Sonance Virtuoso
®
DR-Series
8” In-Ceiling Speakers
SPECIFICATIONS
V834DR
Tweeter: 1" (25mm) Beryllium Dome, Ferrofluid cooled,
pivoting
Midrange: 4" (102mm) Beryllium cone, rubber surround,
pivoting
Woofer: 8" (203mm) Beryllium cone, rubber surround,
pivoting
Frequency Response: 30Hz – 20kHz ±3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 Watts minimum; 175 Watts maximum
Sensitivity: 91dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 11¼" (286mm) x 6" (152mm)
Cutout Diameter: 10
1
/8" (257mm)
Shipping Weight: 22 lbs. (10kg) Pair
V833DR
Tweeter: 1" (25mm) Silk dome, Ferrofluid cooled, pivoting
Midrange: 4" (102mm) Carbon Fiber cone, rubber
surround, pivoting
Woofer: 8" (203mm) Carbon Fiber cone, rubber
surround, pivoting
Frequency Response: 32Hz – 20kHz ±3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 Watts minimum; 150 Watts maximum
SPL: 91dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 11¼" (286mm) x 6" (152mm)
Cutout Diameter: 10
1
/8" (257mm)
Shipping Weight: 20 lbs. (9kg) Pair
V832DR
Tweeter: 1" (25mm) Silk dome, Ferrofluid cooled, pivoting
Midrange: 4" (102mm) Polypropylene cone, rubber
surround, pivoting
Woofer: 8" (203mm) Polypropylene cone, rubber
surround, pivoting
Frequency Response: 38Hz – 20kHz ±3dB
Impedance: 8 Ohms nominal; 6 Ohms minimum
Power Handling: 5 Watts minimum; 125 Watts maximum
Sensitivity: 90dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter level (±3dB)
Dimensions (Dia. x D): 11¼" (286mm) x 6" (152mm)
Cutout Diameter: 10
1
/
8" (257mm)
Shipping Weight: 20 lbs. (9kg) Pair
V831
DR
Tweeter: ¾" (19mm) Silk dome, Ferrofluid cooled, pivoting
Midrange: 4" (102mm) Polypropylene cone, rubber
surround, pivoting
Woofer: 8" (203mm) Polypropylene cone, rubber
surround, pivoting
Frequency Response: 45Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 Watts minimum; 100 Watts maximum
Sensitivity: 89dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: None
Dimensions (Dia x D): 11¼" (286mm) x 6" (152mm)
Cutout Diameter: 10
1
/8" (257mm)
Shipping Weight: 16 lbs. (7.3kg) Pair
continued on other side
Sonance Virtuoso
®
DR-Series In-Ceiling Speakers
The totally-redesigned Sonance Virtuoso® DR-Series speaker line
takes in-ceiling speaker performance and technology to a higher
level, while making installation faster and easier than ever before.
All new Virtuoso DR-series speakers incorporate advanced
driver materials and technology that give them stunning
musical performance. Eight-inch diameter woofers deliver the
kind of deep, powerful bass more commonly found in audio-
phile free-standing speakers. The fully-pivoting woofer assembly
and exclusive pivoting Sonic Eye® midrange/tweeter assembly
direct sound at listeners, producing superior stereo performance
even when mounting restrictions require less-than-ideal
speaker placement.
Features:
• Completely redesigned for 2006 with dramatically improved
sound quality and quicker/easier installation.
• Fully-pivoting woofer assembly and pivoting Sonic Eye
®
direct
sound at listeners, for life-like stereo sound even when
placement options are limited.
• Advanced driver materials deliver extremely accurate musical
performance.
• 8” Diameter woofers deliver deep, powerful bass.
• Graphite-Reinforced ABS (GRABS) woofer basket reduces
resonances.
• 3-Position tweeter adjustment switch (V843
DR, V833DR, V832DR)
and 3-position midrange adjustment switch (V834
DR, V833DR) .
• Exclusive new FastMount
®
tabs hold speaker in the mounting
hole during installation, allowing installer to let go of the speaker
to pick-up tools or other items.
• RotoLock
®
mounting system simplifies installation.
• Paintable aluminum grilles.
• VRS2 creates diffuse soundfield ideal for surround channel use.
• Optional Retrofit Enclosure reduces sound spillover from rear of
speaker into adjacent spaces.
Virtuoso V832
DR
Virtuoso V834DR
Virtuoso V833DR
Virtuoso V834
DR
Virtuoso V831
DR
VRS2
Tweeter: Two ¾" (19mm) Silk domes, Ferrofluid cooled
Midrange: Two 3" (76mm) Carbon Fiber cones, rubber
surrounds
Woofer: 8" (203mm) Carbon Fiber cone, rubber
surround, pivoting
Frequency Response: 32Hz – 20kHz ±3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 Watts minimum; 150 Watts maximum
SPL: 91dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 11¼" x 6" (286mm x 152mm)
Cutout Diameter: 10
1
/8"" (257mm)
Shipping Weight: 20 lbs. (9.0kg) Pair
DIMENSIONS
(all Virtuoso DR-Series and VRS2 speakers)
Sonance Virtuoso
®
DR-Series
8” In-Ceiling Speakers
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
www.sonance.com
®2006 Dana Innovations. Sonance, Virtuoso, Sonic Eye, RotoLock, Sonafill and FastMount are trademarks or registered trademarks of Dana Innovations. All Rights Reserved.
All features and specifications are subject to change without notice. For the latest Sonance product information go to www.sonance.com
03/06
OPTIONAL ACCESSORIES:
Virtuoso
DR
Metal Grille (part# 92290): Metal replacement for included grilles.
Virtuoso
DR
Cloth Grille (part# 92285): Cloth-covered replacement for included grilles.
Virtuoso
DR
FlexBracket (part# 92247): Plastic template to reserve a mounting hole for
the speaker in new construction. Designed to be used with the RotoLock® mount-
ing system. Note: Not for use with Architectural Finish Installation Kits.
Virtuoso
DR
Coverplate (part# 92245): Covers the hole made by the FlexBracket during
construction until the speaker is installed.
Virtuoso
DR
Acoustic Enclosure (part# 91900): ½” MDF enclosure that provides ideal
acoustic performance and maximum reduction of sound transmission into
adjacent spaces. Designed for use only in new construction.
Virtuoso
DR
Retrofit Enclosure (part# 92243): Molded enclosure that reduces sound
transmission into adjacent rooms and spaces. Can be used in both new
construction and retrofit installations.
Virtuoso
DR
Fire-Rated Back Can (part# 91908): Meets ASTM E 119 and UL2043
criteria for commercial installations.
Sonafill
®
In-Ceiling System (part# 91928): Retrofittable acoustical treatment for
in-ceiling speakers consisting of two pillows and four tiles that virtually eliminates
noise produced by resonating drywall. Dramatically improves midbass sound
quality and reduces sound transmission into adjacent rooms.
6”
10
1
/
8
”
11¼”
Virtuoso VRS2
-
1
-
2
Sonance V832DR User manual
- Category
- Loudspeakers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sonance Speaker DR-series User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Kramer Electronics SPK-CC448 Datasheet
-
PyleHome PIC8E Owner's manual
-
THX Ltd. THX Ultra II In-Wall Speakers PN. 33-3187 10.03 User manual
-
Bogen VRS2 User manual
-
Bowers & Wilkins CWM8i User manual
-
AudioSource AS5C Quick start guide
-
Eglo 92245 Datasheet
-
MK Sound IWS8 Owner's manual
-
RBH Sound IN-CEILING SPEAKERS Owner's manual
-
