Wells Manufacturing WVAE-30F User manual

Type
User manual

This manual is also suitable for

Wells Manufacturing WVAE-30F is a commercial grade ventless fryer hood system designed to meet the National Fire Protection Association (NFPA) standards. It is equipped with a high-efficiency blower assembly and a charcoal filter to remove smoke, odors, and grease from the cooking area. The system also includes a fire detection and suppression system to provide an extra layer of protection in the event of a fire. The WVAE-30F is ideal for use in commercial kitchens, restaurants, and other food service establishments.

Wells Manufacturing WVAE-30F is a commercial grade ventless fryer hood system designed to meet the National Fire Protection Association (NFPA) standards. It is equipped with a high-efficiency blower assembly and a charcoal filter to remove smoke, odors, and grease from the cooking area. The system also includes a fire detection and suppression system to provide an extra layer of protection in the event of a fire. The WVAE-30F is ideal for use in commercial kitchens, restaurants, and other food service establishments.

PARTS LIST
WELLS BLOOMFIELD
A Division of Carrier Commercial Refrigeration, Inc.
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 888-492-2782
fax: 888-492-2783
www.wellsbloomfield.com
381
p/n PL381 070116 cps
SERVICE PARTS LIST
NFPA Hood System for Ventless Fryer
WVAE-30F, WVAE-55F/FS
WVPE-30F
CONTENTS
Description page
Parts List ………………………………………………….. 2
Hood Section
Hood & Cabinet Components ……………………...… 3
Vacuum & Interlock Components ……..……………. 4
Ansul© Fire Detection & Suppression ……………… 5
NOTE: For fryer section, see appropriate fryer parts list
WVAE-30F see PL361
WVPE-30F see PL362
WVAE-55F/FS see PL363
2
PART # DESCRIPTION
MECHANICAL
63948 MAGNET, PERMANENT
67080 FITTING, ELBOW 3/8 NPT BI 90º
67399 HOLDER, FUSIBLE LINK
501187 DAMPER
501435 HANDLE, FILTER
501448 BUSHING, INTERLOCK
501516 TUBE VINYL 3/16” ID x 18-1/2” LONG
501588 PAWL, INTERLOCK
502844 KIT, DRAIN RETROFIT 30LB FRYER
502849 KIT, DRAIN RETROFIT 55LB FRYER
ELECTRICAL
50516 LIGHT, INDICATOR AMBER 240V
51157 LIGHT, INDICATOR RED 240V
53068 TERMINAL BLOCK 2P (FIRE ALARM)
54005 JUMPER, FLAME SENSOR
55697 LIGHT, INDICATOR GREEN 240V
62897 CONNECTOR, WIRE 14-18 GA (pk 10)
64514 RELAY, BLDG FIRE ALARM
64834 BUZZER 240V
67273 SWITCH ELECTRIC (FIRE ALARM)
501224 BLOWER ASSY, HOOD
501238 TIMER, CUBE
501379 VACUUM SWITCH (SHUTDOWN)
501380 VACUUM SWITCH (CHANGE FILTER)
HARDWARE
51040 GROMMET INSULATION 7/8D HEYCO
51053 NUT, 8-32 KEPS SS (pk 100)
55487 SCREW, 8-32x11/16 (pk 50)
60030 RING, RETAINING .122ID (pk 10)
8043-506
NUT, 8-32 HEX ACORN
PART # DESCRIPTION
ANSUL© COMPONENTS
NOTE: Provided for reference only
All servicing of the fire detection and suppression
system must be performed by an authorized Ansul
technician
53068
TERMINAL BLOCK 2P
(no Ansul p/n)
67273 SWITCH ELECTRIC (Ansul p/n 423575)
67274
FUSIBLE LINK 450ºF Model K
(no Ansul p/n)
501378
FUSIBLE LINK 280ºF Model K
(no Ansul p/n)
501389
ASSY, PULL STATION ANSUL©
(Ansul p/n 4835)
CABLE, WIRE ROPE , 50 FT/15m
(Ansul p/n 15821)
ANSULEX® FIRE EXTINGUISHING
MEDIA, 1.5 GAL. (Ansul p/n 79694)
EXPELLANT GAS CARTRIDGE ASSY
LT-20-R (Ansul p/n 67099)
QUICK-SEAL ADAPTER, 3/8”
(Ansul p/n 77284)
QUICK-SEAL ADAPTER, 1/4”
(Ansul p/n 78195)
MOUNTING BRACKET, RELEASE
MECH. R-102 (Ansul p/n 79493)
CABLE, WIRE ROPE , 500 FT/152m
(Ansul p/n 79653)
DESIGN, INSTALLATION, RECHARGE
AND MAINTENANCE MANUAL FOR
R-102 RESTAURANT FIRE
SUPPRESSION SYSTEM (STD. UL 300
LISTED) (Ansul p/n 418087-05)
NOZZLE 1N (Ansul p/n 419335)
NOZZLE 3N (Ansul p/n 419338)
PULLEY ELBOW, COMPRESSION
ENDS (Ansul p/n 423250)
TANK, 1.5 GAL ANSULEX®
(Ansul p/n 429864)
67399
HOLDER, FUSIBLE LINK
(no Ansul p/n)
QUICK-SEAL ADAPTER, COMPRESS.
1/2” CONDUIT
(Ansul p/n 79152)
PART # DESCRIPTION
OPTIONAL ACCESSORIES
22402 FILTER, HEPA
22403 FILTER, CARBON
22695 FILTER, GREASE
