PRODUCT NAME: Eternity
ITEM NUMBER: 39773BCPC
PRODUCTS ARE NOT INENDED
FOR COMMERCIAL USE
MADE IN CHINA
Page 1 of (2)
Warning!This fixture is supplied with an installed
LED driver.These fixtures are dimmable using
standard triac dimmer.For best operation we
recommend using Lutron CL Dimmers.
Please consult your electrician for hanging fixture and wiring.
The fixture is designed to dim with a standard
Triac forward phase dimmer.Dimming levels will
vary by dimmer.
The above belongs in box with recommended
drivers.
Below is a list of recommended dimmers:
Lutron MACL-153M
Lutron DVL-153P
Lutron SCL-153P
Leviton IPL06-10Z
Leviton 6674-POW
Due to inrush current wattage should not
exceed 150 watts of product a 600 watt
dimmer.
L
I
G
H T I N
G
3*5W LED
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
1.)
2.)
Step.2:
Wire fixture to wires in outlet box. Green
wire is for Ground.
Step.1:
Remove mounting bracket (A) from
fixture and install to electrical box.
Step.3:
Screw finials (C) onto mounting bracket (A)
until canopy is flush with ceiling.Adjust wire to
desired mounting height.
3.)
(C)
Finial
(B)
Canopy
(A)
Mounting Bracket
A
B
C
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Halo SLD612940WH User guide
-
Halo SMD6S6940WH User guide
-
Lithonia Lighting MNLK L48 830 M4 Installation guide
-
Hampton Bay HB1232LED-35 Operating instructions
-
Hampton Bay HBL1143A-06 Operating instructions
-
Acuity Brands DFMDECL 14 M4 User manual
-
EnviroLite EV407941BZ30 Installation guide
-
Westinghouse 6372200 Installation guide
-
Hampton Bay HB2112LED-237 Operating instructions
-
Halo RL460WH950 Installation guide
