Greenlee 52024977 Trailer Hitch Mount for UT2 User manual

Type
User manual
INSTRUCTION MANUAL
52024998 © 2006 Greenlee Textron Inc. 6/06
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
52024977
Trailer Hitch Mount
for UT2
Greenlee / A Textron Company 2 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
52024977 Trailer Hitch Mount for UT2
Wear eye protection when using this
tool.
Failure to wear eye protection could
result in severe eye injury from
flying debris.
Read and understand all of the
instructions and safety information in
the manual accompanying the UT2
Cable Pulling System before using
the UT2 cable puller.
Failure to observe this warning could
result in severe injury or death.
Insert the UT2 puller head into the hitch mount (4) and attach it with the hitch pin (5). Loosen the wing
nut and pivot it up to 90° from horizontal until it is oriented in the direction to be pulled from (6).
Retighten the wing nut to hold the assembly in position.
Make sure that there is sufficient clearance to pivot the puller into alignment without contacting any
obstructions. Do not rest the puller or hitch mount on any supports while pulling.
USA 800-435-0786 Fax: 800-451-2632
815-397-7070 Fax: 815-397-1865
Canada 800-435-0786 Fax: 800-524-2853
International +1-815-397-7070 Fax: +1-815-397-9247
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
An ISO 9001 Company
Greenlee Textron Inc. is a subsidiary of Textron Inc.
www.greenlee.com
Trailer Hitch Mount Instructions
4 5 6
Insert the trailer hitch mount into a 2" hitch receptacle (1), and attach it with the hitch pin and clip (2).
Tighten the wing nut to hold the hitch mount in place (3).
1 2 3
KEEP THIS MANUAL
  • Page 1 1
  • Page 2 2

Greenlee 52024977 Trailer Hitch Mount for UT2 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI