TCL LED65E5700UDS Operating instructions

TCL
Brand
TCL
Model
LED65E5700UDS
Category
LCD TVs
Type
Operating instructions

This manual is also suitable for

刘莹
制作表编号：HZ2014-12-016R
物 料 编 号：72-RT95HB-EAPAA
内 容：说明书
型 号：L55E5700UDS
日 期：2014-12-9
BOM H7-55E57CY-IRNC0AA编 号 ：
牌子名称： LED55E5700UDSTCL
批 次 号：OLK117942B
机 芯：RT95H-AP
制 作 人
PREPARED BY：
项目 美工 工程师/
EN G. C H EC KE D BY:
市场业务中心确认
C O N F IR M BY：
i)
ii)
iii)
(SCALE)
(SIZE)
(COLOUR)
:
:
:
非1:1
B5
白底黑字， 哑粉纸；80g
TCL多媒体科技控股有限公司
运营中心 - 制造中心 - 一厂TV
TV工 程 部 产 品 辅 助 设 计 室(外 销)
销 往 地： IRAN
Figures and illustrations in this User’s Guide are
provided for reference only and may dier from
actual product appearance. Product design and
specications may be changed without notice.
OPERATION MANUAL
LED55E5700UDS/LED55E6700UDS
3D SMART TV
2
Table of Contents
Chapter 1: Introduction ......................................................................................................3
Precautions ........................................................................................................................................3
Product ..............................................................................................................................................3
Power and Plug .................................................................................................................................3
Power Cord and Signal Cable ...........................................................................................................3
Use Environment ...............................................................................................................................3
Cleaning ............................................................................................................................................3
Hanging the TV Set on the Wall ........................................................................................................3
Important Information ........................................................................................................................3
Buttons on the TV ..............................................................................................................................4
Sockets ...............................................................................................................................................4
Remote Control Functions ................................................................................................................6
Chapter 2: General Operation ...........................................................................................7
Switching on .......................................................................................................................................7
Switching off ......................................................................................................................................7
Channel Scan .....................................................................................................................................8
Network Connection .........................................................................................................................8
Network Settings ................................................................................................................................9
Chapter 3: Menu Operation .............................................................................................10
Menu Display ....................................................................................................................................10
Using Home Menu ........................................................................................................................... 11
Recommendation ............................................................................................................................11
Entertainments ................................................................................................................................11
Utility ................................................................................................................................................12
Custom Fields .................................................................................................................................12
Using Left Home Menu ....................................................................................................................12
Source .............................................................................................................................................12
Media ...............................................................................................................................................12
Settings ...........................................................................................................................................12
Message Box ...................................................................................................................................13
Using TV Menu .................................................................................................................................13
Smart TV IME ....................................................................................................................................14
Special Function ..............................................................................................................................14
Viewing TV Using the 3D Function ..................................................................................................14
PVR (Personal Video Recorder) .....................................................................................................15
Chapter 4: Other Information ..........................................................................................16
Problems & Solutions .....................................................................................................................16
Troubleshooting ...............................................................................................................................17
3
Chapter 1 Introduction
Precautions
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Product
• Do not block or cover the ventilation openings on
the back cover.
• Do not push objects of any kind into this unit through
the cabinet slots as they could touch the current
carryingpartsorshort-circuitparts,resultinginre,
electric shock, or damage to the unit.
• Do not attempt to open the cabinet as this may
cause damage. There are no parts inside you can
servicebyyourself.Referallservicingtoqualied
personnel.
• Donottouchthescreensurfacewithngersasthis
may scratch or mar the TV screen.
• Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
Power and Plug
• Unplug the set under the following conditions:
- If the set will not be used for a long period of time.
- If the power cord or the power outlet/plug is
damaged.
- Follow the instructions to install and adjust the
product. Adjust those controls that are covered
in these operating instructions as improper
adjustment of other controls may result in damage.
If this happens, unplug the set and refer to the
service personnel.
- If the set is subject to impact or has been dropped
and the cabinet has been damaged.
• Where the mains plug or an appliance coupler is
used as disconnect device, the disconnect device
shall remain readily operable.
(*Where an all-pole mains switch is used as the
disconnect device, the switch shall remain readily
operable.)
Power Cord and Signal Cable
• Do not allow anything to rest on or roll over the
power cord and the signal cable.
• Protect the power cord and the signal cable from
being trampled.
• Do not overload the power cord or the power outlet.
• Do not expose the power cord and the signal cable
to moisture.
Use Environment
• Do not place the set on an unstable cart, stand, or
table.
• Place the set on a place that allows good ventilation.
• Do not use the set near damp, and cold areas.
Protect the set from overheating.
• Keep the set away from direct sunlight.
• Apparatus shall not be exposed to dripping or
splashingandnoobjectslledwithliquids,suchas
vases, shall be placed on the apparatus.
• Do not use the set near dust place.
• Operating Temperature: 5°C
to 35°C (41°F to 95°F)
Operating Humidity: 20% to 80%, non-condensing
Storage Temperature: -15°C to 45°C (5°F to 113°F)
Storage Humidity: 10% to 90%, non-condensing
Cleaning
• Dust the set by wiping the screen and the cabinet
with a soft, clean cloth or some special liquid cleaner.
• Do not apply excessive force to the screen when
cleaning.
• Do not use water or other chemical cleaner to clean
the screen as this may damage the surface of the TV
screen.
Hanging the TV Set on the Wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following
safety notes:
• Check that the wall can support the weight of the TV
set and wall mount assembly.
