CYP AU-D820S Owner's manual

AU-D820S

8 x 20 Digital Audio Switch and Distribution Amplifier

The AU-D820 allows the user to switch and distribute 4 Digital Coaxial inputs and 4 Digital Optical audio inputs to

10 Digital Coaxial and 10 Digital Optical outputs. Select any audio input for distribution of the audio signal to all

outputs simultaneously. Incoming audio signals are converted to allow all optical and coaxial outputs to operate

simultaneously.

Supporting sampling rates up to 192kHz and audio signal up to 5.1CH, this device maximises audio distribution to

multiple outputs. A typical application for this switching and distribution device is for use in retail environments

such as a hi- store. It allows multiple audio source signals to be easily managed for demonstration of sources and

ampliers to a consumer, for example.

Control is via selection buttons on the device or via IR or RS-232.

FEATURES

• Supports 4x Coaxial + 4x Optical Inputs, and 10x Coaxial + 10x Optical outputs

• Supports LPCM 2-Channel Audio signals

• Supports up to 192kHz Sampling Rate

• Supports Dolby & DTS audio bypass

SPECIFICATIONS

Input: 4x RCA (4x Coaxial 2 Channel LPCM

/ Dolby Digital / DTS), 4x Toslink (4x

Optical 2 Channel LPCM / Dolby

Digital / DTS), 1x 3.5mm Stereo mini-

jack (1x Infra Red Receiver), 1x 9pin

Dsub (1x RS-232 Data)

Output: 10x RCA (10x Coaxial 2 Channel

LPCM / Dolby Digital / DTS), 10x Toslink

(10x Optical 2 Channel LPCM / Dolby

Digital / DTS)

Power: 5V/1.2A DC (US/EU standards,

CE/FCC/UL certied)

Dimensions: 438mm (W) x 130mm (D) x 45mm (H)

Gross Weight: 2360g

Net. Weight: 1580g

Packaging: Boxed

New Product