TCL LED49E5700UDS Operating instructions

Brand: TCL

Model: LED49E5700UDS

Category: LCD TVs

Type: Operating instructions

This manual is also suitable for

刘莹

制作表编号：HZ2014-12-016R

物料编号：72-RT95HB-EAPAA

内容：说明书

型号：L55E5700UDS

日期：2014-12-9

BOM H7-55E57CY-IRNC0AA编号：

牌子名称： LED55E5700UDSTCL

批次号：OLK117942B

机芯：RT95H-AP

制作人

PREPARED BY：

项目美工工程师/

EN G. C H EC KE D BY:

市场业务中心确认

C O N F IR M BY：

ii)

iii)

(SCALE)

(SIZE)

(COLOUR)

非1:1

白底黑字，哑粉纸；80g

TCL多媒体科技控股有限公司

运营中心 - 制造中心 - 一厂TV

TV工程部产品辅助设计室(外销)

销往地： IRAN

Figures and illustrations in this User’s Guide are

provided for reference only and may dier from

actual product appearance. Product design and

specications may be changed without notice.

OPERATION MANUAL

LED55E5700UDS/LED55E6700UDS

3D SMART TV

Table of Contents

Chapter 1: Introduction ......................................................................................................3

Precautions ........................................................................................................................................3

Product ..............................................................................................................................................3

Power and Plug .................................................................................................................................3

Power Cord and Signal Cable ...........................................................................................................3

Use Environment ...............................................................................................................................3

Cleaning ............................................................................................................................................3

Hanging the TV Set on the Wall ........................................................................................................3

Important Information ........................................................................................................................3

Buttons on the TV ..............................................................................................................................4

Sockets ...............................................................................................................................................4

Remote Control Functions ................................................................................................................6

Chapter 2: General Operation ...........................................................................................7

Switching on .......................................................................................................................................7

Switching off ......................................................................................................................................7

Channel Scan .....................................................................................................................................8

Network Connection .........................................................................................................................8

Network Settings ................................................................................................................................9

Chapter 3: Menu Operation .............................................................................................10

Menu Display ....................................................................................................................................10

Using Home Menu ........................................................................................................................... 11

Recommendation ............................................................................................................................11

Entertainments ................................................................................................................................11

Utility ................................................................................................................................................12

Custom Fields .................................................................................................................................12

Using Left Home Menu ....................................................................................................................12

Source .............................................................................................................................................12

Media ...............................................................................................................................................12

Settings ...........................................................................................................................................12

Message Box ...................................................................................................................................13

Using TV Menu .................................................................................................................................13

Smart TV IME ....................................................................................................................................14

Special Function ..............................................................................................................................14

Viewing TV Using the 3D Function ..................................................................................................14

PVR (Personal Video Recorder) .....................................................................................................15

Chapter 4: Other Information ..........................................................................................16

Problems & Solutions .....................................................................................................................16

Troubleshooting ...............................................................................................................................17

Chapter 1 Introduction

Precautions

Read all of the instructions before operating the set.

Keep these instructions well for future use.

Product

• Do not block or cover the ventilation openings on

the back cover.

• Do not push objects of any kind into this unit through

the cabinet slots as they could touch the current

carryingpartsorshort-circuitparts,resultinginre,

electric shock, or damage to the unit.

• Do not attempt to open the cabinet as this may

cause damage. There are no parts inside you can

servicebyyourself.Referallservicingtoqualied

personnel.

• Donottouchthescreensurfacewithngersasthis

may scratch or mar the TV screen.

• Do not impact the TV screen with hard pressure as

this may damage the TV screen severely.

Power and Plug

• Unplug the set under the following conditions:

- If the set will not be used for a long period of time.

- If the power cord or the power outlet/plug is

damaged.

- Follow the instructions to install and adjust the

product. Adjust those controls that are covered

in these operating instructions as improper

adjustment of other controls may result in damage.

If this happens, unplug the set and refer to the

service personnel.

- If the set is subject to impact or has been dropped

and the cabinet has been damaged.

• Where the mains plug or an appliance coupler is

used as disconnect device, the disconnect device

shall remain readily operable.

(*Where an all-pole mains switch is used as the

disconnect device, the switch shall remain readily

operable.)

Power Cord and Signal Cable

• Do not allow anything to rest on or roll over the

power cord and the signal cable.

• Protect the power cord and the signal cable from

being trampled.

• Do not overload the power cord or the power outlet.

• Do not expose the power cord and the signal cable

to moisture.

Use Environment

• Do not place the set on an unstable cart, stand, or

table.

• Place the set on a place that allows good ventilation.

• Do not use the set near damp, and cold areas.

Protect the set from overheating.

• Keep the set away from direct sunlight.

• Apparatus shall not be exposed to dripping or

splashingandnoobjectslledwithliquids,suchas

vases, shall be placed on the apparatus.

• Do not use the set near dust place.

• Operating Temperature: 5°C

to 35°C (41°F to 95°F)

Operating Humidity: 20% to 80%, non-condensing

Storage Temperature: -15°C to 45°C (5°F to 113°F)

Storage Humidity: 10% to 90%, non-condensing

Cleaning

• Dust the set by wiping the screen and the cabinet

with a soft, clean cloth or some special liquid cleaner.

• Do not apply excessive force to the screen when

cleaning.

• Do not use water or other chemical cleaner to clean

the screen as this may damage the surface of the TV

screen.

Hanging the TV Set on the Wall

Warning: This operation requires two people.

To ensure a safe installation, observe the following

safety notes:

• Check that the wall can support the weight of the TV

set and wall mount assembly.

• Follow the mounting instructions provided with the

wall mount.

