2. Renkforce
  3. GBIC [1x M.2 Key A-E plug - 1x SD Card slot]

Renkforce GBIC [1x M.2 Key A-E plug - 1x SD Card slot] Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Renkforce GBIC [1x M.2 Key A-E plug - 1x SD Card slot] Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
- 1 - 2-F139PA-01A
M.2 A-E Key PCIe Base Module to Micro SD 3.0
1. Introduction
Utilize up to 2TB SD 3.0 (SDXC) Memory Card in Embedded
Motherboard M.2 A Key or E key Socket!
1.1. Features
o M.2 NGFF type 2242-D5-A-E Dual A-E Key notch 75Pin PCIe based micro
SD module
o Support up to 2TB Secure Digital Memory Card
o Micro SD socket on board
o Complies with Secure Digital Card (SD) specification up to ver. 3.0 (SDXC)
o Support SDR-104 / DDR 50.
o Support CPRM function.
o
1K bytes of ping-pong FIFO buffs the data transmission between transmitter and
receiver
o
Supports M.2 type 2230 and 2242 plated-holes
o
Supports Windows driver
o
Supports operating temperature range: -40 - 80 ºC
o
PCBA size : 42mm x 22mm
2. Installation
1. Install micro SD memory card to micro SD Socket
2. Plug and tighten M.2 A-E Key module into motherboard A Key or E Key M.2 socket
3. Power on computer and boot to Windows. Run Windows Driver Installer Program in
Driver CD folder E:\SD\ AlcorMicro_PCIE_CR
/