required.

• Keep the manual handy at all times.• Keep the manual handy at all times.

• Keep the manual handy at all times.

• Do NOT use trainer for any other purpose than instructed.• Do NOT use trainer for any other purpose than instructed.

• Do NOT use trainer for any other purpose than instructed.

• The trainer is manufactured to precise standards. You may not disas-• The trainer is manufactured to precise standards. You may not disas-

• The trainer is manufactured to precise standards. You may not disas-

semble or rebuild it.semble or rebuild it.

semble or rebuild it.

• "Magturbo" is the trademarks of Minoura Co.,Ltd. and may not be copied.• "Magturbo" is the trademarks of Minoura Co.,Ltd. and may not be copied.

• "Magturbo" is the trademarks of Minoura Co.,Ltd. and may not be copied.

IMPORTANT NOTES

Replace your quick release skewer to the supplied one and install the sup-Replace your quick release skewer to the supplied one and install the sup-

Replace your quick release skewer to the supplied one and install the sup-

plied coupling protector cap onto the right side coupling when you use theplied coupling protector cap onto the right side coupling when you use the

plied coupling protector cap onto the right side coupling when you use the

trainer. Otherwise the stability will not be guaranteed.trainer. Otherwise the stability will not be guaranteed.

trainer. Otherwise the stability will not be guaranteed.

Open the legs fully to get maximum stability.Open the legs fully to get maximum stability.

Open the legs fully to get maximum stability.

The Magturbo unit has 7 different levels of load force, replicating actual riding resistance.

The load settings range from high (H) to low (L) and can be adjusted via the white lever on

the Magturbo unit or the lever on the thumb shifter device. The rider may also adjust the

load force by shifting up or down among his gears, depending on the level desired.

We recommend that you start with a medium to low load force and gradually work up, in-

creasing force as muscled warm up.

Decreasing Load ForceDecreasing Load Force

Decreasing Load Force

To decrease the load force, move the white lever on Mag unit

toward the (L) symbol.(see Fig. B)

Be sure the lowest selection is not zero load, there still be a small

level of force.

If your Mag unit is a remote control type, turn the lever on your

thumb shifter device toward the (L) symbol.

(see Fig. C)

Increasing Load ForceIncreasing Load Force

Increasing Load Force

To increase the load force, move the white lever on the Mag unit

toward the (H) symbol. (see Fig. A)

If your Mag unit is a remote control type, turn the lever on your

thumb shifter device toward the (H) symbol.

(see Fig. C)

You must not be riding the trainer when you are adjusting the white leverYou must not be riding the trainer when you are adjusting the white lever

You must not be riding the trainer when you are adjusting the white lever

on the Mag unit for load force. Make sure all parts have stopped spinning.on the Mag unit for load force. Make sure all parts have stopped spinning.

on the Mag unit for load force. Make sure all parts have stopped spinning.

Do not try to adjust the lever with your feet while riding.Do not try to adjust the lever with your feet while riding.

Do not try to adjust the lever with your feet while riding.

USING THE MAGTURBO UNIT

(Fig. A)

(Fig. B)

(Fig. C)

If you cannot shift to either the lowest (L) or the highest (H)

position, it is possible that the inner wire of the remote shifter

cable is too long and the wire tension is loose. If so, please

adjust the tension with the following steps;

1.1.

Set the remote shifter lever at “H” position. Remove the re-

mote shifter device from the handlebar and straighten the cable.

2.2.

Remove the plastic cap located on the bottom of the cable.

(see Fig. E)

3.3.

Hold the adjusting screw with your right hand and push it to-

wards the direction of the outer cable, then adjust the nut with

your left hand to make the wire tension properly.

Trouble Shooting Your Remote Shifter Unit

Wire Tension

Adjusting Screw

Nut Plastic Cap

Cable

(Fig. D)

MINOURA JAPAN HEAD OFFICEMINOURA JAPAN HEAD OFFICE

MINOURA JAPAN HEAD OFFICE

1197-1 Godo, Anpachi, Gifu 503-2305 JAPAN

Phone +81- (0)584-27-3131 / Fax +81- (0)584-27-7505

E-mail: minoura@minoura.jp

http:// www.minoura.jp

MINOURA NORTH AMERICAN CENTERMINOURA NORTH AMERICAN CENTER

MINOURA NORTH AMERICAN CENTER

FOR RESEARCH, DEVELOPMENT & MARKETINGFOR RESEARCH, DEVELOPMENT & MARKETING

FOR RESEARCH, DEVELOPMENT & MARKETING

1996 East Avenue, Hayward, CA 94541-5454 U.S.A.

Phone 510-538-8599 / Fax 510-538-5899

E-mail : MinouraUSA@ATTglobal.net

Made & Quality Controlled in Japan

FOR MORE INFORMATION

MINOURA MAG-850 User manual

MINOURA MAG-850 User manual

MINOURA MAG-850 User manual

Related papers

Other documents