LITERATURE & DOCUMENTATION
300007 OpMANUAL WFAE-55F/FS
301412 WIR DIAG WVPE-30F
301413 WIR DIAG WVAE-30F
301466 WIR DIAG WVAE-55FS
301584 WIR DIAG WVAE-55F
301603 OpMANUAL (Supp) NFPA HOOD
301626 OpMANUAL WFPE-30F
301669 OpMANUAL WFAE-30F
PL381 Parts List for NFPA Hood
3
PL381 Parts List for NFPA Hood
CABINET AND HOOD SECTION COMPONENTS
LIGHT, SIGNAL
AMBER 50516
LIGHT, SIGNAL
RED 51157
LIGHT, SIGNAL
GREEN 55697
FILTER, CHARCOAL
22403
FILTER, HEPA
22402
HANDLE, FILTER
501435
GREASE BAFFLE
22695
SEE PAGE 4
VACUUM AND
INTERLOCK
COMPONENTS
FUSIBLE LINK 280ºF
TYPE K 501378
HOLDER, FUSIBLE
LINK 67399
FUSIBLE LINK 450ºF
TYPE K 67274
(LOCATION VARIES
BETWEEN FRYER
MODELS)
GREASE CUP
501189
SEE PAGE 5
ANSUL® COMPONENTS
SEEPAGE4-VACUUM AND
INTERLOCK COMPONENTS
DAMPER ASSY
501187
BLOWER ASSY
501224
NOTE: For fryer section, see appropriate fryer parts list
WVAE-30F see PL361
WVPE-30F see PL362
WVAE-55F/FS see PL363
4
VACUUM AND INTERLOCK SYSTEM COMPONENTS
PL381 Parts List for NFPA Hood
GREASE BAFFLE
HEP
A FILTER
VACUUM SWITCH
REPLACE FILTER
501380
VACUUM SWITCH
SHUTDOWN
501380
BLOWER ASSEMBLY
501731
RETAINER RING
.122 ID 60030 (pk 10)
SWITCH, PROXIMITY
501409
MAGNET, PERMANEMT
63948
BUSHING
501448
PAWL, INTERLOCK
NFPA 50158HOOD
QUICK-SEAL ADAPTER, 1/4”
(Ansul p/n 78195)
TUBE VINYL
3/16” ID x 18-1/2” L
501516
5
FIRE DETECTION AND SUPPRESSION SYSTEM COMPONENTS
FOR USE ONLY BY AUTHORIZED
ANSUL© SERVICE PERSONNEL
Refer to Ansul© part no. 418078-05
R-102 Restaurant Fire Suppression
System Design, Installation,
Recharge and Maintenance
ASSY, PULL STATION
ANSUL© 501389
ANSUL© p/n 77284
DETAIL
inside
outside
cabinet wall
Seal with
Teflon tape
Seal with
Teflon tape
Fiber
washer
is always
on the inside
ref. MOUNTING BRACKET
RELEASE MECHANISM
R-102 ANSUL© p/n 79493
(NOT SHOWN)
MICROSWITCH 67273
TERM.BLOCK 53068
(NOT SHOWN)
CARTRIDGE LT-20-R
ANSUL© p/n 67099
FUSIBLE LINK 280ºF
MODEL K 501378
FUSIBLE LINK 450ºF
MODEL K 67274
(LOCATION DIFFERS
BETWEEN FRYER
MODELS)
ref. CABLE, WIRE ROPE
ANSUL© p/n 15821 (50’/15m)
79653 (500’/152m) (typical)
(NOT SHOWN)
ANSULEX ® EXTINGUISHING
AGENT 1.5 GAL.
ANSUL© p/n 79694
ref. TANK 1.5 GAL ANSULEX®
ANSUL©p/n 429864
ref. NOZZLE 1N
ANSUL© p/n 419335
ref. NOZZLE 3N
ANSUL© p/n 419338
ref. PULLEY ELBOW
ANSUL© p/n 423250
(typical)
ref. ADAPTER, QUICK-SEAL 3/8”
ANSUL© p/n 77284 (typical)
FRONT OF UNIT
ANSUL© p/n 423250
DETAIL
Cable sits in
groove in
pulley
inside
outside
Fiber
washer
is always
on the inside
conduit
wall of fryer
Conduit passes completely
through the fitting, and is
sealed with the compression
washer and nut
ANSUL© p/n 79152
DETAIL
ref. ADAPTER, QUICK-SEAL
1/2” CONDUIT ADAPTER
ANSUL© p/n 79152 (typical)
HOLDER, FUSIBLE
LINK 67399
PL381 Parts List for NFPA Hood
Genuine Parts
Protect - YOU - All - Ways
SERVICE TRAINING - QUALITY SERVICE
SERVICE TRAINING - QUALITY SERVICE
CUSTOMER SATISFACTION
CUSTOMER SATISFACTION
WELLS
Commercial Food Equipment Service Association
Wells Manufacturing proudly supports CFESA
Commercial Food Equipment Service Association
PRINTED IN UNITED STATES OF AMERICA
WELLS BLOOMFIELD
A Division of Carrier Commercial Refrigeration, Inc.
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 888-492-2782
fax: 888-492-2783
www.wellsbloomfield.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Wells Manufacturing WVAE-30F User manual

Type
User manual
This manual is also suitable for

Wells Manufacturing WVAE-30F is a commercial grade ventless fryer hood system designed to meet the National Fire Protection Association (NFPA) standards. It is equipped with a high-efficiency blower assembly and a charcoal filter to remove smoke, odors, and grease from the cooking area. The system also includes a fire detection and suppression system to provide an extra layer of protection in the event of a fire. The WVAE-30F is ideal for use in commercial kitchens, restaurants, and other food service establishments.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI