2
1. Contents
2. Welcome Section
3. General Information and Safety Instructions
4. Controls
5. Instructions
6. Warranty Card
Contents
1
1
57798
Welcome Section
2
3
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support
Model Number: XXXXX
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support
Model Number: XXXXX
Congratulations!
You have made an excellent choice with the purchase of this quality
WORKZONE® product.
By doing so you now have the assurance and peace of mind which comes
from purchasing a product that has been manufactured to the highest
standards of performance and safety, supported by the high quality
standards of Aldi.
We want you to be completely satisfied with your purchase so this
WORKZONE® product is backed by a comprehensive manufacturer’s 3 year
warranty and an outstanding after sales service through our dedicated
helpline.
We hope you enjoy using your product for many years to come.
If you require technical support or in the unlikely event that your purchase
is faulty please telephone our helpline for immediate assistance. Faulty
product claims made within the 3 year warranty period will be repaired or
replaced free of charge provided that you have a satisfactory proof of
purchase (keep your till receipt safe!). This does not affect your statutory
rights. However be aware that the warranty will become null and void if the
product is found to have been deliberately damaged, misused or
disassembled.
2
57798
General Information and Safety
Instructions
3
3
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support
Model Number: XXXXX
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support
Model Number: XXXXX
This DAB radio can be powered by 4 x size c batteries.
Do not dispose of batteries in your household waste.
Please contact your local authority for details on safe
disposal.
• Never throw batteries into a fire or expose to excessive
heat sources.
• If batteries are swallowed, please seek immediate
medical attention.
• Always ensure correct +/- polarity when installing
batteries.
• Do not recharge non rechargeable batteries.
Electrical and electronic equipment (EEE) contains
materials, parts and substances, which can be dangerous to
the environment and harmful to human health if waste of
electrical and electronic equipment (WEEE) is not disposed
of correctly.
Equipment, which is marked with the WEEE logo (as shown
on the left), should not be thrown away with your
household waste. Contact your Local Authority Waste
Disposal Department , as they will be able to provide details
of the recycling options available in your area.
3
57798
4
Controls
1. Carrying Handle
2. Antenna
3. LCD Display
4. Tuning- button
5. Vol+ button
6. Vol- button
7. Tuning+ button
8. Enter button
9. Alarm/Sleep button
10. Speaker
11. Info/Setup button
12. Memory up button
13. Memory button
14. DAB/FM button
15. Auto-Scan button
16. Standby button
17. DC jack
18. Aux-in jack
19. Battery compartment
4
57798
5
Instructions
FOR DAB MODE
Press the DAB/FM button to select DAB.
Auto Tuning
Press the AUTO-SCAN button. ‘AUTOTUNE FULL SCAN’ will appear on the
display, and the number of DAB stations will show in the upper right corner.
The radio will automatically play the first station.
Press TUNING+ / TUNING- to choose the next or previous station.
Manual Tuning
Press and hold the ENTER button until ‘MANUAL TUNE’ icon appears in the
display.
Press TUNING+ / TUNING- to select the station you require.
Note: There may be a few seconds delay for the radio to tune into your
desired station.
DAB Radio Pre-sets
To store the desired DAB station, press the MEMORY button. ‘Preset
Empty X’ (X is the current preset number) will appear in the display.
Press MEMORY UP button repeatedly to select the preset number (1-8)
you want to store, then press ENTER to store it.
Repeat the same procedure to store up to 8 presets.
Recall Memory
Press MEMORY UP button to select the preset station required, then press
ENTER to confirm.
OPERATION
Press the Standby button to turn on the unit.
5
5
57798
6
INFO Button DAB Mode
The radio has DAB information modes which are shown on the bottom line
of the LCD display. Short press the INFO key to see the various types of DAB
information you can receive.
1. Program type - Displays the type of station content being broadcast e.g.
Classic, Pop, News etc.
2. Ensemble Freq - Displays the DAB station frequency such as 13F
239.200MHz.
3. Audio Bit Rate - Displays the data rate in kilobytes per second and the
audio mode e.g. stereo.
4. Ensemble name - Displays the name of the multiplex to which the
Digital1 network current station belongs to.