• The TV set must be installed on a vertical wall.

• Make sure to use only screws suitable for the

material of the wall.

• Make sure that the TV set cables are placed so that

there is no danger of tripping over them.

All other safety instructions about our TV sets are also

applicable here.

Important Information

Ifatelevisionisnotpositionedinasufcientlystable

location, it can be potentially hazardous due to falling.

Many injuries, particularly to children, can be avoided

by taking simple precautions such as:

• Using cabinets or stands recommended by the

manufacturer of the television.

• Only using furniture that can safely support the

television.

• Ensuring the television is not overhanging the edge

of the supporting furniture.

• Not placing the television on tall furniture (for

example, cupboards or bookcases) without anchoring

both the furniture and the television to a suitable

support.

• Not standing the television on cloth or other materials

placed between the television and supporting

furniture.

• Educating children about the dangers of climbing on

furniture to reach the television or its controls.

Note: Graphics contained within this publication

are for representation only.

Buttons on the TV

1. CH+/- (CHANNEL UP/DOWN) button

Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the

remote and adjusts menu controls.

2. VOL+/- (VOLUME UP/DOWN) button

Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote

and adjust menu controls.

3. HOME (

) button

Return to Home menu or enter certain source from Home menu.

4. OK button

Inthemenusystem,conrmsyourselectionorchangessettings.

5. POWER (

) button

Turns the TV on or into standby. (Note: for some models, the POWER button turns the TV on or off.)

Note:

The location and names of the function buttons and power button on the TV may vary according to TV model, and

not all buttons are available on all models.

Sockets

Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets are

available on all models.

Introduction

LAN

RJ45 plug for connecting to external modem or network access equipment.

SPDIF socket (output)

The SPDIF socket can be used to connect a compatible digital audio receiver.

ANTENNA/CABLE IN socket (input)

This socket can be used to connect the outside aerial or cable network.

CMP/VGA AUDIO IN sockets (input)

These sockets can be used to provide audio for AV IN, YPbPr IN or VGA IN.

CMP IN (YP

) adapter socket (input)

Note: The CMP (YP

) adapter socket can be used to connect the attached

CMP (YP

) adapter cable with YPbPr

component video sockets. These

YPbPr sockets can be used to connect a device that has component video

sockets, such as a DVD player. The component sockets can recognize if the

device you're connecting to is Y P

compatible. The component sockets

provide excellent picture quality because the video is separated into three

independent parts.

COMPONENT IN

SPDIF

LAN

ANTENNA/

CABLE IN

CMP/VGA

AUDIO IN

CMP IN(YP

)

adapter

Introduction

AV RCA audio + video sockets (input)

The AV IN sockets can be used to connect a range of equipment, including

video recorders, camcorders, decoders, satellite receivers, DVD players, or

games consoles.

Note: AV IN shares video (P

of the CMP adpater) and audio sockets with

AV adapter (output) socket

The AV OUT adapter socket can be used to connect the attached AV adapter

cable with VIDEO and AUDIO L & R OUT sockets.

VGA IN socket (input)

This socket can be used to connect a computer.

Note: VGA IN shares the same audio sockets with YPBPR.

USB 2.0 or USB 3.0 socket (input)

These sockets can be used to connect a USB device.

Note: The number of USB sockets on the TV may vary according to TV

model.

SD CARD (input)

The socket can be used to connect a SD card.

HDMI 1 (MHL) or HDMI 2 or HDMI 3 socket (input)

TheHDMI(High-DenitionMultimediaInterface)socketcanbeusedto

connect a PC with a compatible video card installed, certain DVD players or

ahigh-denitioncompatibledigitalsatellitedecoder.Thissocketprovidesan

uncompressed digital connection that carries both video and audio data by

way of an integrated mini-plug cable.

Note: Only HDMI sockets with the MHL identication will support the MHL

function, MHL stands for Mobile High-denition Link, and allows you to link a

MHL-capable mobile device to the television.

AV OUT

adapter

VGA IN

USB 2.0

Or USB 3.0

SD CARD

HDMI 1

(MHL)

Or HDMI 2

Or HDMI 3

AV IN

CMP/VGA

AUDIO IN

CMP IN(YP

)

adapter

Remote Control Functions

Most of your television's functions are available via the menus that appear on the screen. The remote control supplied

withyoursetcanbeusedtonavigatethroughthemenusandtocongureallthegeneralsettings.

Note: The remote control may differ depending on the model. Illustrations below are provided for reference only and

may differ from actual product appearance.

Introduction

APP STORE

HOME

ALL APPS

LANG

RETURN

INFO

SOURCE

EPG

DISPLAY

ZOOM+

ZOOM

SUBTITLE

TEXT

LIST

SLEEP

RC311 FMI2

(On/Standby button) Turns the TV on or standby.

3D Brings up the 3D menu. (3D function is not available for certain models,

and also no 3D is on the remote control for certain models.)

(MUTE) Reduces the TV's volume to its minimum level. Press

again to restore the volume.

0-9 (numeric buttons) Enters channel numbers. Enters a letter, a digit or a

symbol in some functions.

(dot) To enter a dot (.) in a URL, an email address, a decimal number, etc.

RETURN Returns to the previous channel in TV mode.

VOL +/- (VOLUME UP/DOWN) Increases or decreases the TV's volume.

INFO Displays the widget information, if available, or displays the status

information of the current program.

TV Goes to the TV mode.

CH +/- (CHANNEL UP/DOWN) Scans up or down through the current channel

list and input sources.

APP STORE Goes to App Store.

HOME Goes to the smart TV homepage.

ALL APPS Goes to the page listing all installed apps.