• Follow the mounting instructions provided with the
wall mount.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the
material of the wall.
• Make sure that the TV set cables are placed so that
there is no danger of tripping over them.
All other safety instructions about our TV sets are also
applicable here.
Important Information
Ifatelevisionisnotpositionedinasufcientlystable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided
by taking simple precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television.
• Only using furniture that can safely support the
television.
• Ensuring the television is not overhanging the edge
of the supporting furniture.
• Not placing the television on tall furniture (for
example, cupboards or bookcases) without anchoring
both the furniture and the television to a suitable
support.
• Not standing the television on cloth or other materials
placed between the television and supporting
furniture.
• Educating children about the dangers of climbing on
furniture to reach the television or its controls.
Note: Graphics contained within this publication
are for representation only.
4
Buttons on the TV
1. CH+/- (CHANNEL UP/DOWN) button
Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the
remote and adjusts menu controls.
2. VOL+/- (VOLUME UP/DOWN) button
Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote
and adjust menu controls.
3. HOME (
) button
Return to Home menu or enter certain source from Home menu.
4. OK button
Inthemenusystem,conrmsyourselectionorchangessettings.
5. POWER (
) button
Turns the TV on or into standby. (Note: for some models, the POWER button turns the TV on or off.)
Note:
The location and names of the function buttons and power button on the TV may vary according to TV model, and
not all buttons are available on all models.
Sockets
Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets are
available on all models.
Introduction
LAN
RJ45 plug for connecting to external modem or network access equipment.
SPDIF socket (output)
The SPDIF socket can be used to connect a compatible digital audio receiver.
ANTENNA/CABLE IN socket (input)
This socket can be used to connect the outside aerial or cable network.
CMP/VGA AUDIO IN sockets (input)
These sockets can be used to provide audio for AV IN, YPbPr IN or VGA IN.
CMP IN (YP
B
P
R
) adapter socket (input)
Note: The CMP (YP
B
P
R
) adapter socket can be used to connect the attached
CMP (YP
B
P
R
) adapter cable with YPbPr
component video sockets. These
YPbPr sockets can be used to connect a device that has component video
sockets, such as a DVD player. The component sockets can recognize if the
device you're connecting to is Y P
B
P
R
compatible. The component sockets
provide excellent picture quality because the video is separated into three
independent parts.
COMPONENT IN
SPDIF
LAN
ANTENNA/
CABLE IN
CMP/VGA
AUDIO IN
R
L
CMP IN(YP
B
P
R
)
adapter
5
Introduction
AV RCA audio + video sockets (input)
The AV IN sockets can be used to connect a range of equipment, including
video recorders, camcorders, decoders, satellite receivers, DVD players, or
games consoles.
Note: AV IN shares video (P
R
of the CMP adpater) and audio sockets with
YP
B
P
R
.
AV adapter (output) socket
The AV OUT adapter socket can be used to connect the attached AV adapter
cable with VIDEO and AUDIO L & R OUT sockets.
VGA IN socket (input)
This socket can be used to connect a computer.
Note: VGA IN shares the same audio sockets with YPBPR.
USB 2.0 or USB 3.0 socket (input)
These sockets can be used to connect a USB device.
Note: The number of USB sockets on the TV may vary according to TV
model.
SD CARD (input)
The socket can be used to connect a SD card.
HDMI 1 (MHL) or HDMI 2 or HDMI 3 socket (input)
TheHDMI(High-DenitionMultimediaInterface)socketcanbeusedto
connect a PC with a compatible video card installed, certain DVD players or
ahigh-denitioncompatibledigitalsatellitedecoder.Thissocketprovidesan
uncompressed digital connection that carries both video and audio data by
way of an integrated mini-plug cable.
Note: Only HDMI sockets with the MHL identication will support the MHL
function, MHL stands for Mobile High-denition Link, and allows you to link a
MHL-capable mobile device to the television.
AV OUT
adapter
VGA IN
USB 2.0
Or USB 3.0
SD CARD
HDMI 1
(MHL)
Or HDMI 2
Or HDMI 3
AV IN
CMP/VGA
AUDIO IN
R
L
CMP IN(YP
B
P
R
)
adapter
6
Remote Control Functions
Most of your television's functions are available via the menus that appear on the screen. The remote control supplied
withyoursetcanbeusedtonavigatethroughthemenusandtocongureallthegeneralsettings.
Note: The remote control may differ depending on the model. Illustrations below are provided for reference only and
may differ from actual product appearance.
Introduction
APP STORE
HOME
ALL APPS
LANG
RETURN
INFO
TV
SOURCE
EPG
DISPLAY
ZOOM+
ZOOM
-
SUBTITLE
TEXT
LIST
SEARCH
SLEEP
RC311 FMI2
(On/Standby button) Turns the TV on or standby.
3D Brings up the 3D menu. (3D function is not available for certain models,
and also no 3D is on the remote control for certain models.)
(MUTE) Reduces the TV's volume to its minimum level. Press
again to restore the volume.
0-9 (numeric buttons) Enters channel numbers. Enters a letter, a digit or a
symbol in some functions.
(dot) To enter a dot (.) in a URL, an email address, a decimal number, etc.
RETURN Returns to the previous channel in TV mode.
VOL +/- (VOLUME UP/DOWN) Increases or decreases the TV's volume.
INFO Displays the widget information, if available, or displays the status
information of the current program.
TV Goes to the TV mode.
CH +/- (CHANNEL UP/DOWN) Scans up or down through the current channel
list and input sources.
APP STORE Goes to App Store.
HOME Goes to the smart TV homepage.
ALL APPS Goes to the page listing all installed apps.
MENU Brings up the main menu.
(On/Off button) Turns the TV on or standby.
3D
Accesses the 3D mode.
0-9
(numeric buttons) Enters channel numbers.
Enters a letter, a digit or a symbol in some functions.
SOURCE Brings up the signal source selection menu.
(Dot) To enter a digital channel with a sub-channel, enter the main
channel; then, press the dot( ), the sub-channel, and then the OK
button.
Turner
Selects Antenna or Cable.
(VOLUME UP/DOWN) Increases or decreases the TV's volume.VOL +/-
(MUTE) Reduces the TV's volume to its minimum level. Press again
to restore the volume.
(Connection) Enters the Connection menu.
CH +/- (CHANNEL UP/DOWN) Scans up or down through the current
channel list.
(YAHOO) Goes to YAHOO main page.
Goes to NETFLIX main page.
Shortcut to Smart TV.
MENU
Brings up the main menu or press to return to the previous menu.
(up, down, left, right, direction buttons) Highlights different items in
the menu system and adjusts the menu controls.
Zoom -/+
Selects the desired screen format.
OK When in the menu system, confirms your selection or changes
settings; To pop out Channel List menu.
/
/
Returns you to the previous channel.
EXIT Exits the menu system.
INFO
Displays the status information of the current program or source.
USB Accesses or exits the USB mode.
OPTION Shortcut to PVR, and Schedule List.
SLEEP Repeatedly press to set the sleep timer from 10 to 120 minutes.
To cancel the sleep timer, press SLEEP until " " appears.Sleep Off
GUIDE Toggles the Electronic Programme Guide between on and off.
FAV
Sets the favourite channel.
CH LIST
Displays the channel list menu.
T-LINK
Accesses the T-LINK menu.
Colored buttons
(Red/Green/Yellow/Blue) To select tasks.
PIC
Selects picture mode.
SOUND
Selects sound mode.
CC
Enters the CC menu.
MTS
Toggles through the MTS settings.
Note: MTS is only available in TV mode and the available
options may depending on the channel's signal.
(Previous) Goes to the previous chapter.
(Stop) Stops viewing.
(Play/Pause) Starts, pauses or resumes viewing.
(Next) Goes to the next chapter.
Searches backword.
Searches forward.
(up,down,left and right direction buttons) Highlights different items in
the menu system and adjusts the menu controls.
OK Wheninthemenusystem,conrmsyourselectionorchangessettings.
Goes back to the previous menu or interface.
SOURCE Brings up the signal source selection menu.
EPG Toggles the Electronic Program Guide between on and off.
Only applicable for digital channels. (not available for some models.)
ZOOM+/
-
Seletcs the desired screen mode.
SEARCH Goes to the channel search page.
LIST Displays the channel list menu.
DISPLAY Displays the status information of the current program.
SLEEP Repeatedly press to set the sleep timer from 10 to 240 minutes.
To cancel the sleep timer, press the button until "Close " appears.
Colored buttons (Red/Green/Yellow/Blue) Acts as dedicated function under certain
menus, such as EPG.
TEXT Toggles teletext between on and off (not available for some models).
LANG Selects a sound type available for selected analogue TV program;
selects an audio track available for selected digital TV program. In
some countries, it turns on or off the audio description function.
(Note: This function is not available for some models.)
SUBTITLE Selects a subtitle language available for selected digital TV program.
(Note: This function is not available for some models.)
(Previous) Goes to the previous chapter.
(Play) Starts or resumes viewing.
(Pause) Pauses viewing.
(Next) Goes to the next chapter.
Searches backword.
(Stop) Stops viewing. The button can also be used for PVR menu.
Searches forward.
7
Chapter 2 General Operation
Switching on
Follow the instructions on this page on how to switch on your TV set and
the remote control before going on to the following pages describing how to
use the channel set-up procedures.
1. Insert two AAA batteries into the remote control.
Precautions on using batteries:
-Onlyusethebatterytypesspecied.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
-Donotexposebatteriestoexcessiveheatsuchassunshine,reorthe
like,throwtheminare,rechargethemortrytoopenthem,asthis
could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it for
a long period of time.
2. Connect the power cable FIRST to the television, THEN to a mains
socket. (Note: If the power cable is connected to the television, please
only connect the power cable to the mains socket.)
Your TV set should only be connected to an AC supply. It must not be
connected to a DC supply. If the plug is detached from the cable, do not,
under any circumstances, connect it to a mains socket, as there is a risk
of electric shock.
Note: The gures are for representation only, the location of power
socket of the television may differ depending on the model.
3. Connect an outside aerial to the ANTENNA/CABLE IN socket at the back
of the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for
connectinganexternalaerialorotherequipmenttted.
Note: If you want to receive the signal from your cable or cable box,
please connect a coaxial cable to the ANTENNA/CABLE IN socket at the
back of the TV set.
4. When powered on, the TV will be turned on directly or be in standby
mode.
If the power indicator lights up, the TV set is in standby mode. Press the
button on the remote control or on the TV set to turn on the TV.
Switching off
• To put the TV set into standby mode, press the button on the
remote control. The TV set remains powered up, but with low energy
consumption.
• To switch off the TV set, unplug the mains socket from the mains outlet.