5. Signal strength - Displays the signal strength for the station being
listened to.
6. Time/Date - Displays current time and date, received off-air.
7. DLS (Dynamic Link Segment) - Scrolling text which includes messages
such as Artist and track name, phone numbers, program details, etc.
FOR FM MODE
Press the DAB/FM button to select FM.
Press the AUTO-SCAN button to begin searching for FM stations. When a
station is found, the scanning will stop and playback will start automatically.
If FM reception is poor, press the TUNING+ / TUNING- button repeatedly
to fine tune.
Pre-setting FM stations is the same method as pre-setting DAB stations.
6
57798
ALARM 1 SETTINGS
1. With the radio switched ON, or in Standby mode, press the ALARM/
SLEEP button until the Alarm1 menu appears.
2. ON / OFF will be flashing to indicate that it can be changed. Press the
TUNING+ / TUNING- button to ON. Then press ENTER to confirm.
3. The hour digits are now flashing. Press the TUNING+ / TUNING-
button to set the required time and short press the ENTER button.
4. The minutes can now be set, as described above. Again short press
the ENTER button to confirm.
5. Selecting the wake up alarm sound. (BEEP1, BEEP2, DAB or FM) is now
flashing. Short press the TUNING+ / TUNING- button to select and
short press ENTER button to save the setting and exit.
INFO Button FM Mode
The radio has six FM information modes which are shown on the bottom
line of the LCD display. Short press the INFO/SETUP button to see the
various types of FM information you can receive.
1. PTY (program type) - Displays the type of station content being
broadcast e.g. Classic, Pop, News, etc.
2. Signal strength - Displays the signal strength for the station being
played.
3. Time and Date - Displays current time and date, received off-air.
4. Station frequency - Displays the frequency of the station being played.
5. Audio mode - Displays the current audio mode setting i.e. Auto (Stereo)
or Mono.
6. Radio Text - Scrolling text which includes messages such as Artist and
track name, phone numbers, program details, etc.
7
57798
8
SWITCH OFF ALARM
To switch off the alarm when it activates, press ALARM/SLEEP button or
STANDBY button. The alarm will reset for next day.
The Alarm will switch off automatically after 59 minutes if it is left ringing.
ALARM 2 SETTING
1. With the radio switched ON, or in Standby mode, press the ALARM/
SLEEP button 2 times until the Alarm2 menu appears.
2. Follow the same steps in ALARM 1 settings to set ALARM 2.
TO CANEL THE ALARM SETTING
Press the ALARM/SLEEP button and while the Alarm settings are on the
screen,
press the TUNING+ / TUNING- button to select alarm OFF then press ENTER
to confirm.
USING THE AUX INPUT
The Auxiliary port can be used to connect any device with an Aux-In socket
such as an iPod, iPhone, smartphone or MP3 player.
1. Ensure the radio is switched to OFF.
2. Using the supplied Aux-In cable, Connect one end to the Aux-In port
on the radio and the other end to the Aux-In or headphone socket on
your device.
3. Turn the radio ON, then press STANDBY to ON.
4. Turn on your personal device to begin playing through the radio. You
can adjust the volume to your desired level using the controls on the
radio and on your device.
Note: Once the AUX cable is inserted, FM/DAB is muted but the display will
remain.
8
57798
9
SLEEP SETTING
SET THE SLEEP TIMER
1. With the UNIT switched ON and playing press & hold the SLEEP key
until the Sleep Timer appears in the display.
2. The minutes are now flashing. Short press ALARM/SLEEP button to
change the sleep time (15, 30 ,45, 60, 90mins & OFF).
3. Available Sleep time is 15 to 90 minutes, in 15 minutes increments. Set
the required time and short press ENTER to confirm.
4. The display will show the settings sleep time in the upper right corner.
5. The UNIT plays for the selected time and then switches to Standby.
CANCEL SLEEP TIMER
1. With the UNIT switched ON and playing press & hold the SLEEP key
until the Sleep Timer appears in the display.
2. The minutes are now flashing. press ALARM/SLEEP button to change
the Sleep time to OFF.
9
57798
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
