Diamondback Fitness 1260sc Rear Wheel Studio Cycle Owner's manual

Power on the console

1260Sc Bluetooth/ANT+ Setup

Pedal your 1260Sc a couple rotations until the

console beeps and lights up.

Start your compatible app

Open your BLE FTMS (Fitness Machine Service) compatible app on your

iOS or Android device. Get to the point in your app where it is searching

for devices.

Press the ANT+ button

Now, press the blue Bluetooth • ANT+ button on the

1260Sc console. You’ll see ANT+ blinking near the top in the

console display indicating you’re ready for the ﬁnal step.

Special note for ﬁrst time setup:

The ANT+ indicator will blink for 30 seconds.

Devices can only ﬁnd and make a ﬁrst time

connection with the 1260Sc console during

this 30 second blinking period.

Finish the connection

On your iOS or Android device, choose GFIT from the connection choices.

Still have questions? Please contact us.

email : support@diamondbackﬁtness.com

website : http://diamondbackﬁtness.com

This manual is also suitable for

Download PDF