MENU Brings up the main menu.

(On/Off button) Turns the TV on or standby.

Accesses the 3D mode.

0-9

(numeric buttons) Enters channel numbers.

Enters a letter, a digit or a symbol in some functions.

SOURCE Brings up the signal source selection menu.

(Dot) To enter a digital channel with a sub-channel, enter the main

channel; then, press the dot( ), the sub-channel, and then the OK

button.

Turner

Selects Antenna or Cable.

(VOLUME UP/DOWN) Increases or decreases the TV's volume.VOL +/-

(MUTE) Reduces the TV's volume to its minimum level. Press again

to restore the volume.

(Connection) Enters the Connection menu.

CH +/- (CHANNEL UP/DOWN) Scans up or down through the current

channel list.

(YAHOO) Goes to YAHOO main page.

Goes to NETFLIX main page.

Shortcut to Smart TV.

Brings up the main menu or press to return to the previous menu.

(up, down, left, right, direction buttons) Highlights different items in

the menu system and adjusts the menu controls.

Zoom -/+

Selects the desired screen format.

OK When in the menu system, confirms your selection or changes

settings; To pop out Channel List menu.

Returns you to the previous channel.

EXIT Exits the menu system.

INFO

Displays the status information of the current program or source.

USB Accesses or exits the USB mode.

OPTION Shortcut to PVR, and Schedule List.

SLEEP Repeatedly press to set the sleep timer from 10 to 120 minutes.

To cancel the sleep timer, press SLEEP until " " appears.Sleep Off

GUIDE Toggles the Electronic Programme Guide between on and off.

FAV

Sets the favourite channel.

CH LIST

Displays the channel list menu.

T-LINK

Accesses the T-LINK menu.

Colored buttons

(Red/Green/Yellow/Blue) To select tasks.

PIC

Selects picture mode.

SOUND

Selects sound mode.

Enters the CC menu.

MTS

Toggles through the MTS settings.

Note: MTS is only available in TV mode and the available

options may depending on the channel's signal.

(Previous) Goes to the previous chapter.

(Stop) Stops viewing.

(Play/Pause) Starts, pauses or resumes viewing.

(Next) Goes to the next chapter.

Searches backword.

Searches forward.

(up,down,left and right direction buttons) Highlights different items in

the menu system and adjusts the menu controls.

OK Wheninthemenusystem,conrmsyourselectionorchangessettings.

Goes back to the previous menu or interface.

SOURCE Brings up the signal source selection menu.

EPG Toggles the Electronic Program Guide between on and off.

Only applicable for digital channels. (not available for some models.)

ZOOM+/

Seletcs the desired screen mode.

SEARCH Goes to the channel search page.

LIST Displays the channel list menu.

DISPLAY Displays the status information of the current program.

SLEEP Repeatedly press to set the sleep timer from 10 to 240 minutes.

To cancel the sleep timer, press the button until "Close " appears.

Colored buttons (Red/Green/Yellow/Blue) Acts as dedicated function under certain

menus, such as EPG.

TEXT Toggles teletext between on and off (not available for some models).

LANG Selects a sound type available for selected analogue TV program;

selects an audio track available for selected digital TV program. In

some countries, it turns on or off the audio description function.

(Note: This function is not available for some models.)

SUBTITLE Selects a subtitle language available for selected digital TV program.

(Note: This function is not available for some models.)

(Previous) Goes to the previous chapter.

(Play) Starts or resumes viewing.

(Pause) Pauses viewing.

(Next) Goes to the next chapter.

Searches backword.

(Stop) Stops viewing. The button can also be used for PVR menu.

Searches forward.

Chapter 2 General Operation

Switching on

Follow the instructions on this page on how to switch on your TV set and

the remote control before going on to the following pages describing how to

use the channel set-up procedures.

1. Insert two AAA batteries into the remote control.

Precautions on using batteries:

-Onlyusethebatterytypesspecied.

- Make sure you use the correct polarity.

- Do not mix new and used batteries.

- Do not use rechargeable batteries.

-Donotexposebatteriestoexcessiveheatsuchassunshine,reorthe

like,throwtheminare,rechargethemortrytoopenthem,asthis

could cause them to leak or explode.

- Remove the batteries from the remote control if you are not using it for

a long period of time.

2. Connect the power cable FIRST to the television, THEN to a mains

socket. (Note: If the power cable is connected to the television, please

only connect the power cable to the mains socket.)

Your TV set should only be connected to an AC supply. It must not be

connected to a DC supply. If the plug is detached from the cable, do not,

under any circumstances, connect it to a mains socket, as there is a risk

of electric shock.

Note: The gures are for representation only, the location of power

socket of the television may differ depending on the model.

3. Connect an outside aerial to the ANTENNA/CABLE IN socket at the back

of the TV set.

The aerial socket (75 OHM - VHF / UHF / cable) can be used for

connectinganexternalaerialorotherequipmenttted.

Note: If you want to receive the signal from your cable or cable box,

please connect a coaxial cable to the ANTENNA/CABLE IN socket at the

back of the TV set.

4. When powered on, the TV will be turned on directly or be in standby

mode.

If the power indicator lights up, the TV set is in standby mode. Press the

button on the remote control or on the TV set to turn on the TV.

Switching off

• To put the TV set into standby mode, press the button on the

remote control. The TV set remains powered up, but with low energy

consumption.

• To switch off the TV set, unplug the mains socket from the mains outlet.

Network Connection

To access the internet, you must subscribe high speed broadband internet service from your internet service provider.

Your TV can be connected to your home network in two ways:

•Wired,usingtheRJ45(LAN)connectoronthebackpanel.

