Naxa NCA-613
The Naxa NCA-613 is a versatile audio device that combines a CD player, AM/FM radio, and Bluetooth connectivity in a compact and portable design. With its built-in speakers, you can enjoy your favorite music, podcasts, or audiobooks anywhere you go.
Key Features:
- CD player with playback and programming functions
- AM/FM radio with digital tuning and preset stations
- Bluetooth wireless technology for streaming audio from compatible devices
- LCD display for easy navigation and track information
- Headphone jack for private listening
- AUX input for connecting external audio sources
Naxa NCA-613
The Naxa NCA-613 is a versatile audio device that combines a CD player, AM/FM radio, and Bluetooth connectivity in a compact and portable design. With its built-in speakers, you can enjoy your favorite music, podcasts, or audiobooks anywhere you go.
Key Features:
- CD player with playback and programming functions
- AM/FM radio with digital tuning and preset stations
- Bluetooth wireless technology for streaming audio from compatible devices
- LCD display for easy navigation and track information
- Headphone jack for private listening
- AUX input for connecting external audio sources
SUPPORT
If you have problems with your device, please consult the instructions in this
manual. Please also visit us on the web at www.naxa.com to get up to the
minute news, alerts, and documentation for your device. For additional
assistance, please contact Naxa Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/supportcenter/
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION ON MODIFICATIONS
Any changes or modifications not expressly approved by the grantee of
this device may void the authority granted by the FCC to operate the
equipment.
1. Cover plate
Press the VOL/SEL button (3) four times. Adjust the sound balance between the front
and rear speakers by turning the knob.
Press the MUTE button (4) to disable the sound temporarily. Press it again to restore the sound
to its previous volume level.
Long-press the VOL/SEL button (3) for several seconds to select the following functions; each
long-press will cycle to the next function.
When one of these functions is selected, turn the knob to adjust the function options. For example,
when DSP OFF ON is selected, you can turn the knob to change the DSP mode (Flat, Classic,
Pop, Rock); then press the VOL/SEL button to confirm the DSP mode.
ESP mode: When ESP is selected, turn the knob to change between setting ESP to 12 or 45
seconds; then press the VOL/SEL button to confirm.
BEEP mode: When BEEP is selected, turn the knob to change between ON or OFF; then press the
VOL/SEL button to confirm. When set to on, each press of the keypad will emit a beep.
VOL LAST/ADJUST: When VOL LAST/ADJUST is selected, turn the knob to change between LAST
or ADJUST; then press the VOL/SEL button to confirm. When set to LAST, the unit will remember
the volume level when you turn it off and restore it the next time you turn it on. When set to ADJUST,
you will have to adjust the volume level again each time you turn the unit on.
SEEK mode: When SEEK is selected, turn the knob to change between SEEK 1 and SEEK 2; then
press the VOL/SEL button to confirm. This changes the behavior of the SEEK button when
scanning for radio stations. When SEEK 1 is selected, the unit will automatically stop at the first
detected radio station when you press the SEEK button. When SEEK 2 is selected, the unit will
not stop scanning if you long-press the SEEK button; it will continue to scan until you release
the button.
The LED (8) will flash when ACC is on and the front panel is detached from the main unit.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Naxa NCA-613
The Naxa NCA-613 is a versatile audio device that combines a CD player, AM/FM radio, and Bluetooth connectivity in a compact and portable design. With its built-in speakers, you can enjoy your favorite music, podcasts, or audiobooks anywhere you go.
Key Features:
- CD player with playback and programming functions
- AM/FM radio with digital tuning and preset stations
- Bluetooth wireless technology for streaming audio from compatible devices
- LCD display for easy navigation and track information
- Headphone jack for private listening
- AUX input for connecting external audio sources
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