8
Network Connection
To access the internet, you must subscribe high speed broadband internet service from your internet service provider.
Your TV can be connected to your home network in two ways:
•Wired,usingtheRJ45(LAN)connectoronthebackpanel.
•Wireless,usingtheinternalwirelessorexternalwirelessUSBadapterandyourhomewirelessnetwork.
Note: Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection
method may be different depending on your actual network conguration. If you have any questions about your home
network, please refer to your ISP (Internet Service Provider).
Modem Internet
TV Set
Router
Ethernet
Port on the
back panel
or
Wireless
USB Adapter
Wireless Router
Modem
USB
port on the
back panel
TV Set
Channel Scan
Makesurethatthetelevisionisswitchedonandfollowallthestepsinturnspeciedhereafter.
1. Press MENU on the remote control under ATV source.
2. Pressthe◄/►toselectTV Setting, then press OK to enter the submenu. Press
/ to select Scan and press
OK to enter.
• Auto Scan:Press◄/►toselectAuto Scan and press
OK button to start channel search automatically.
Note: Depending on the number of channels you receive, it may take several minutes for the channel search to
nish. If you want to interrupt the process, press OK or
. The channels already found will be stored, and the
channels may not be stored in the order of standard channel list.
• Manual Scan:Press◄/►toselectManual Scan and press
OK button to enter. Select Start Freq, press OK to
edit the frequency. The same goes to End Freq, then select Start to begin manual channel scan. When Manual
scanstarted,theTVwillsearchthechannelfromthestartfrequencyandwillexitafterndingachannel.
• Fine Tune:Ifthepictureisnotclearyoucannetunethechannel.Press◄/►toselectFine Tune and press
OK
to enter. Select Frequency and press OK,use◄/►toeditthefrequencyuntilgettingabetterpicture.
3. Press
to return.
Note: 1. For models with DTV, it only has Auto Scan and Manual Scan to tune the TV, please refer to the above
steps and follow the prompt on the screen. 2. Digital channels support DVB-T2 & DVB-T.
General Operation
Connecting to a wired network
To connect to a wired network:
1. Ensure you have:
• An ethernet cable long enough to reach your TV
• A router or modem with an available Ethernet port
• A high-speed internet connection
• An Ethernet (LAN) port on the back of the TV
2. Connect your ethernet cable to the router and to the
Ethernet port on the back of the TV.
3. Use the Network Settings to configure the TV.
Connecting to a wireless network
To connect to a wireless network
1. Ensure you have:
• A router broadcasting a high-speed wireless signal
• A high-speed internet connection
• A wireless USB Adapter (not need for a built-in
wireless connection).
2. Remember to connect your wireless USB Adapter to
your TV's USB port.
9
Network Settings
AfteryouconnectyourhomenetworktotheTV,followthestepsbelowtocongurethenetworksettingsofyourTV.
Wireless Settings
Press Home to display the home menu, select Settings > Network Settings > Wireless Settings and press OK to
enter.
• Wireless Switch: This item allows you to turn on or turn off the internet connection by checking or unchecking
the box on the right.
• Wireless Networks: After turning on the Wireless Switch and refreshing, the available wireless networks will be
displayed in the list. Select the network you’d like to access and press OK to enter.
• Refresh Wireless: refresh the wireless networks list.
• IP Settings: change the IP settings. Press OK to enter. If you uncheck the Static IP and press OK in the menu
toconrm,thesetwillacquiretheIPaddressautomatically.TotypeinIPaddressmanually,youshouldhavethe
Static IP checked, press ▲/▼to select IP address, Gateway, DNS1 or DNS2 in the menu. press OK to display a
soft keyboard for editing. After editing, press
to return IP Settings menu. press OKinthemenutoconrm.
• Add Wireless Network: add a new wireless account in the wireless networks list.
• Wireless Direct Settings: In case there's no wireless network, open the Wireless Switch, enter Wireless Direct
Settings.AslongasthesmartphonechecktheTCL_p2p,youcansharelesbetweenthesmartphoneandthe
TV. (This option is not available for certain models.)
Press
to return and press Home to exit.
Wired Settings
Select Settings > Network Settings > Wired Settings and press OK to enter.
• Auto Get IP Address: automatically acquire the IP address.
• Manual Set IP Address: Press ▲/▼to select IP address, Subnet Mask, Gateway or DNS Address in the
menu. Press OK to display a soft keyboard for editing. After editing, press
to return Manual Set IP Address
menu. Press OK in the menu toconrm.
Press
to return and press Home to exit.
ADSL Dial-up
Select
Settings > Network Settings
> ADSL Dial-up and press OK to enter. At that time, a dialog box will pop up.
Type in your User Name and Password, select Connect and press OK to set up the connection.
Network Connection Guide
Select Settings > Network Settings > Network Connection Guide, press OKtoenter.Use◄/►andOK on the
remote control to operate according to the TV prompt.
General Operation
Wireless Router
Modem
TV Set
3. Use the Network SettingstoconguretheTV.
Note:
Some models may have internal wireless module,
then the wireless USB Adapter is unnecessary. Some
external wireless adapters can’t be compatible with the
TV.
Built-in wireless
connection
10
Chapter 3 Menu Operation
Menu Display
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figures and illustrations are provided for reference only and may differ from actual product appearance.
11
Using Home Menu
Note: Figures and illustrations in this User Manual are
provided for reference only and may differ from actual
product appearance. And for some models, certain
options are not available.
Press Home on the remote control to open the Home
menu.Press▲/▼/◄/►toselecticonsfromthescreen
list. Press OK to enter each option. To exit the menu,
press
or Home. (see Figure 1&2)
Press MENU,asubmenuwillpopout.Press◄/►to
select an item and press OKtoconrm.
Edit Homepage: Press OK to enter, you can move or
edit plate according to your favorites.
Move:movetheboardofHomemenu.Press◄/►to
select an item and press OKtoconrm.
Edit Plate: press OK to enter, then press ▲/▼/◄/►
to select an item on top right, and press OK to add
the icon to the board, a tick will display on the icon
you choose. Press OK again to delete the icon from
the board, the tick on the icon was gone.
Note: The pre-installed icons or apps can’t be deleted.
Set Wallpaper: change the wallpaper of Home menu.
Press
to exit the submenu.
On Home menu, there are 4 boards: Recommendation,
Entertainments, Utility and Custom Fields. The
preinstalled icons and apps are listed on certain board.
You can change the items' location according to your
favor, and add new items from internet.
Note: The pre-installed icons or apps cannot be deleted.
Note: The icons (regardless of order) listed here may
differ from actual product. For some models, certain
icons are not available. And more local apps may be
installed according to sales market for some models.
WARNING:
• Congurethenetwork settings before using Smart TV.
• Slow responses and/or interruptions may occur,
depending on your network conditions.
• If you experience a problem using an application,
please contact the content provider.
• According to circumstances of the contents provider,
an application’s updates or the application itself may
be discontinued.
• Depending on your country’s regulations, some
applications may have limited service or not be
supported.
■
Recommendation
All Apps
A shortcut to all apps. Press OK to enter and you will
ndallinstalledappshere.
App Store
Provide many useful and amusing apps. After entering,
you can see the recommended excellent apps. Press
▲/▼/◄/►toselect,pressOK to enter. You can see
the menu of App Store including Categories, My Apps,
Installation Required, Search, and User center on the
top of the screen, and New app, Hot, and All playing in
the middle.
Facebook
TV client of Facebook social application. After clicking
the icon and entering the application, you can browse
contents and communicate online via the TV.
TV Tweets
It is a social networking and micro-blogging service
provider. Via TV Tweets client, you can browse,
communicate with friends, post and update web
contents.
Note: Please refer to Settings> Select Time Zone
to select the time zone according to your location first
before using TV Tweets.
You Tube
You can view a variety of videos online.
Note: Please refer to Settings> Select Time Zone
to select the time zone according to your location rst
before using You Tube.
Frontline Commando: D Day
Frontline Commando: D-Day is a freemium 3D action
game based on the scenario of the Normandy landings
in WWII. You need a game console to play this game.
Browser
It’s an internet browser. You can browse webpage by
typing in URL or click network links.
•
Congure the network settings before using Browser.
nScreen
Please download and install the client software of
TCL nScreen software to your smart phone running
Androidrst,thenopentheclientsoftwareandoperate
according to the prompt on the smart phone and the
screen of TV.
Include Media Sharing, Remote Control and Help.
Media Sharing: After a smart phone/pad is
connectedtotheTV,photo,videoormusiclescan
be sent to the TV and played on it.
Remote Control: Smart phones can be used as
a remote control unit to operate TV after they are
connected to the TV via wireless network.
Help: Brief introduction about the features and usage
of functions under nScreen.
Note: To use the function, the smart TV and smart
phone should be connected to the same wireless
network. Some smart phones and Android systems
won't be supported.
■
Entertainments
Eternity Warriors 2
Eternity Warriors 2 is a kind of explosive action Role-
playing game. You need a game console to play this
Menu Operation
12
game.
Riptide GP
Riptide GP is a kind of Water motorboat game. You
need a game console to play this game.
■
Utility
Gesture Control
By simple hand movement, you can perform some
basic operations of TV like “OK”, “Return” and “Move”
etc. In some games, you can control your role in this
way. Operate in accordance with the prompts from the
wizard, you can experience TV control via gestures.
TCL Voice
Use voice to operate the TV. By inputting voice through
a voice-activated remote control, the TV will perform the
related tasks. For details, refer to relevant introductions
about this app on the screen.
Note: The voice-activated remote control is not a
standard accessory, you may need to buy separately.
You are recommended to buy TCL RC520 remote
control. This function is not available for all models.
Face Recognition
Press On button to activate face recognition function.
When you leave, TV will enter energy saving mode(On/
OfforOnly-Listen)afteraspecictime.
Function Switch: On, Off.
Saving Mode: On-Off, Only-Listen.
Start Time: You can choose the time to start face
recognition, 5 s, 1 min, 5 min,10 min.
T-cast
T-cast is a new function which integrates Wireless
Direct and MHL. You can use nScreen function through
Wireless Direct without Router, and enjoy sharing the
contentofyourmobilephoneonthehighdenitionand
large screen display TV via MHL.
Note: T-cast is not available for certain TV models. And
for some models, certain option (Wireless Direct) is not
available.
TV Guard
System management application including TV Checkup,
One Key Install, System Info., Startup Optimizer,
Memory Manager, Network Manager, Software
Manager, Security Protection, File Manager and
Settings.
TV Checkup: detect the tasks and apps, optimize
system.
One Key Install: select and install apps.
System Info: display the system status, SW version
etc.
Startup Optimizer: optimize startup speed.
Memory Manager: memory space management and
settings.
Network Manager: internet related app management.
Software Manager: app backup, update, move etc.
Security Protection: enable or disable apps.
File Manager: browseles.
Settings: change the settings of TV Guard.
Menu Operation
File Explorer
Access pictures, music, andvideolesintheexternal
storage device that is connected with the smart TV.
HomeCloud
HomeCloud includes photos, videos, music, documents
etc. You can download the client software of Home
Cloud app from App store, Google Play Store or the
URL http://life.tcl.com/download.html, and install it on
your mobile phone, computer, and pad.
Help
On-screen instruction manual of the TV. Press OK to
learn more detailed illustration.
Note: You may need a webcam to achieve some of the
above functions, e.g, Face Recognition and Gesture
Control. Webcam is not a standard accessory, you may
need to buy one seperately. Some external devices
like webcam, smart phone, game handle and external
wireless adapter may not be supported.
■
Custom Fields
Press OK in empty areas to add your favourite apps.
Using Left Home Menu
Note: Some of the functions may be unavailable in
certain sources. And for some models, certain options
are not available.
Press Home on the remote control to open the Home
menu. On the left of the screen, you can see the system
menu, including Source, Media, Settings and Message
Box (see Figure 1). Press▲/▼/◄/►toselectandpress
OK to enter each option. To exit the menu, press
or
Home.
■
Source
Include ATV, DTV, AV, YPBPR, HDMI1, HDMI2, HDMI3
and PC.Press▲/▼/◄/►toselectyourdesiredsource,
and then press OKtoconrm.
Note: Source available may differ depending on the
model.
■
Media
A shourtcuttomultimediales.Itallowsyoutoenjoythe
videos, pictures and music in the storage device (SD
card or U-disk).
■
Settings
Include the following options (see Figure 7):
Picture Settings:Press◄/►tosetPicutre Mode,
Backlight, OSD Backlight and Nature Light.
Auto Source: Includes Manual, Auto and Close.
Press◄/►toselectwhatyouwant.
Sound Settings: You can adjust the mode of SPDIF,
Smart Audio, Volume, Balance, Smart Volume and
Scenebypressing▲/▼/◄/►.
Network Settings:Press▲/▼buttontoselect
Wireless Settings, Wired Settings, ADSL Dial-up,
13
Menu Operation
EPG: It is an on-screen guide that displays scheduled
TV programs. You can navigate, select and view
programs. Press MENU on the remote then select EPG
or press EPG on the remote control to enter. The Now
and Next EPG menu will appear, which allows you to
get information about the current or following programs
playing on each channel. Press EPG or
on the
remote control to exit EPG and switch to the selected
channel.
Note: EPG is only available for digital channels.
TV Setting: Press OK to enter TV Setting. Use ▲/▼
to
select the options below:
Picture: Press OK to access itssubmenu.Press▲/▼
to choose one option, and press OKthenuse◄/►to
edit. Press
to return.
- Picture Mode: User, Normal, Vivid and Mild.
- Backlight: 0~100
- Color: 0~100
- Picture Size: 16:9, 4:3, Auto. Some modes may not
be available under some sources and unable to be
selected.
- View: Full, Normal.
- Nature Light: Normal, Dynamic, Off.
- Picture Type: Auto, Video and PC (only available
under HDMI source)
- Professional Setting:
Brightness: 0~100
Contrast: 0~100
Sharpness: 0~100
Tint: 0~100 (only available in NTSC system)
Col.Temp: Cold, Warm, Normal.
GAMMA: -4~4
DCC: On, Off.
Sound: Press OK to access its submenu. The options
are as follows:
- SPDIF: AUTO, PCM,OFF
- Smart Audio: Normal, Music, Movie, News
- Volume: 0~100
- Balance: -50~50
- Smart Volume: On, Off.
- Scene: Desk, Wall.
Channel Manager: Hide or move the channel you
select; change the channel display sequence on the
channel list.
Scan: Press OK to access options of scan: Auto Scan,
Manual Scan, Fine Tune. For details, please refer to
Channel Scan on page 8.
VGA: Press ▲/▼to select Auto Adjust, H.Position,
V.Position, Sampling Clock and Phase Adjust.
Note: VGA is only available under PC source.
DTV Setting:
Note: DTV Setting is only displayed on screen under
DTV source.
Network Connection Guide, and press OK to enter.
For details, please refer to Network Settings on
page 9.
System Update: Includes System Software Update,
Factory Default and System Repair.
- System Software Update: This function allows you
to download and update software.
- Factory Default: Press OK to enter, select and
conrmtorestorethesettingtothefactorydefault.
- System Repair: Press OK to enter, select and
conrmtorepairthesystemifitisnotfunctioning
properly.
System Information: It is used for checking the
device number and software version, etc.
Advanced Settings: Select this item to set
Language, Sleep Timer, Input Method and
Location.
Select Time Zone: Press OK to enter, press ▲/▼ to
select time zone according to your location.
■
Message Box
Display Huan Notice in the Message Box, press OK to
enter.
Using TV Menu
The instructions below introduce how to operate and
access the main menu of the TV with the remote control.
Note: Some of the functions may be unavailable in
certain input sources. And for some models, certain
options are not available.
To access the menu system:
1. Press MENU on the remote control during video
display to open the TV menu (see Figure 8).
2. Press the
◄/►toselectthedesireditem,thenpress
OK to enter the submenu.
3. Press
to return.
Sound:Press▲/▼toselectoptions.PressOK to
conrm,andpress
to return.
Effect: Normal, Music, Movie, News
Format: DK, BG, I, M (only available for analog
channels)
Track: Stereo, Left Channel, Right Channel (only
available for digital channels)
SPDIF: AUTO, PCM, OFF
Picture:Press▲/▼toselectPicture Mode and
Picture Size and press OKtoconrm.Press◄/►to
select the option you like.
3D: Press ▲/▼tocongureyour3Dfunction.For
details, refer to Viewing TV Using the 3D Function on
page 14.
Channel:Press▲/▼toselectachannelasthecurrent
program you want to watch, and press OKtoconrm.
Press
to return to the previous menu.
Note: Channel information is only available when
channel search is implemented.
Source:Press▲/▼andthenOK to select an input
source.
14
Menu Operation
DTV Settings
Subtitle and Audio
PIN Setting
Parental Control
Over-The-Air Upgrade
PVR Setting
Press OK to display the menu items.
- Subtitle and Audio: Press ▲/▼to select an item
anduse◄/►tochoosethesubtitleandaudio
language.
- PIN Setting: Use the number buttons to enter the
four-digit number password to enter the PIN setting.
You can change the password on the submenu, it
affects the password in PIN Setting and Parental
Control.
Change PIN: this option allows you to change the
password. Press the number button to enter the
new password and re-enter it again to confirm.
Reset PIN: this option allows you to
delete the password you set and restore
to the factory default password 1234.
- Parental Control: Use the number buttons to enter
thefour-digitnumberpassword.Thenuse◄/►to
adjust the rating. The password must be entered
before continuing with Parental settings next time.
Notes:
- Please remember the personal PIN code you set.
- You must enter your personal code before entering
the PIN Setting and Parental Control menu. The
default password is 1234. The super password
is 0423. If you forget your code, enter the super
password to override any existing codes.
- When the current channel is locked, you can press
OK and enter the password to enter.
- Over-The-Air Upgrade: Enables you to search
for and install the latest version of the software if
available from the broadcast.
Note: This feature may not be supported depending
on the adaptation of your local broadcaster.
- PVR Setting:Allows you to record the TV
programme so that you will not miss the favourite
part even if you go out. Before you use the function,
connectaUSBstoragedevicetotheTVrst.For
thersttime,youshoulddothedisksetupforthe
USB storage device.
Note: This feature is available only in selected
products and, due to specific TV network limitations
and country technical requirements, might not be
available in product or place of installation. This
feature might also be blocked by TV network due
to copyright protection (HD content, recording
protection).
Select Disk: this option allows you to select the disk
for time shift .
TimeShift Size: this option allows you to select the
size for time shift
TimeShift OnOff: Press◄/►toselectOntoswitch
on the time shift function. Also can use
■ ●
button
on the remote control and select , then press OK to
confirm and
follow the directions on the screen to
do the setup.
Notes:
- Before you connect the USB storage device to the
TV, make sure you have backed up the data in the
drive to avoid the loss of your important data due
to unforeseen malfunction.
- We recommend you use a USB storage device
with free capacity above 1GB and disk speed faster
than 5.0MB/sec.
- The bigger the USB storage device free memory
for time shift, the bigger the recording length.
- If you change the channel in time shift mode, a
message prompts you to select Yes or No. You
can select Yes to exit the time shift function and
execute the channel change.
Smart TV IME
This TV product uses Smart TV IME (Input Method
Editor). The soft keyboard will be displayed on screen
when you begin to input. Press ▲/▼/◄/►tohighlight a
key, and press OK to input. Highlight the Shift key, and
then press OK to type one uppercase letter. For caps
lock, highlight the Shift key and double-press OK, you
can then type uppercase until you shift again.
Special Function
Viewing TV Using the 3D Function
Warnings:
- Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom,
stop viewing 3D TV, remove your 3D glasses and
rest.
- Watching 3D images too closely or for a long period
of time may harm your eyesight.
- A responsible adult should frequently check on
children who are using the 3D function.
- Do not use the 3D glasses for any other purpose
than viewing 3D images on a 3D TV.
- Do not use the 3D function or 3D glasses while
walking or moving around, otherwise it may result in
injuries due to running into objects, tripping, and/or
falling.
Note: 3D function is not available for some models.
To fully enjoy the 3D effect, please follow the steps below:
1. Press MENU on the remote control.
2. Select 3D and press OK to enter.
3. Use ▲/▼ to select the right format (2D-to-3D, Side-
15
- OK to start recording, the record file is put into a
folder named after the channel number under the
PVR folder in Media center > Video;
- ▲/▼/◄/►toadjusttherecordingduration.
- the
●
on the screen to stop recording manually;
in normal operation, the recording will stop
automatically when the recording duration has
passed.
3. In recording, PVR mini pane will also show on the
screen to indicate the recording progress.
4. To watch the recorded programme, exit PVR mode
first and go to Media center > Video. Select the
folder PVR, then select the related record file. Press
OK to play. (It is the same if you record a digital
radio programme).
Notes:
- This feature is available only for non encrypted
digital channels. Even when CICAM (CI or CI+) is
inserted, this feature is not available on encrypted
channels.
- Supports USB storage devices of FAT32 & NTFS
format.
- Before you connect the USB storage device to the
set, make sure you have backed up the data in the
drive to avoid the loss of your important data due
to unforeseen malfunction.
- The bigger the USB storage device free memory
for the PVR function, the bigger the recording
length.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The set cannot play files normally if the parameters
of the file exceed the limitations of the system, the
file format is not supported, the file is damaged, or
the file cannot be decoded.
- Do not disconnect the USB storage device when
the system is reading a file or transmitting data,
otherwise the system or the device may be
damaged.
By-Side, Top-and-Bot, Line Interlace, Frame
Sequence) and press OK to confirm.
Note: Some 3D formats may not be available
depending on the format of the image source. 3D
mode is not supported under VGA source.
4. Wear the 3D glasses and enjoy the 3D effect.
Note: For those models using bluetooth 3D glasses,
please refer to the user’s guide of 3D glasses.
5. When the 3D movie is playing under non-USB
sources, press MENU, select 3D > More 3D Setting,
and press OK to bring up a menu for adjusting the
3Deffect.Press▲/▼/◄/►toselectandchange
settings, and press
to return. The options of 3D
effect are as follows:
• 3D Mode: 2D-to-3D, Side-By-Side, Top-and-Bot,
Line Interlace, Frame Sequence, Off.
• Switch L
-
R: On, Off.
• Depth: -10~10
• 3D to 2D: Left, Right, Off.
• Auto Mode: On, Off.
6. To exit 3D mode, press MENU, select 3D > Exit 3D,
and then press OK.
PVR (Personal Video Recorder)
Allows you to record non encrypted TV programmes.
Before you use the function, connect a USB storage
devicetothesetrst.
Note: This feature is available only in selected products
and, due to specific TV network limitations and
country technical requirements, might not be
available in product or place of installation. This
feature might also be blocked by TV network due
to copyright protection (HD content, recording
protection). Please use
■ ●
on the remote
control to check if this feature is available in your
product.
1. Press
■ ●
on the remote control and select
●
.
2. Press:
16
Chapter 4 Other Information
1. Fail to link the network.
- Check if your TV is connected with the network;
- Reboot your TV;
- Consultyourinternetserviceprovidertoconrm
if access of your router is supported. Refer to the
operation manual of your router.
- Make sure your TV is connected to a router, and
make sure your router is powered on. Check that
your router/modem has an internet connection, and
that your Ethernet cables/wireless connection is OK.
Test your connection with a computer to make sure it
is OK. Should the problem persist, contact customer
service.
2. The video could not be played smoothly.
- VideosfromyourUSBashdrive---Itmayresult
fromdatatransmission,oritscodeowisfarbeyond
the supported formats of this TV set.
- Videos downloaded from internet, or online videos.
a. It may be caused by the lower bandwidth of your
network. A high network speed is required to
handle online videos.
b. Peak internet usage times may affect the
bandwidth.
c. Check if any other computers on the same network
are also operating, as they may be using up
bandwidth. Especially if they are downloading or
playing online videos.
d. The video may be not smooth itself, it is not the
problem of your TV or network.
3. When two mobile hard disks are connected
with the TV at the same time, they will not be
recognized some times.
- All mobile hard disks consume a lot of power,
which may result in power supply problems. We
recommend inserting only one hard disk, or a low
power consumption mobile hard disk.
4. The video from a mobile hard disk (USB) is
playing with no sound.
- The audio format of the video in your mobile hard disk
is not supported by the TV player.
5. Some videos fail to play.
- The formats of the videos may not be supported
by the TV, especially videos shot by certain kinds
of cameras, generally with their private protocol of
formats, which are not compatible with your TV.
6. Video stops playing midway.
- Mistakes may occur when videos are copied or
compressed, so they may automatically stop playing
during playback.
7. What should I pay attention to, when I do SW
updating?
- No power cuts when SW is updating;
- Avoid any operations with your remote control when
SW is updating;
- Depending on your internet connection speed, the
software updating process may take some time.
8. There are no distinct changes of TV interface after
SW updating.
- Under certain conditions, SW updating may not only
update or add new functions but also improve the
performance of the TV set, without distinct changes
to the user interface. Also, there may be no changes
to the user interface at all.
Problems & Solutions
Note: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-network
functioned TV models can simply ignore them.
17
Troubleshooting
Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.
No picture, no sound
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.
No color
1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white program may be
received.
Remote control does not work
1. Change the batteries.
2. Batteries are not installed correctly.
3. Main power is not connected.
No picture, normal sound
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
Normal picture, no sound
1. Press the VOLUME UP button to increase volume.
2. Volume is set to mute, press the Mute button to
restore sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Unorderly ripples on the picture
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.
Blank screen in VGA mode
Perhaps the TV can not recognize the resolution set
by the PC. Suggest to change to the best resolution or
other standard resolutions of the Windows system.
Snowy dots and interference
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be
marred by dots. When the signal is extremely weak, it
may be necessary to install a special antenna to improve
the reception.
1. Adjust the position and orientation of the indoor/
outdoor antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may
happen.
Ignition
Black spots or horizontal streaks appear, or the picture
uttersordrifts.Thisisusuallycausedbyinterference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ghost
Ghosts are caused by the television signal following
twopaths.Oneisthedirectpath,theotherisreected
from tall buildings, hills, or other objects. Changing the
direction or position of the antenna may improve the
reception.
Radio frequency interference
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
Find out and remove the radio interference source.
* Figures and illustrations in this User Manual are
provided for reference only and may differ from actual
product appearance. Product design and specications
may be changed without notice.
Other Information
72-RT95HB-EAPAA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

TCL LED65E5700UDS Operating instructions

TCL
Brand
TCL
Model
LED65E5700UDS
Category
LCD TVs
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents