OWNER’S MANUAL
FORM: OM-675 133 105E
July 1997
Running Gear/Cylinder Rack (042 453, And 042 454)
5
WARNING
ELECTRIC SHOCK can kill.
• Do not touch live electrical parts.
• Turn Off welding power source and input disconnect
device.
• Disconnect input plug or power conductors from
deenergized supply BEFORE moving welding
power source.
CYLINDERS can explode if damaged.
• Keep cylinders away from welding and other
electrical circuits.
• Never touch cylinder with welding electrode.
• Always secure cylinder to running gear, wall, or
other stationary support.
FALLING EQUIPMENT can cause injury
and damage, OVERSIZED CYLINDER
can cause tipping.
• Move unit with proper handcart.
• If using a fork lift vehicle, secure unit on a skid.
• Never lift unit with cylinder attached.
• Maximum cylinder weight is 20 lb (9 kg).
ST-123 906-G / Ref. ST-800 150-A
To mount welding power source shown,
insert brackets (19) through the two
middle slotted holes of the tray (2).
To mount plasma cutter (not shown), in-
sert brackets (19) through the four corner
slotted holes of the tray (2).
Remove paint from axle grooves (11) be-
fore installing retaining rings (12)
Tools Needed:
1/4, 3/8, 7/16, 1/2 in
Description (Qty)
Part
No.
Item
No.
1 108 940 Screw, 1/4-20 x 3/4 (11)
2 132 685 Tray (1)
3 602 207 Washer, 1/4 lock (15)
4 601 865 Nut, 1/4-20 (15)
5 132 688 Holder Strip (1)
6 134 359 Mounting Bracket (2)
7 604 804 Screw, No. 8 x 3/8 (2)
8 138 189 Support Bracket (1)
137 653
.
Caution Label (1)
9 095 094 Wheel, 6 in (2)
10 602 247 Washer, 17/32 flat (2)
11 109 662 Axle (1)
12 081 960
.
Retaining Ring (2)
13 109 670 U-Bolt, 1/4-20 x 9/16 (2)
14 109 664 Base Pan (1)
15 109 318 Caster, 2-1/2 in (2)
16 602 211 Washer, 5/16 lock (2)
17 604 537 Nut, 5/16-18 (2)
18 132 683 Mounting Bracket (2)
19 132 689 Mounting Bracket (4)
20 132 686 Tray Pan (1)
Be sure to provide Model when ordering
replacement parts.
5
1
3
4
6
4
3
1
2
1
20
15
16
17
1
4
3
14
13
9
10
12
11
4
3
8
7
6
4
18
3
19
1
Figure 1. Installing Running Gear/Cylinder Rack
-
1
Miller RUNNING GEAR/CYLINDER RACK 042453 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miller RUNNING GEAR/CYLINDER RACK 042454 Owner's manual
-
Miller RUNNING GEAR THREE-PHASE 042886 Owner's manual
-
-
-
-
-
-
-
-
Miller KC000000 Owner's manual