•Wireless,usingtheinternalwirelessorexternalwirelessUSBadapterandyourhomewirelessnetwork.

Note: Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection

method may be different depending on your actual network conguration. If you have any questions about your home

network, please refer to your ISP (Internet Service Provider).

Modem Internet

TV Set

Router

Ethernet

Port on the

back panel

Wireless

USB Adapter

Wireless Router

Modem

USB

port on the

back panel

TV Set

Channel Scan

Makesurethatthetelevisionisswitchedonandfollowallthestepsinturnspeciedhereafter.

1. Press MENU on the remote control under ATV source.

2. Pressthe◄/►toselectTV Setting, then press OK to enter the submenu. Press

/ to select Scan and press

OK to enter.

• Auto Scan:Press◄/►toselectAuto Scan and press

OK button to start channel search automatically.

Note: Depending on the number of channels you receive, it may take several minutes for the channel search to

nish. If you want to interrupt the process, press OK or

. The channels already found will be stored, and the

channels may not be stored in the order of standard channel list.

• Manual Scan:Press◄/►toselectManual Scan and press

OK button to enter. Select Start Freq, press OK to

edit the frequency. The same goes to End Freq, then select Start to begin manual channel scan. When Manual

scanstarted,theTVwillsearchthechannelfromthestartfrequencyandwillexitafterndingachannel.

• Fine Tune:Ifthepictureisnotclearyoucannetunethechannel.Press◄/►toselectFine Tune and press

to enter. Select Frequency and press OK,use◄/►toeditthefrequencyuntilgettingabetterpicture.

3. Press

to return.

Note: 1. For models with DTV, it only has Auto Scan and Manual Scan to tune the TV, please refer to the above

steps and follow the prompt on the screen. 2. Digital channels support DVB-T2 & DVB-T.

General Operation

Connecting to a wired network

To connect to a wired network:

1. Ensure you have:

• An ethernet cable long enough to reach your TV

• A router or modem with an available Ethernet port

• A high-speed internet connection

• An Ethernet (LAN) port on the back of the TV

2. Connect your ethernet cable to the router and to the

Ethernet port on the back of the TV.

3. Use the Network Settings to configure the TV.

Connecting to a wireless network

To connect to a wireless network

1. Ensure you have:

• A router broadcasting a high-speed wireless signal

• A high-speed internet connection

• A wireless USB Adapter (not need for a built-in

wireless connection).

2. Remember to connect your wireless USB Adapter to

your TV's USB port.

Network Settings

AfteryouconnectyourhomenetworktotheTV,followthestepsbelowtocongurethenetworksettingsofyourTV.

Wireless Settings

Press Home to display the home menu, select Settings > Network Settings > Wireless Settings and press OK to

enter.

• Wireless Switch: This item allows you to turn on or turn off the internet connection by checking or unchecking

the box on the right.

• Wireless Networks: After turning on the Wireless Switch and refreshing, the available wireless networks will be

displayed in the list. Select the network you’d like to access and press OK to enter.

• Refresh Wireless: refresh the wireless networks list.

• IP Settings: change the IP settings. Press OK to enter. If you uncheck the Static IP and press OK in the menu

toconrm,thesetwillacquiretheIPaddressautomatically.TotypeinIPaddressmanually,youshouldhavethe

Static IP checked, press ▲/▼to select IP address, Gateway, DNS1 or DNS2 in the menu. press OK to display a

soft keyboard for editing. After editing, press

to return IP Settings menu. press OKinthemenutoconrm.

• Add Wireless Network: add a new wireless account in the wireless networks list.

• Wireless Direct Settings: In case there's no wireless network, open the Wireless Switch, enter Wireless Direct

Settings.AslongasthesmartphonechecktheTCL_p2p,youcansharelesbetweenthesmartphoneandthe

TV. (This option is not available for certain models.)

Press

to return and press Home to exit.

Wired Settings

Select Settings > Network Settings > Wired Settings and press OK to enter.

• Auto Get IP Address: automatically acquire the IP address.

• Manual Set IP Address: Press ▲/▼to select IP address, Subnet Mask, Gateway or DNS Address in the

menu. Press OK to display a soft keyboard for editing. After editing, press

to return Manual Set IP Address

menu. Press OK in the menu toconrm.

Press

to return and press Home to exit.

ADSL Dial-up

Select

Settings > Network Settings

> ADSL Dial-up and press OK to enter. At that time, a dialog box will pop up.

Type in your User Name and Password, select Connect and press OK to set up the connection.

Network Connection Guide

Select Settings > Network Settings > Network Connection Guide, press OKtoenter.Use◄/►andOK on the

remote control to operate according to the TV prompt.

General Operation

Wireless Router

Modem

TV Set

3. Use the Network SettingstoconguretheTV.

Note:

Some models may have internal wireless module,

then the wireless USB Adapter is unnecessary. Some

external wireless adapters can’t be compatible with the

TV.

Built-in wireless

connection

Chapter 3 Menu Operation

Menu Display

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Figure 8

Figures and illustrations are provided for reference only and may differ from actual product appearance.

Using Home Menu

Note: Figures and illustrations in this User Manual are

provided for reference only and may differ from actual

product appearance. And for some models, certain

options are not available.

Press Home on the remote control to open the Home

menu.Press▲/▼/◄/►toselecticonsfromthescreen

list. Press OK to enter each option. To exit the menu,

press

or Home. (see Figure 1&2)

Press MENU,asubmenuwillpopout.Press◄/►to

select an item and press OKtoconrm.

Edit Homepage: Press OK to enter, you can move or

edit plate according to your favorites.

