Ventura 390468-10 Operating instructions

Brand: Ventura

Model: 390468-10

Type: Operating instructions

This manual is also suitable for

390403-10

Headset Spacer Installation Instructions

Remove top cap and stem from steerer tube. Place spacers under stem on steerer tube until stem is in

the desired position. The top of the stem must be at least 3mm above the top of the steerer tube. If the

stem is in the desired position and there is still steerer tube visible above stem, place spacers on steerer

tube above the stem until there is 3mm of spacer above top of steerer tube. Place top cap on and

tighten until snug. Align stem with front wheels and then tighten stem with torque wrench to the stem’s

specifications.

1

Ventura 390468-10 Operating instructions

Brand: Ventura

Model: 390468-10

Type: Operating instructions

This manual is also suitable for

390403-10

Other documents