Move:movetheboardofHomemenu.Press◄/►to

select an item and press OKtoconrm.

Edit Plate: press OK to enter, then press ▲/▼/◄/►

to select an item on top right, and press OK to add

the icon to the board, a tick will display on the icon

you choose. Press OK again to delete the icon from

the board, the tick on the icon was gone.

Note: The pre-installed icons or apps can’t be deleted.

Set Wallpaper: change the wallpaper of Home menu.

Press

to exit the submenu.

On Home menu, there are 4 boards: Recommendation,

Entertainments, Utility and Custom Fields. The

preinstalled icons and apps are listed on certain board.

You can change the items' location according to your

favor, and add new items from internet.

Note: The pre-installed icons or apps cannot be deleted.

Note: The icons (regardless of order) listed here may

differ from actual product. For some models, certain

icons are not available. And more local apps may be

installed according to sales market for some models.

WARNING:

• Congurethenetwork settings before using Smart TV.

• Slow responses and/or interruptions may occur,

depending on your network conditions.

• If you experience a problem using an application,

please contact the content provider.

• According to circumstances of the contents provider,

an application’s updates or the application itself may

be discontinued.

• Depending on your country’s regulations, some

applications may have limited service or not be

supported.

■

Recommendation

All Apps

A shortcut to all apps. Press OK to enter and you will

ndallinstalledappshere.

App Store

Provide many useful and amusing apps. After entering,

you can see the recommended excellent apps. Press

▲/▼/◄/►toselect,pressOK to enter. You can see

the menu of App Store including Categories, My Apps,

Installation Required, Search, and User center on the

top of the screen, and New app, Hot, and All playing in

the middle.

Facebook

TV client of Facebook social application. After clicking

the icon and entering the application, you can browse

contents and communicate online via the TV.

TV Tweets

It is a social networking and micro-blogging service

provider. Via TV Tweets client, you can browse,

communicate with friends, post and update web

contents.

Note: Please refer to Settings> Select Time Zone

to select the time zone according to your location first

before using TV Tweets.

You Tube

You can view a variety of videos online.

Note: Please refer to Settings> Select Time Zone

to select the time zone according to your location rst

before using You Tube.

Frontline Commando: D Day

Frontline Commando: D-Day is a freemium 3D action

game based on the scenario of the Normandy landings

in WWII. You need a game console to play this game.

Browser

It’s an internet browser. You can browse webpage by

typing in URL or click network links.

•

Congure the network settings before using Browser.

nScreen

Please download and install the client software of

TCL nScreen software to your smart phone running

Androidrst,thenopentheclientsoftwareandoperate

according to the prompt on the smart phone and the

screen of TV.

Include Media Sharing, Remote Control and Help.

Media Sharing: After a smart phone/pad is

connectedtotheTV,photo,videoormusiclescan

be sent to the TV and played on it.

Remote Control: Smart phones can be used as

a remote control unit to operate TV after they are

connected to the TV via wireless network.

Help: Brief introduction about the features and usage

of functions under nScreen.

Note: To use the function, the smart TV and smart

phone should be connected to the same wireless

network. Some smart phones and Android systems

won't be supported.

■

Entertainments

Eternity Warriors 2

Eternity Warriors 2 is a kind of explosive action Role-

playing game. You need a game console to play this

Menu Operation

game.

Riptide GP

Riptide GP is a kind of Water motorboat game. You

need a game console to play this game.

■

Utility

Gesture Control

By simple hand movement, you can perform some

basic operations of TV like “OK”, “Return” and “Move”

etc. In some games, you can control your role in this

way. Operate in accordance with the prompts from the

wizard, you can experience TV control via gestures.

TCL Voice

Use voice to operate the TV. By inputting voice through

a voice-activated remote control, the TV will perform the

related tasks. For details, refer to relevant introductions

about this app on the screen.

Note: The voice-activated remote control is not a

standard accessory, you may need to buy separately.

You are recommended to buy TCL RC520 remote

control. This function is not available for all models.

Face Recognition

Press On button to activate face recognition function.

When you leave, TV will enter energy saving mode(On/

OfforOnly-Listen)afteraspecictime.

Function Switch: On, Off.

Saving Mode: On-Off, Only-Listen.

Start Time: You can choose the time to start face

recognition, 5 s, 1 min, 5 min,10 min.

T-cast

T-cast is a new function which integrates Wireless

Direct and MHL. You can use nScreen function through

Wireless Direct without Router, and enjoy sharing the

contentofyourmobilephoneonthehighdenitionand

large screen display TV via MHL.

Note: T-cast is not available for certain TV models. And

for some models, certain option (Wireless Direct) is not

available.

TV Guard

System management application including TV Checkup,

One Key Install, System Info., Startup Optimizer,

Memory Manager, Network Manager, Software

Manager, Security Protection, File Manager and

Settings.

TV Checkup: detect the tasks and apps, optimize

system.

One Key Install: select and install apps.

System Info: display the system status, SW version

etc.

Startup Optimizer: optimize startup speed.

Memory Manager: memory space management and

settings.

Network Manager: internet related app management.

Software Manager: app backup, update, move etc.

Security Protection: enable or disable apps.

File Manager: browseles.

Settings: change the settings of TV Guard.

Menu Operation

File Explorer

Access pictures, music, andvideolesintheexternal

storage device that is connected with the smart TV.

HomeCloud

HomeCloud includes photos, videos, music, documents

etc. You can download the client software of Home

Cloud app from App store, Google Play Store or the

URL http://life.tcl.com/download.html, and install it on

your mobile phone, computer, and pad.

Help

On-screen instruction manual of the TV. Press OK to

learn more detailed illustration.

Note: You may need a webcam to achieve some of the

above functions, e.g, Face Recognition and Gesture

Control. Webcam is not a standard accessory, you may

need to buy one seperately. Some external devices

like webcam, smart phone, game handle and external

wireless adapter may not be supported.

■

Custom Fields

Press OK in empty areas to add your favourite apps.

Using Left Home Menu

Note: Some of the functions may be unavailable in

certain sources. And for some models, certain options

are not available.

Press Home on the remote control to open the Home

menu. On the left of the screen, you can see the system

menu, including Source, Media, Settings and Message

Box (see Figure 1). Press▲/▼/◄/►toselectandpress

OK to enter each option. To exit the menu, press

Home.

■

Source

Include ATV, DTV, AV, YPBPR, HDMI1, HDMI2, HDMI3

and PC.Press▲/▼/◄/►toselectyourdesiredsource,

and then press OKtoconrm.

Note: Source available may differ depending on the

model.

■

Media

A shourtcuttomultimediales.Itallowsyoutoenjoythe

videos, pictures and music in the storage device (SD

card or U-disk).

■

Settings

Include the following options (see Figure 7):

Picture Settings:Press◄/►tosetPicutre Mode,

Backlight, OSD Backlight and Nature Light.

Auto Source: Includes Manual, Auto and Close.

Press◄/►toselectwhatyouwant.

Sound Settings: You can adjust the mode of SPDIF,

Smart Audio, Volume, Balance, Smart Volume and

Scenebypressing▲/▼/◄/►.

Network Settings:Press▲/▼buttontoselect

Wireless Settings, Wired Settings, ADSL Dial-up,

Menu Operation

EPG: It is an on-screen guide that displays scheduled

TV programs. You can navigate, select and view

programs. Press MENU on the remote then select EPG

or press EPG on the remote control to enter. The Now

and Next EPG menu will appear, which allows you to

get information about the current or following programs

playing on each channel. Press EPG or

on the

remote control to exit EPG and switch to the selected

channel.

Note: EPG is only available for digital channels.

TV Setting: Press OK to enter TV Setting. Use ▲/▼

select the options below:

Picture: Press OK to access itssubmenu.Press▲/▼

to choose one option, and press OKthenuse◄/►to

edit. Press

to return.

- Picture Mode: User, Normal, Vivid and Mild.

- Backlight: 0~100

- Color: 0~100

- Picture Size: 16:9, 4:3, Auto. Some modes may not

be available under some sources and unable to be

selected.

- View: Full, Normal.

- Nature Light: Normal, Dynamic, Off.

- Picture Type: Auto, Video and PC (only available

under HDMI source)

- Professional Setting:

Brightness: 0~100

Contrast: 0~100

Sharpness: 0~100

Tint: 0~100 (only available in NTSC system)

Col.Temp: Cold, Warm, Normal.

GAMMA: -4~4

DCC: On, Off.

Sound: Press OK to access its submenu. The options

are as follows:

- SPDIF: AUTO, PCM,OFF

- Smart Audio: Normal, Music, Movie, News

- Volume: 0~100

- Balance: -50~50

- Smart Volume: On, Off.

- Scene: Desk, Wall.

Channel Manager: Hide or move the channel you

select; change the channel display sequence on the

channel list.

Scan: Press OK to access options of scan: Auto Scan,

Manual Scan, Fine Tune. For details, please refer to

Channel Scan on page 8.

VGA: Press ▲/▼to select Auto Adjust, H.Position,

V.Position, Sampling Clock and Phase Adjust.

Note: VGA is only available under PC source.

DTV Setting:

Note: DTV Setting is only displayed on screen under

DTV source.

Network Connection Guide, and press OK to enter.

For details, please refer to Network Settings on

page 9.

System Update: Includes System Software Update,

Factory Default and System Repair.

- System Software Update: This function allows you

to download and update software.

- Factory Default: Press OK to enter, select and

conrmtorestorethesettingtothefactorydefault.

- System Repair: Press OK to enter, select and

conrmtorepairthesystemifitisnotfunctioning

properly.

System Information: It is used for checking the

device number and software version, etc.

Advanced Settings: Select this item to set

Language, Sleep Timer, Input Method and

Location.

Select Time Zone: Press OK to enter, press ▲/▼ to

select time zone according to your location.

■

Message Box

Display Huan Notice in the Message Box, press OK to

enter.

Using TV Menu

The instructions below introduce how to operate and

access the main menu of the TV with the remote control.

Note: Some of the functions may be unavailable in

certain input sources. And for some models, certain

options are not available.

To access the menu system:

1. Press MENU on the remote control during video

display to open the TV menu (see Figure 8).

2. Press the

◄/►toselectthedesireditem,thenpress

OK to enter the submenu.

3. Press

to return.

Sound:Press▲/▼toselectoptions.PressOK to

conrm,andpress

to return.

Effect: Normal, Music, Movie, News

Format: DK, BG, I, M (only available for analog

channels)

Track: Stereo, Left Channel, Right Channel (only

available for digital channels)

SPDIF: AUTO, PCM, OFF

Picture:Press▲/▼toselectPicture Mode and

Picture Size and press OKtoconrm.Press◄/►to

select the option you like.

3D: Press ▲/▼tocongureyour3Dfunction.For

details, refer to Viewing TV Using the 3D Function on

page 14.

Channel:Press▲/▼toselectachannelasthecurrent

program you want to watch, and press OKtoconrm.

Press

to return to the previous menu.

Note: Channel information is only available when

channel search is implemented.

Source:Press▲/▼andthenOK to select an input

source.

Menu Operation

DTV Settings

Subtitle and Audio

PIN Setting

Parental Control

Over-The-Air Upgrade

PVR Setting

Press OK to display the menu items.

- Subtitle and Audio: Press ▲/▼to select an item

anduse◄/►tochoosethesubtitleandaudio

language.

- PIN Setting: Use the number buttons to enter the

four-digit number password to enter the PIN setting.

You can change the password on the submenu, it

affects the password in PIN Setting and Parental

Control.

Change PIN: this option allows you to change the

password. Press the number button to enter the

new password and re-enter it again to confirm.

Reset PIN: this option allows you to

delete the password you set and restore

to the factory default password 1234.

- Parental Control: Use the number buttons to enter

thefour-digitnumberpassword.Thenuse◄/►to

adjust the rating. The password must be entered

before continuing with Parental settings next time.

Notes:

- Please remember the personal PIN code you set.

- You must enter your personal code before entering

the PIN Setting and Parental Control menu. The

default password is 1234. The super password

is 0423. If you forget your code, enter the super

password to override any existing codes.

- When the current channel is locked, you can press

OK and enter the password to enter.

- Over-The-Air Upgrade: Enables you to search

for and install the latest version of the software if

available from the broadcast.

Note: This feature may not be supported depending

on the adaptation of your local broadcaster.

- PVR Setting:Allows you to record the TV

programme so that you will not miss the favourite

part even if you go out. Before you use the function,

connectaUSBstoragedevicetotheTVrst.For

thersttime,youshoulddothedisksetupforthe

USB storage device.

Note: This feature is available only in selected

products and, due to specific TV network limitations

and country technical requirements, might not be

available in product or place of installation. This

feature might also be blocked by TV network due

to copyright protection (HD content, recording

protection).

Select Disk: this option allows you to select the disk

for time shift .

TimeShift Size: this option allows you to select the

size for time shift

TimeShift OnOff: Press◄/►toselectOntoswitch

on the time shift function. Also can use

■ ●

button

on the remote control and select , then press OK to

confirm and

follow the directions on the screen to

do the setup.

Notes:

- Before you connect the USB storage device to the

TV, make sure you have backed up the data in the

drive to avoid the loss of your important data due

to unforeseen malfunction.

- We recommend you use a USB storage device

with free capacity above 1GB and disk speed faster

than 5.0MB/sec.

- The bigger the USB storage device free memory

for time shift, the bigger the recording length.

- If you change the channel in time shift mode, a

message prompts you to select Yes or No. You

can select Yes to exit the time shift function and

execute the channel change.

Smart TV IME

This TV product uses Smart TV IME (Input Method

Editor). The soft keyboard will be displayed on screen

when you begin to input. Press ▲/▼/◄/►tohighlight a

key, and press OK to input. Highlight the Shift key, and

then press OK to type one uppercase letter. For caps

lock, highlight the Shift key and double-press OK, you

can then type uppercase until you shift again.

Special Function

Viewing TV Using the 3D Function

Warnings:

- Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea and

headaches. If you experience any such symptom,

stop viewing 3D TV, remove your 3D glasses and

rest.

- Watching 3D images too closely or for a long period

of time may harm your eyesight.

- A responsible adult should frequently check on

children who are using the 3D function.

- Do not use the 3D glasses for any other purpose

than viewing 3D images on a 3D TV.

- Do not use the 3D function or 3D glasses while

walking or moving around, otherwise it may result in

injuries due to running into objects, tripping, and/or

falling.

Note: 3D function is not available for some models.

To fully enjoy the 3D effect, please follow the steps below:

1. Press MENU on the remote control.

2. Select 3D and press OK to enter.

3. Use ▲/▼ to select the right format (2D-to-3D, Side-

- OK to start recording, the record file is put into a

folder named after the channel number under the

PVR folder in Media center > Video;

- ▲/▼/◄/►toadjusttherecordingduration.

- the

●

on the screen to stop recording manually;

in normal operation, the recording will stop

automatically when the recording duration has

passed.

3. In recording, PVR mini pane will also show on the

screen to indicate the recording progress.

4. To watch the recorded programme, exit PVR mode

first and go to Media center > Video. Select the

folder PVR, then select the related record file. Press

OK to play. (It is the same if you record a digital

radio programme).

Notes:

- This feature is available only for non encrypted

digital channels. Even when CICAM (CI or CI+) is

inserted, this feature is not available on encrypted

channels.

- Supports USB storage devices of FAT32 & NTFS

format.

- Before you connect the USB storage device to the

set, make sure you have backed up the data in the

drive to avoid the loss of your important data due

to unforeseen malfunction.

- The bigger the USB storage device free memory

for the PVR function, the bigger the recording

length.

- If you want to change channel or signal source

during recording, store the recording data before

changing the channel or source.

- The set cannot play files normally if the parameters

of the file exceed the limitations of the system, the

file format is not supported, the file is damaged, or

the file cannot be decoded.

- Do not disconnect the USB storage device when

the system is reading a file or transmitting data,

otherwise the system or the device may be

damaged.

By-Side, Top-and-Bot, Line Interlace, Frame

Sequence) and press OK to confirm.

Note: Some 3D formats may not be available

depending on the format of the image source. 3D

mode is not supported under VGA source.

4. Wear the 3D glasses and enjoy the 3D effect.

Note: For those models using bluetooth 3D glasses,

please refer to the user’s guide of 3D glasses.

5. When the 3D movie is playing under non-USB

sources, press MENU, select 3D > More 3D Setting,

and press OK to bring up a menu for adjusting the

3Deffect.Press▲/▼/◄/►toselectandchange

settings, and press

to return. The options of 3D

effect are as follows:

• 3D Mode: 2D-to-3D, Side-By-Side, Top-and-Bot,

Line Interlace, Frame Sequence, Off.

• Switch L

R: On, Off.

• Depth: -10~10

• 3D to 2D: Left, Right, Off.

• Auto Mode: On, Off.

6. To exit 3D mode, press MENU, select 3D > Exit 3D,

and then press OK.

PVR (Personal Video Recorder)

Allows you to record non encrypted TV programmes.

Before you use the function, connect a USB storage

devicetothesetrst.

Note: This feature is available only in selected products

and, due to specific TV network limitations and

country technical requirements, might not be

available in product or place of installation. This

feature might also be blocked by TV network due

to copyright protection (HD content, recording

protection). Please use

■ ●

on the remote

control to check if this feature is available in your

product.

1. Press

■ ●

on the remote control and select

●

2. Press:

Chapter 4 Other Information

1. Fail to link the network.

- Check if your TV is connected with the network;

- Reboot your TV;

- Consultyourinternetserviceprovidertoconrm

if access of your router is supported. Refer to the

operation manual of your router.

- Make sure your TV is connected to a router, and

make sure your router is powered on. Check that

your router/modem has an internet connection, and

that your Ethernet cables/wireless connection is OK.

Test your connection with a computer to make sure it

is OK. Should the problem persist, contact customer

service.

2. The video could not be played smoothly.

- VideosfromyourUSBashdrive---Itmayresult

fromdatatransmission,oritscodeowisfarbeyond

the supported formats of this TV set.

- Videos downloaded from internet, or online videos.

a. It may be caused by the lower bandwidth of your

network. A high network speed is required to

handle online videos.

b. Peak internet usage times may affect the

bandwidth.

c. Check if any other computers on the same network

are also operating, as they may be using up

bandwidth. Especially if they are downloading or

playing online videos.

d. The video may be not smooth itself, it is not the

problem of your TV or network.

3. When two mobile hard disks are connected

with the TV at the same time, they will not be

recognized some times.

- All mobile hard disks consume a lot of power,

which may result in power supply problems. We

recommend inserting only one hard disk, or a low

power consumption mobile hard disk.

4. The video from a mobile hard disk (USB) is

playing with no sound.

- The audio format of the video in your mobile hard disk

is not supported by the TV player.

5. Some videos fail to play.

- The formats of the videos may not be supported

by the TV, especially videos shot by certain kinds

of cameras, generally with their private protocol of

formats, which are not compatible with your TV.

6. Video stops playing midway.

- Mistakes may occur when videos are copied or

compressed, so they may automatically stop playing

during playback.

7. What should I pay attention to, when I do SW

updating?

- No power cuts when SW is updating;

- Avoid any operations with your remote control when

SW is updating;

- Depending on your internet connection speed, the

software updating process may take some time.

8. There are no distinct changes of TV interface after

SW updating.

- Under certain conditions, SW updating may not only

update or add new functions but also improve the

performance of the TV set, without distinct changes

to the user interface. Also, there may be no changes

to the user interface at all.

Problems & Solutions

Note: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-network

functioned TV models can simply ignore them.

Troubleshooting

Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.

No picture, no sound

1. Check if the fuse or circuit breaker is working.

2. Plug another electrical device into the outlet to make

sure it is working or turned on.

3. Power plug is in a bad contact with the outlet.

4. Check the signal source.

No color

1. Change the color system.

2. Adjust the saturation.

3. Try another channel. Black-white program may be

received.

Remote control does not work

1. Change the batteries.

2. Batteries are not installed correctly.

3. Main power is not connected.

No picture, normal sound

1. Adjust the brightness and contrast.

2. Broadcasting failure may happen.

Normal picture, no sound

1. Press the VOLUME UP button to increase volume.

2. Volume is set to mute, press the Mute button to

restore sound.

3. Change the sound system.

4. Broadcasting failure may happen.

Unorderly ripples on the picture

It is usually caused by local interference, such as cars,

daylight lamps and hair driers. Adjust the antenna to

minimize the interference.

Blank screen in VGA mode

Perhaps the TV can not recognize the resolution set

by the PC. Suggest to change to the best resolution or

other standard resolutions of the Windows system.

Snowy dots and interference

If the antenna is located in the fringe area of a television

signal where the signal is weak, the picture may be

marred by dots. When the signal is extremely weak, it

may be necessary to install a special antenna to improve

the reception.

1. Adjust the position and orientation of the indoor/

outdoor antenna.

2. Check the connection of antenna.

3. Fine tune the channel.

4. Try another channel. Broadcasting failure may

happen.

Ignition

Black spots or horizontal streaks appear, or the picture

uttersordrifts.Thisisusuallycausedbyinterference

from car ignition system, neon lamps, electric drills, or

other electrical appliance.

Ghost

Ghosts are caused by the television signal following

twopaths.Oneisthedirectpath,theotherisreected

from tall buildings, hills, or other objects. Changing the

direction or position of the antenna may improve the

reception.

Radio frequency interference

This interference produces moving ripples or diagonal

streaks, and in some case, loss of contrast in the picture.

Find out and remove the radio interference source.

* Figures and illustrations in this User Manual are

provided for reference only and may differ from actual

product appearance. Product design and specications

may be changed without notice.

Other Information

72-RT95HB-EAPAA

TCL LED49E5700UDS Operating instructions

Brand: TCL

Model: LED49E5700UDS

Category: LCD TVs

Type: Operating instructions

This manual is also suitable for

Download PDF

report

TCL LED49E5700UDS Operating instructions

This manual is also suitable for

TCL LED49E5700UDS Operating instructions

Related papers

Other documents